Thingiverse
![Monstertruck Mashup by Doxster](/previews/8768529.jpg)
Monstertruck Mashup by Doxster
by Thingiverse
Last crawled date: 3 years, 1 month ago
Hello everyone!
This is my first design I release to the public, and my contribution to the #RemixChallenge.
You can see me showcasing how it works on the following link - https://youtu.be/4MvTmCAEniY
I wanted to do something big with alot of parts and see if I could make it work together, I based my design around the Mini Monster Truck With Suspension and kept building from there. There are alot of pieces in this Mashup/Kit/Playset. I'll go through it with you one by one, how I thought and my advice for your best printing experience.
I've oriented every part so that it best fits my needs on a Original Prusa MK2. Your orientation might be different though with other printers, I advice you to take my pointers as hints only, you know your printer and what it's capable of.
Mini Monstertruck - http://www.thingiverse.com/thing:1557428
I wanted to make the truck modular, with lots of different tools and accessories to make it last longer for children playing with it. The model is great from the start, all I had to do was to cut some holes on the sides of the car and one in the front to fit the tool holders I designed. In the pictures the front hole is a bit low and isn't giving alot of room for error, this is FIXED in the uploaded version. Sorry, no time to reprint before the deadline. I also added a hitch to the back of the car that allows you to pull the remixed Brawny Boxcar. You will want to use supports for this one.
Tool Holders - These are my own design, they fit very well in the holes on the car. You might have to play around with them a bit, I designed them to be a tight fit so that they won't come loose. You will need 3 of these per car.
Brawny Boxcar - http://www.thingiverse.com/thing:274774
Since we are getting alot of accessories to our Monstertruck, we need somewhere to store them. This is where the boxcar comes in. The boxcar is designed as a train cart, so I cut off the bottom of the boxcar and the top of the Monstertruck and merged them together. Now we have a Brawny Monsterboxcar. I had to cut the top up to make it in to a lid, and open up the inside to fit our tools. To be able to be pulled by the truck I opened up half a hole in the front of the boxcar and added a second hitch. You definitley will want to use supports for this one, up until midway anyway. Once you get up to the boxcar itself I didn´t need any supports.
Boxcar Roof - I know it looks like it doesn't fit in the pictures. It does fit, but it's a very tight fit and hard to open up, during the photos I didn't push it all the way down. The uploaded version is FIXED with a bit more space for more ease of use. Sorry, no time to reprint it before the deadline. You will probably need supports for the outer edge, unless you find a creative way to position it on your printer.
Hitch - This is my own design, it's only purpose is to connect the Monstertruck and the Boxcar. No supports needed.
Tunnel Drill - This is my own design. It's designed to sit in the front of the car. If you want a beefier one I recommend scaling it 125-150%. You will want supports from the buildplate only on this one.
Riot Shield - This is my own design. It's designed to sit in the front of the car. Originally I wanted to remix a Snow Plow I found here on thingiverse. The model was broken and was a pain to repair so I ended up modeling this one from scratch instead, and I'm glad I did. It looks really cool coupled with two miniguns! No supports needed on this one.
Babies First Mace - http://www.thingiverse.com/thing:166802
Remixed. Such a good model, a joy to work with. Scaled it down and joined the three pieces together and added my own fitting tool to it. Supports from the buildplate only on this one.
Beefy Arms - http://www.thingiverse.com/thing:217849
Remixed. I absolutley love how these turned out! I scaled them up to 800% and added holes for my tool holders. They make the Monstertruck look very hardcore! You might want to play around a bit with positioning this one, I found that fists up in the air and shoulders on the buildplate worked will. I used both a raft and supports on this one.
Minigun - http://www.thingiverse.com/thing:512286
Remixed. This model was badly broken and a pain to work with. I managed to get it repaired though and I'm very glad I didn't give up. Two of these makes the truck look ready for war! If you´re printing it standing up, like I did, you definitley want to use a raft on this one. There isn't a big footprint on it in that orientation.
The following accessories are designed by Xian Brock at WuLongToys and remixed by me. You can find Xian's work here - http://www.thingiverse.com/WuLongToys
Rocket Launcher - This is designed to fit on top of the trailer hitch, even when the boxcar is coupled with the monstertruck. Originally I wanted even more accessories for this mounting point but time was big issue here. This turned out really cool though, you can turn it in any direction you want. You want supports from the buildplate only on this one.
Scimitar - Remixed. Added my own fitting tool. This is a tricky one to print. I recommend using a raft on this one. Nu supports needed though.
