Thingiverse
MotorPixie Mini - Gimbal for the RCExplorer Tricopter V3 by Motorpixiegimbals
by Thingiverse
Last crawled date: 3 years, 1 month ago
Mini gimbal that mounts onto a custom camera plate for the RCExplorer Tricopter V3. Get the frame or directions how to build the tricopter frame here: http://www.RCExplorer.se
Some parts (camera plate, wire plates) are derived from David Windeståls brilliant designs. Find them all at RCExplorer.se
The finished gimbal weighs about 130g. A total of 200g with the GoPro Hero 3 mounted. To counter this "massive" weight, it is necessary to shift the battery to the back to balance the tricopter perfectly.
Some test footage: https://www.youtube.com/watch?v=BfNrB5eJCtg
Some parts (camera plate, wire plates) are derived from David Windeståls brilliant designs. Find them all at RCExplorer.se
The finished gimbal weighs about 130g. A total of 200g with the GoPro Hero 3 mounted. To counter this "massive" weight, it is necessary to shift the battery to the back to balance the tricopter perfectly.
Some test footage: https://www.youtube.com/watch?v=BfNrB5eJCtg
Similar models
thingiverse
free
RunCam SKYPLUS/PZ0420M mount for RCExplorer Tricopter V3 by Motorpixiegimbals
...motorpixiegimbals
thingiverse
modified nose spacer for the rcexplorer tricopter v3 to mount runcam skyplus/pz0420m board camera.
thingiverse
free
RCExplorer racing canopy for V3, V3.5 and mini tricopter by Motorpixiegimbals
...vailable at rcexplorer.se/shop.
board camera tilt is -5 to 45 degrees. mobius/runcam/gopro session plate tilt is 0 to 30 degrees.
thingiverse
free
Custom canopy for RCExplorer V3 and mini tricopter by Motorpixiegimbals
...allows you to mount a mobius style camera (up to 38mm wide) and tilt it 0 to 40 degrees.
integrated gopro mount on the top plate.
thingiverse
free
KK-Mini mount for RCExplorer tricopter v3 by Motorpixiegimbals
...for 36x36mm kk-mini flight controller (30.5x30.5mm hole spacing) and similar form factor boards such as the flip32 and flip32+....
thingiverse
free
Super Simple Gimbal - Base Plate for Tricopter by soulsk8er
... plate for tricopter by soulsk8er
thingiverse
base plate with holes for rcexplorer tricopter.
tg9e or hxt900 servos fit nicely.
thingiverse
free
RCExplorer Tricopter V3 Tarot T-2D Gimbal Mount by carrera0to60
...ng except pointing the camera straight down. i am probably going to tweak the design further to try and gain a little more slack.
thingiverse
free
Canopy for RCExplorer Tricopter V3 (50mm nose) by Motorpixiegimbals
...pport.
works best with hex screws at the boom fold. use antenna boom for securing it at the front, barbecue skewer at the back.
thingiverse
free
RCExplorer Mini Tricopter Landing gear / leg by vsemaphore
...hore
thingiverse
small landing gear/leg designed for rcexplorer mini tricopter (http://rcexplorer.se/product/minitricopter-kit/)
thingiverse
free
Tricopter Body Plates by Outkast65
...tricopter body plates by outkast65
thingiverse
based on the rcexplorer tricopter design. these are for 3/8" square booms.
thingiverse
free
Foldable transmitter post for RCExplorer Tricopter V3 by Motorpixiegimbals
...a holders for the rx antennae :-) (boom and 3mm plastic pole)
get the rcexplorer tricopter v3 frame at http://www.rcexplorer.se
Motorpixie
thingiverse
free
MotorPixie 2-axis gimbal for DJI Phantom 2 Vision (Final version) by Motorpixiegimbals
...o hero 3 style action cameras.
final version that replaces all previous versions.https://sites.google.com/site/motorpixiegimbals/
thingiverse
free
Tricopter Mini Racing Canopy remixed by 1Smug_Bastard
...racing canopy remixed by 1smug_bastard thingiverse originally created by motorpixie gimbals, remixed it to add vtx mounting capability and...
thingiverse
free
Blackout Spider Hex Landing Gear 2 by aikon96
...no problem: using a storm 32 gimbal controller and motorpixie mini gimbal:http://www.thingiverse.com/thing:1409456/ tarot...
