Mombasa Inlay/Organizer (with Quick Setup System) by sbellon

Last crawled date: 3 years, 3 months ago

This is an inlay and playing organizer for the board game Mombasa.
Space inside the box (28 cm x 28 cm is required) is filled completely, so that vertical or horizontal box storage works.
This time I designed it so that it should work for sleeved cards as well as for unsleeved ones. There should also be plenty of space for the Mombasa GeekUp Bit Set or the Cooked Books mini expansion.
The trading posts are stored on a grid inside a box. The idea is to take the four grids with the 15 trading posts each out of the box and place them directly on the playing board. I provide two grid versions, a tighter one (House_Tray_Tight_x4.stl) which I recommend to use if you trading posts easily fit. If the tolerance is not sufficient, you can use House_Tray_Loose_x4.stl instead. Just print one tight one (~10 g of filament) and test with all your trading posts.
If your print bed is large enough, you can print Spacer_Monolith.stl, if your print bed is smaller than 28 cm, I have a split version and you can print Spacer_Left.stl and Spacer_Right.stl instead.
All STL files are oriented for printing. If your printer does fine with small overhangs, there is no need for support. Clearance between moving/sliding parts has been calculated with 0.1 mm.