Jet Pack / Thruster - Remixed. Added my own fitting tool. Easy to print with supports from the buildplate.
Shields - Remixed. Had to fill up the front for it to print well, it lost a little characted that Xian had given it but resulted in a much more reliable print. Added my own fitting tool to them. No supports needed.
Wings - Remixed. These are actually two of Xians models that I merged together. I really think the gatling gun outdid itself in the position I gave it, and of course printed in jet black made it look really stealthy! Also added a hole to work with my tool holders. No supports needed.
I used Simplify3D for slicing all of the models. They are printed on a Original Prusa MK2, you can find my S3D profile here if you are unsure how to print them - http://s000.tinyupload.com/?file_id=21571669778301285054
Summary: This was a very fun mashup to put together. I constantly came up with new cool ideas and had to restrain myself due to the time frame. There is definitley more to be done to this kit! If you can imagine it you can make it!
All of the creation of new parts and remixing was done in Tinkercad.
This is my first design I release to the public, and my contribution to the #RemixChallenge.
You can see me showcasing how it works on the following link - https://youtu.be/4MvTmCAEniY
I wanted to do something big with alot of parts and see if I could make it work together, I based my design around the Mini Monster Truck With Suspension and kept building from there. There are alot of pieces in this Mashup/Kit/Playset. I'll go through it with you one by one, how I thought and my advice for your best printing experience.
I've oriented every part so that it best fits my needs on a Original Prusa MK2. Your orientation might be different though with other printers, I advice you to take my pointers as hints only, you know your printer and what it's capable of.
Mini Monstertruck - http://www.thingiverse.com/thing:1557428
I wanted to make the truck modular, with lots of different tools and accessories to make it last longer for children playing with it. The model is great from the start, all I had to do was to cut some holes on the sides of the car and one in the front to fit the tool holders I designed. In the pictures the front hole is a bit low and isn't giving alot of room for error, this is FIXED in the uploaded version. Sorry, no time to reprint before the deadline. I also added a hitch to the back of the car that allows you to pull the remixed Brawny Boxcar. You will want to use supports for this one.
Tool Holders - These are my own design, they fit very well in the holes on the car. You might have to play around with them a bit, I designed them to be a tight fit so that they won't come loose. You will need 3 of these per car.
Brawny Boxcar - http://www.thingiverse.com/thing:274774
Since we are getting alot of accessories to our Monstertruck, we need somewhere to store them. This is where the boxcar comes in. The boxcar is designed as a train cart, so I cut off the bottom of the boxcar and the top of the Monstertruck and merged them together. Now we have a Brawny Monsterboxcar. I had to cut the top up to make it in to a lid, and open up the inside to fit our tools. To be able to be pulled by the truck I opened up half a hole in the front of the boxcar and added a second hitch. You definitley will want to use supports for this one, up until midway anyway. Once you get up to the boxcar itself I didn´t need any supports.
Boxcar Roof - I know it looks like it doesn't fit in the pictures. It does fit, but it's a very tight fit and hard to open up, during the photos I didn't push it all the way down. The uploaded version is FIXED with a bit more space for more ease of use. Sorry, no time to reprint it before the deadline. You will probably need supports for the outer edge, unless you find a creative way to position it on your printer.
Hitch - This is my own design, it's only purpose is to connect the Monstertruck and the Boxcar. No supports needed.
Tunnel Drill - This is my own design. It's designed to sit in the front of the car. If you want a beefier one I recommend scaling it 125-150%. You will want supports from the buildplate only on this one.
Riot Shield - This is my own design. It's designed to sit in the front of the car. Originally I wanted to remix a Snow Plow I found here on thingiverse. The model was broken and was a pain to repair so I ended up modeling this one from scratch instead, and I'm glad I did. It looks really cool coupled with two miniguns! No supports needed on this one.
Babies First Mace - http://www.thingiverse.com/thing:166802
Remixed. Such a good model, a joy to work with. Scaled it down and joined the three pieces together and added my own fitting tool to it. Supports from the buildplate only on this one.
Beefy Arms - http://www.thingiverse.com/thing:217849
Remixed. I absolutley love how these turned out! I scaled them up to 800% and added holes for my tool holders. They make the Monstertruck look very hardcore! You might want to play around a bit with positioning this one, I found that fists up in the air and shoulders on the buildplate worked will. I used both a raft and supports on this one.
Minigun - http://www.thingiverse.com/thing:512286
Remixed. This model was badly broken and a pain to work with. I managed to get it repaired though and I'm very glad I didn't give up. Two of these makes the truck look ready for war! If you´re printing it standing up, like I did, you definitley want to use a raft on this one. There isn't a big footprint on it in that orientation.