thingiverse
free
Blackout Spider Hex Gimbal Mount (Storm32 + MotorPixie Mini Gimbal) by aikon96
... -> u need 2 screws (holes already at the frame) to attach it on the bottom.
please note this is a work in progress,
have fun!
thingiverse
free
MotorPixie Board of Pray by Motorpixiegimbals
... integration outrunner brushless motor
850mah 45c 3s lipo
cc3d evo flight controller running cleanflight
1mm music wire push rods
thingiverse
free
MotorPixie 2-axis gimbal Modified by datasmasher
...on of motorpixiegimbal's awesome design. changes include a pass through hole for the arm, and a modified case (coming soon).
thingiverse
free
MotorPixie 2D gimbal for Phantom 2 Vision (FC200 and Gopro Hero 3(+) edition) - Discontinued by Motorpixiegimbals
... allow for easy removal.
24/07/2014:
updated gopro enclosure and spanner to enable quick transition between fc200 and gopro (imu)
thingiverse
free
MotorPixie 2D gimbal for DJI Phantom 2 Vision (GoodLuckBuy version) - Discontinued by Motorpixiegimbals
...90
27/6/2014:
added dampener plate (body plate) for phantom 2 vision
added dampener plate (body plate) for fc40 / phantom 1
thingiverse
free
MotorPixie 2-axis gimbal for DJI Phantom 2 Vision (FC200 edition) - Discontinued by Motorpixiegimbals
...ase to make board fit within confines of box. easier access to cables. reduced height by 1mm.
note: imu box is subject to change.
Rcexplorer
thingiverse
free
RCExplorer Bicopter impossible tilt pack by Motorpixiegimbals
...t mechanisms, double that :-)
use petg or abs/asa for the motor part, forabs/asa scale the part to 101% to account for shrinkage.
thingiverse
free
RCExplorer BiCopter PDB Riser by LitterBug
... the pdb to allow the battery strap to be mounted below the pdb and wires so it doesn't pull on the wiring or pdb components.
thingiverse
free
Oblique Active Tilt mod for RCExplorer Bicopter by LitterBug
...t axis for the rcexplorer bicopter. slips on the 10x10mm carbon tube and the tilt is then mounted to the 45 degree printed beam.
thingiverse
free
sOAT Impossible Tilt Mount by LitterBug
...and the impossible tilt mounts for use on the rcexplorer bicopter. mounts on end of a 10x10 carbon tube....
thingiverse
free
BabyTri - RunCam micro swift mount and protector by Motorpixiegimbals
...runcam micro swift mount for the rcexplorer baby tricopter. https://rcexplorerse/product/babytricopter-kit/ should work for any micro camera (19mm width) like...
thingiverse
free
Baby Tricopter GoPro mount
...tricopter gopro mount thingiverse a gopro mount for the rcexplorer baby tricopter, 25 degree angle. print with a lot...
thingiverse
free
Tricopter LR Caddx Turbo Micro F2 Support
...turbo micro f2 support for my tricopter lr from rcexplorer there's also a 2 columns version for those who...
thingiverse
free
RCExplorer Tricopter round CF tube adapter
...39;ve so far test hovered this and it seems pretty solid, so should be fine for a more extended flight once the weather improves.
thingiverse
free
2020 mounting plate tarsier
...i used for mounting the tarsier board in my rcexplorer tricopter lr just screw it to the heatsink of...
thingiverse
free
Tricopter LR Impossible Tilt with Bearings and Crossfire Diversity
...by using the standard 2 gang servo arm for rcexplorer#39;s tail servo, 210dmh. it also fits a 22hv. you...
Motorpixiegimbals
thingiverse
free
Tesla Model 3 Trunk Hook Extended by KrishanuAR
...3 trunk hook extended by krishanuar thingiverse remix of motorpixiegimbals#39;s threaded trunk hook. extended it by 2cm at the...
thingiverse
free
RCExplorer Bicopter impossible tilt pack by Motorpixiegimbals
...t mechanisms, double that :-)
use petg or abs/asa for the motor part, forabs/asa scale the part to 101% to account for shrinkage.
thingiverse
free
Open Thrust stand (dead project) by Motorpixiegimbals
..., which was too slow for my needs.
f3d and step project file included, arduino code in the zip file.
