Cults
![Modus Predator MK8 Cooling mod.](/previews/2983085.jpg)
Modus Predator MK8 Cooling mod.
by Cults
Last crawled date: 6 years, 3 months ago
Like Doc brown once said "If you're gonna design a Time Machine, why not do it with some style!"
I have a few cooling mods that didn't make the build plate I also will release, Aliens themed, Doctor who etc. I made this for myself, for fun - it's not perfect but the first print was good enough to use, could have some improvements but as I said, it was just a fun project, but I posted this on facebook and had about 100 requests to post the files, so here they are, I never really intended to upload it.
Unlike alot of other cooling ducts, this is not designed to blow on the tip of your print. This was designed for a large format printer. I am printing up to 400mm wide and fast, so the airflow needs to be more directed at the bed rather than the tip for my needs. You can of course angle the pipes in Blender or another modelling program if you need more of an angle.
I recently got a Wombot Modus and wanted to alter the cooling in it as the stock one was too aggressive and also cooled down the nozzle too much during the print rather than just the plastic which led to some dramatic temperature drops and cold extrusions. I wanted a cooler that wasn't too full-on, but did the job. It has to clear the MK8 offset, and also allow for the air intake from both fans and the filament to feed cleanly, and this was the one that seemed the most logical (RIP Spock)
Uses a 30mm fan (same as on most E3D extruders) and screws directly into the front of the existing extruder assembly.
*NOTE - You will need to cut a very small notch out of the box for the wires of the 30mm fan, It was an afterthought and instead of re-printing the entire tubes, I just made a small notch for the wires to come through and still allow the box to snap tight.
I have a few cooling mods that didn't make the build plate I also will release, Aliens themed, Doctor who etc. I made this for myself, for fun - it's not perfect but the first print was good enough to use, could have some improvements but as I said, it was just a fun project, but I posted this on facebook and had about 100 requests to post the files, so here they are, I never really intended to upload it.
Unlike alot of other cooling ducts, this is not designed to blow on the tip of your print. This was designed for a large format printer. I am printing up to 400mm wide and fast, so the airflow needs to be more directed at the bed rather than the tip for my needs. You can of course angle the pipes in Blender or another modelling program if you need more of an angle.
I recently got a Wombot Modus and wanted to alter the cooling in it as the stock one was too aggressive and also cooled down the nozzle too much during the print rather than just the plastic which led to some dramatic temperature drops and cold extrusions. I wanted a cooler that wasn't too full-on, but did the job. It has to clear the MK8 offset, and also allow for the air intake from both fans and the filament to feed cleanly, and this was the one that seemed the most logical (RIP Spock)
Uses a 30mm fan (same as on most E3D extruders) and screws directly into the front of the existing extruder assembly.
*NOTE - You will need to cut a very small notch out of the box for the wires of the 30mm fan, It was an afterthought and instead of re-printing the entire tubes, I just made a small notch for the wires to come through and still allow the box to snap tight.
Similar models
cults
free
![FlashForge Creator Pro 2016 - Dual extrusion fan duct](/t/2989336.jpg)
FlashForge Creator Pro 2016 - Dual extrusion fan duct
... the fan to the extruders
i have included the solidworks file, so if you have any ideas on how to improve this design, go for it!
cults
$9
![Raise3D N2/Plus - Upgrade Cooling Fan Mount for controlled cooling](/t/2979086.jpg)
Raise3D N2/Plus - Upgrade Cooling Fan Mount for controlled cooling
...0, but attention: it could touch/hit the frame when it come into the home position. i have adjusted the end-switch to avoid this)
cults
free
![Replicator 2X Cooling Fan Duct](/t/2989298.jpg)
Replicator 2X Cooling Fan Duct
... extruder carriage than some other versions. this keeps it away from the front door hinge bolts!
helpful for pla and abs prints.