The following accessories are designed by Xian Brock at WuLongToys and remixed by me. You can find Xian's work here - http://www.thingiverse.com/WuLongToys
Rocket Launcher - This is designed to fit on top of the trailer hitch, even when the boxcar is coupled with the monstertruck. Originally I wanted even more accessories for this mounting point but time was big issue here. This turned out really cool though, you can turn it in any direction you want. You want supports from the buildplate only on this one.
Scimitar - Remixed. Added my own fitting tool. This is a tricky one to print. I recommend using a raft on this one. Nu supports needed though.
Jet Pack / Thruster - Remixed. Added my own fitting tool. Easy to print with supports from the buildplate.
Shields - Remixed. Had to fill up the front for it to print well, it lost a little characted that Xian had given it but resulted in a much more reliable print. Added my own fitting tool to them. No supports needed.
Wings - Remixed. These are actually two of Xians models that I merged together. I really think the gatling gun outdid itself in the position I gave it, and of course printed in jet black made it look really stealthy! Also added a hole to work with my tool holders. No supports needed.
I used Simplify3D for slicing all of the models. They are printed on a Original Prusa MK2, you can find my S3D profile here if you are unsure how to print them - http://s000.tinyupload.com/?file_id=21571669778301285054
Summary: This was a very fun mashup to put together. I constantly came up with new cool ideas and had to restrain myself due to the time frame. There is definitley more to be done to this kit! If you can imagine it you can make it!
All of the creation of new parts and remixing was done in Tinkercad.
Similar models
thingiverse
free
![Tool Rack with Rotor Riot Symbol by eXtreme89](/t/8767234.jpg)
Tool Rack with Rotor Riot Symbol by eXtreme89
...thingiverse
wanted my own tool rack for my tools and thought that i can design one that fits my needs better than one i can buy.
thingiverse
free
![Cricut Tool Holder by galaxygirl03](/t/5048259.jpg)
Cricut Tool Holder by galaxygirl03
... 2 of it as well as a file for the inserts to hold the tips which will leave a space in the bottom of each side for spare blades.
thingiverse
free
![Pegboard Hook by CycleNinja](/t/8996709.jpg)
Pegboard Hook by CycleNinja
... together to hold a cellphone or tablet.
i have not tested it to failure. if you want to do some testing, please add a comment.
thingiverse
free
![Lack Table 3D Printer riser by over__crash](/t/8371189.jpg)
Lack Table 3D Printer riser by over__crash
...design for a lack table 3d printer, but none of them fitted my needs. i created my own, it's not the best but it work for me.
thingiverse
free
![Ender 3 Pro Tool Holder with SD Cards and Calipers by levinath](/t/8067053.jpg)
Ender 3 Pro Tool Holder with SD Cards and Calipers by levinath
...ipers so i extended the overhang and added a slot for the calipers to hang.
also flipped the file so you don't need supports.
thingiverse
free
![Remix of DIY Dremel CNC by NikodemBartnik by FrancescoF](/t/8263276.jpg)
Remix of DIY Dremel CNC by NikodemBartnik by FrancescoF
...rcad.com/things/dbuvweouf7n
(or search for "cnc 8mm"). sign up to tinkercad and you'll can copy the entire project.
thingiverse
free
![Modular 2020 Tool Holder by DuMonYu](/t/8679781.jpg)
Modular 2020 Tool Holder by DuMonYu
...own mounts.
if you make, customize your own mounts, or remix then please let me know. i'd love to see what you come up with!
3dwarehouse
free
![Mad Max - Hood Ornament - Mask Of The Pious - hitch cover](/t/11016668.jpg)
Mad Max - Hood Ornament - Mask Of The Pious - hitch cover
...,, so i decided to start from scratch and model my own. i made two versions: one plain and one with mad max written on the visor.
thingiverse
free
![Tool Holder with integrated Slot Cover](/t/4734356.jpg)
Tool Holder with integrated Slot Cover
...rs by ximes for the top-front, scale one of them to be 125 mm instead of 165 mm, and it should butt up perfectly with this remix.
thingiverse
free
![Mk2 Tool Holder by Jakester5112](/t/8691407.jpg)
Mk2 Tool Holder by Jakester5112
...did was remove the sd card slots (i don't need them because i run octoprint) and added in a holder for my print removal tool.
Monstertruck
cg_studio
$110
![MonsterTruck gc13d model](/t/680805.jpg)
MonsterTruck gc13d model
...gc13d model
cgstudio
.3ds .lws .mb - monstertruck gc1 3d model, royalty free license available, instant download after purchase.