https://youtu.be/tjtw_vgl0uc
thingiverse
free
Impossible Tail Duct & Mechanism by 1Smug_Bastard
...tail mechanism servo holder tall and back support. (by motorpixiegimbals https://www.thingiverse.com/thing:1035497 suggested material: nylon @ 100um see the following...
thingiverse
free
Impossible Duct & Mechanism V2 by 1Smug_Bastard
...tail mechanism servo holder "tall" and back support. by motorpixiegimbals https://www.thingiverse.com/thing:1035497) note: can also be used on a quadcopter...
thingiverse
free
MotorPixie 2-axis gimbal for DJI Phantom 2 Vision (Final version) by Motorpixiegimbals
...o hero 3 style action cameras.
final version that replaces all previous versions.https://sites.google.com/site/motorpixiegimbals/
thingiverse
free
BabyTri - RunCam micro swift mount and protector by Motorpixiegimbals
...
could i make one for your odd camera? no. fusion360 design files are included so you can make any alterations you'd like :-)
thingiverse
free
Smooth self tapping bag hook for Tesla Model 3 trunk
...from peterkrull and the excellent self tapping system of motorpixiegimbals simply print and screw on to the threaded bolt...
thingiverse
free
12864 LCD Display Stand (remix)
...ramps 1.4 3d printer - enclosure" model made by motorpixiegimbals the display frame is the same, i just needed...
thingiverse
free
TUSH-E The ultimate Spool Holder - Elongated by Motorpixiegimbals
...ctly, so redraw the whole thing in fusion 360. included f3d file for fusion360.
added 2.3mm pilot holes for 3mm screws if needed.
Tricopter
3d_export
$5
Moon copter 3D Model
...model 3dexport spaceship mooncopter tricopter aircraft drone helicopter robot rctricopter moon copter 3d model manu.kvs16051 93671...
thingiverse
free
Baby Tri KST servo by jhendrix
...imp_tilt_baby_tri_kst_billyd.stl. added tabs to go into slots on baby tricopter ...
thingiverse
free
Tricopter LR 267 Servo Mechanism by Mentor4
...900kv-3-6s-or-2400kv-3-4s-brushless-motor-for-rc-drone-fpv-racing-p-1455704.html?rmmds=myorder&id=519231&cur_warehouse=cz
thingiverse
free
Tricopter Switchblade by FPV_Pilot
...abs, bed temp 110c and nozzle 240c
turn on fan only on bridging holes and overhangs. to 80%
by using multi process slicing in s3d
thingiverse
free
TriCOPTER600 by DAquad
...ve
look at the pictures to get an idea on how to place everything
got confused? need help? please comment below (;
enjoy building
thingiverse
free
Tri-scrab Nano tricopter 168mm by elpet
... print with 2 layers of base, 2 contour, 0 upper and without filling. photos of tri-nano mounted and 100% operational, soon video
thingiverse
free
Impossible Tail Duct & Mechanism by 1Smug_Bastard
...mechanism by 1smug_bastard thingiverse 5" duct for use with tricoptermini tail assembly or bicopter. requires imposible tail mechanism servo...
thingiverse
free
Impossible Duct & Mechanism V2 by 1Smug_Bastard
...1smug_bastard thingiverse 5" duct / mechanism for use with tricoptermini or bicopter tail assembly. mechanism can tilt upwards of...
thingiverse
free
Micro tricopter up by edat
...on arm for esc integration and yaw arm for use f623zz
thank's elpet for your disign
https://www.thingiverse.com/thing:1663649
thingiverse
free
Runcam 2 to GoPro mount adapter - slanted forward by orcen92
...place between the camera and the fuselage of the tricopter so i modified the remixed mount and slanted it...
Gimbal
3d_ocean
$29
Drone Quadrocopter With Camera Rigged
...quadrocopter with camera rigged 3docean aircraft camera dron fly gimbal gopro propeller quadrocopter rc riged sky sport spy toy...
cg_studio
$55
Drone Quadrocopter With Camera Rigged3d model
...fly wing propeller rc video camera sky dron spy gimbal gopro riged aircraft toy .obj .fbx .max .3ds -...
3ddd
free
Foucault's Iron Orb
...physicist léon foucault's gyroscope inspired our openwork globe. its double-gimbal frame is built of iron around a nucleus of...
3d_export
$5
concentrate box
...concentrate box 3dexport concealer box with handle and gimbal ...
