Thingiverse
Motor Test Stand (Dynamometer) by bjarnet
by Thingiverse
Last crawled date: 4 years, 2 months ago
3D-printable parts for creating small modular motor test stands.
The naming convention for the NEMA motor mounting plates is as follows:
LMP-NEMA[A]-[B]-[C]-M[D]
[A]: NEMA frame size
[B]: Flange bore diameter in mm
[C]: Mounting hole spacing in mm
[D]: Mounting hole diameter in mm
Please see this Instructable for detailed assembly instructions.
The plates have been tested with the following motors:
LMP-NEMA17-22-31-M3: Anaheim BLY173D
LMP-NEMA17-25.4-25.4-M4: Anaheim BLY172S
LMP-NEMA23-38.1-47.2-M5: Anaheim BLWS232D
LMP-M800006: EMsynergy M80006
The naming convention for the NEMA motor mounting plates is as follows:
LMP-NEMA[A]-[B]-[C]-M[D]
[A]: NEMA frame size
[B]: Flange bore diameter in mm
[C]: Mounting hole spacing in mm
[D]: Mounting hole diameter in mm
Please see this Instructable for detailed assembly instructions.
The plates have been tested with the following motors:
LMP-NEMA17-22-31-M3: Anaheim BLY173D
LMP-NEMA17-25.4-25.4-M4: Anaheim BLY172S
LMP-NEMA23-38.1-47.2-M5: Anaheim BLWS232D
LMP-M800006: EMsynergy M80006