3d_export
$25
![Monster truck 3D Model](/t/138601.jpg)
Monster truck 3D Model
...monster truck 3d model 3dexport truck jeep monstertruck cartoon funny happy car wheel big lovely monster truck...
cg_studio
$25
![Monster truck3d model](/t/747634.jpg)
Monster truck3d model
...monster truck3d model cgstudio truck jeep monstertruck cartoon funny happy car wheel big lovely .obj .fbx...
thingiverse
free
![MonsterTruck - SuperThings compatible by thetro](/t/8080489.jpg)
MonsterTruck - SuperThings compatible by thetro
...monstertruck - superthings compatible by thetro
thingiverse
a simple toy monster truck - compatible to superthings figures.
thingiverse
free
![MonsterTruck simplified cnc/laser by ZenziWerken](/t/8705782.jpg)
MonsterTruck simplified cnc/laser by ZenziWerken
...s, you just need to find a solution for the engraved tires.
visit https://www.zenziwerken.de/en/spielsachen for more toy designs.
thingiverse
free
![RC Rim by Attila_D](/t/8861774.jpg)
RC Rim by Attila_D
...rim by attila_d thingiverse rc rim for sword 1:10 monstertruck ...
thingiverse
free
![Atelier de réparation/révision Modèle RC by Dan13l](/t/8794717.jpg)
Atelier de réparation/révision Modèle RC by Dan13l
...réparation/révision modèle rc by dan13l thingiverse dessiné pour le monstertruck wltoys...
thingiverse
free
![Airless-Tire 1:5 Lighter version by Piinu](/t/9027891.jpg)
Airless-Tire 1:5 Lighter version by Piinu
...this one im going to print for my 1:5 monstertruck then i will schow u...
thingiverse
free
![Mini Monster Truck/Car/Smart With Suspension - REMIX by brimstone326](/t/8773059.jpg)
Mini Monster Truck/Car/Smart With Suspension - REMIX by brimstone326
...cut off the top and added the tongue. the monstertruck and monsterstealth bodies were my design and drawn in...
Mashup
thingiverse
free
![Mashup-Rex by edditive](/t/8708288.jpg)
Mashup-Rex by edditive
...er. just check out the post on my blog for details https://edditiveblog.wordpress.com/2017/05/14/the-meshmixer-mashup-mashup-rex/
thingiverse
free
![Mashup by Phill_Luland_3D_Printed_Art](/t/8742684.jpg)
Mashup by Phill_Luland_3D_Printed_Art
...mashup by phill_luland_3d_printed_art
thingiverse
im searching for a new style here..
thingiverse
free
![Umbral Skull Mashup by OutOfBacon](/t/8144181.jpg)
Umbral Skull Mashup by OutOfBacon
...umbral skull mashup by outofbacon
thingiverse
mashup of a nothic and fleshmound to fill the role of and umbral skullbearer.
thingiverse
free
![Mashup-Yoda by edditive](/t/8690147.jpg)
Mashup-Yoda by edditive
...ll details about this design, check out my blog post https://edditiveblog.wordpress.com/2017/06/25/mashup-yoda-download-for-free/
thingiverse
free
![Mashup DevilSta by yzorg](/t/9067468.jpg)
Mashup DevilSta by yzorg
...mashup devilsta by yzorg
thingiverse
just mashing up
thingiverse
free
![Kodama mashup](/t/4901646.jpg)
Kodama mashup
...kodama mashup
thingiverse
lzys/timfous head on dretzas body. also slightly re-sculpted.
does need support
thingiverse
free
![Mickey Jack mashup by HauntFreaks](/t/8866888.jpg)
Mickey Jack mashup by HauntFreaks
...e / jack skellington mashup....
another image i found... vectorized it, then extruded it....
something neat for those disney fans
thingiverse
free
![Pimax VRLensLabs mashup](/t/4867884.jpg)
Pimax VRLensLabs mashup
... for a set of oculus vr lens lab lenses. the mount design by pimax isn't so good, and i haven't actually used these. ymwv
thingiverse
free
![Action Hero Mashups by bwevans](/t/9051285.jpg)
Action Hero Mashups by bwevans
...22. openscad, meshmixer, and meshlab were all put to use in these mashups. openscad source files can be found in the zip archive.
thingiverse
free
![Triangular Mashup by SteedMaker](/t/8304531.jpg)
Triangular Mashup by SteedMaker
...triangular mashup by steedmaker
thingiverse
an experiment in form and repetition.
it is designed to print without supports.