3d_export
$20
splashdrone gimbal camera
...nsions. all textures used have been included. thank you for purchasing this model!! click on my username to see more of my models
3d_export
$40
splashdrone 3 plus with gimbal camera
...nsions. all textures used have been included. thank you for purchasing this model!! click on my username to see more of my models
turbosquid
$1
Yuneec Save Stick for Gimbal
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$88
DJI Phantom 2 Quadcopter with gimbal for GoPro HERO4 or 3
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
thingiverse
free
Feiyutech Mini 3D Camera mount 42mm height. Thieye E7 by TurboCinqy
...20mm strap. 2 closed loops for strap will decrease gimbal ...
thingiverse
free
Joystick base for the valve knuckle by PhotonP
...0.2 layer heigth. if the thing squeaks, lubricate the gimbal sphere. be sure to use a lubricant that will...
V3
3ddd
$1
Curtain v3
...curtain v3
3ddd
штора: полупрозрачная
материал: vray
3ddd
$1
tree-snow v3 / дерево в снегу v3
..., снег , дерево
snowflowpro конвертирован в меш
3ddd
$1
Вензель V3
...amp;nbsp;http://3ddd.ru/3dmodels/show/diekorativnyi_eliemient_24 http://3ddd.ru/3dmodels/show/liepnoi_diekor_9
cg_studio
$89
Human heart animated v33d model
...ery
.obj .lwo .fbx .c4d .max - human heart animated v3 3d model, royalty free license available, instant download after purchase.
cg_studio
$129
Generic Hatchback v3 20163d model
...d .3ds .obj .max .lwo .fbx - generic hatchback v3 2016 3d model, royalty free license available, instant download after purchase.
cg_studio
$45
Hughes500 Helicopter V33d model
...odel
cgstudio
.3ds .lwo .mb - hughes500 helicopter v3 3d model, royalty free license available, instant download after purchase.
3d_ocean
$12
Old Stone Wall Surface Textures V3
...old stone wall styles. great for your creativity for 3d programs and more. about files png/jpg seampless, tileable 2048...
3d_ocean
$8
Exotic Tree V3
...hat ever use you want in your production. hd resolution , coming with render set-up. easy to modify or break into pieces! for ...
3d_ocean
$9
3d Medicine Bottles With 3 Sides V3
...e single render. main file 3d max 2009 file with vray 1.5 render engine. fbx,3ds,obj 3d file formats included. sample label jp...
3ddd
$1
Curtain v3
...curtain v3
3ddd
полупрозрачная штора v3
Mini
3d_export
$99
Citroen Relay Van L1H1 2015 3D Model
...van l1h1 car cars light vehicle van france cargo mini bus commercial transport auto avto high poly 2015 citroen...
3d_export
$99
Suzuki Jimny 2013 3D Model
...2013 2014 2015 2016 2-door suv crossover off-road 4x4 mini compact small japan japanese suzuki jimny 2013 3d model...
3d_export
$89
Toyota Aygo 2013 3D Model
...2013 3d model 3dexport toyota aygo car small citycar mini japan hatchback car auto automobile hb 2013 2012 toyota...
3d_export
$15
Low Poly Mini Golf Hole C4H2 3D Model
...utt club ball hole course goal flag par sport sports low
low poly mini golf hole c4h2 3d model tronitecgamestudios 71749 3dexport
3d_export
$15
Low Poly Mini Golf Hole C4H4 3D Model
...utt club ball hole course goal flag par sport sports low
low poly mini golf hole c4h4 3d model tronitecgamestudios 71751 3dexport
3d_export
$15
Low Poly Mini Golf Hole C4H18 3D Model
...tt club ball hole course goal flag par sport sports low
low poly mini golf hole c4h18 3d model tronitecgamestudios 71765 3dexport
3d_export
$99
Citroen C4 Cactus 2015 3D Model
...2017 concept scifi car france french family crossover allterrain mini suv hatchback offroad fun citroen c4 cactus 2015 3d...
3d_export
$10
Mini Loader 3D Model
...port
miniloader construction excavator loader crane lift machine vehicle industrial
mini loader 3d model sanchiesp 93521 3dexport
3d_ocean
$85
Vauxhall Vivaro Van 2015
...auto avto britain bus cars england great high mini minian model poly quality transport uk utility van vauxhall vehicle...
3d_ocean
$9
Tree Shelf Set
...drawer shelf unique wood shelf looks like tree wiht mini drawer. no ornament...