cults
free
![Anet A6 J-Hotend mod](/t/2991795.jpg)
Anet A6 J-Hotend mod
...e hotend wil come to sit. you can break this cylinder out after the print is ready, this cylinder is for support while printing.
cults
$1
![Hydroponic Pot](/t/2976455.jpg)
Hydroponic Pot
...ersion is v4 for both outer and inner. love the feel of growing plants, best part is, i just need to water the plant 1 week once.
cults
$1
![Hydroponic Pot](/t/2981576.jpg)
Hydroponic Pot
...ersion is v4 for both outer and inner. love the feel of growing plants, best part is, i just need to water the plant 1 week once.
cults
$1
![USB Fan Drone Mini Motor for Desk](/t/2979099.jpg)
USB Fan Drone Mini Motor for Desk
... polarity wire. if not, fan turn in the wrong sense (polarity) or not make strong wind (propeller).
hope you will like that.
cults
free
![Anet A6 Extruder motor cooler](/t/2993893.jpg)
Anet A6 Extruder motor cooler
...ple who do not use the "x wagen cable holder"
in the real pictures you can see the one with the x wagen cable holder.
cults
free
![E3d v6 Adapter for Flyingbear P902](/t/2977225.jpg)
E3d v6 Adapter for Flyingbear P902
...n works great as well!
please note that this is a work in progress project, so you may need some minor adjustments mounting it.
cults
$1
![Protects iPhone cable](/t/2993012.jpg)
Protects iPhone cable
... cable
cults
protected cable
you're fed up that your break wire too easily put just that cable protector to solve the problem
Mk8
cults
free
![Extruder with MK8 drive gear and 688 bearing for dagoma discovery200](/t/2983493.jpg)
Extruder with MK8 drive gear and 688 bearing for dagoma discovery200
...with mk8 drive gear and 688 bearing for dagoma discovery200
extruder with mk8 drive gear and 688 bearing for dagoma discovery200
cults
free
![Dual E3D V6 MK8 part fan mount](/t/2977983.jpg)
Dual E3D V6 MK8 part fan mount
...r block
larger flat bottom area for easier printing, slightly larger air volume
fixed small alignment issue on fan mounting holes
cults
free
![M10 to M6 Pushfit Adapter 1.75mm MK7 Bowden](/t/2991395.jpg)
M10 to M6 Pushfit Adapter 1.75mm MK7 Bowden
...and screwed on a m6 thread of the mk7 (mk8) extruder. i don't know, if it will be strong...
cults
free
![Wanhao Duplicator 4X - Top cover plate for MK9 extruder](/t/2987709.jpg)
Wanhao Duplicator 4X - Top cover plate for MK9 extruder
...for mk9 extruder cults this week, i upgraded the mk8 extruder in my wanhao duplicator 4x to the mk9...
cults
free
![Modular mount, 5015 turbo fan Prusa](/t/2992111.jpg)
Modular mount, 5015 turbo fan Prusa
...ventilateur type 5015 à ma prusa i3 (ctc), extrudeur mk8 permet d'ajuster dans tous les axes la ventilation pour...
cults
free
![Mammut - Giant printer.](/t/2993991.jpg)
Mammut - Giant printer.
...300 mm/s. a ~11 mm extruder gear is needed: https://www.banggood.com/2pcs-mk7-mk8extruder-driver-feeder-gear-wheel-40teeth-11mm-bore-5mm-for-3d-printer-p-1036149.html?p=hd240528697332015103&cur_warehouse=cn x uses a microswitch for homing. y and z...
Predator
cults
free
![Predator pendant](/t/2990349.jpg)
Predator pendant
...predator pendant
cults
predator
predator mask collar
cults
free
![PREDATOR 3D DRAWING](/t/2979458.jpg)
PREDATOR 3D DRAWING
...redator 3d drawing
cults
3dlito black predator drawing3d lithophane litofania monster relief two_colors white
3d drawing predator
cults
$57
![General Atomics MQ-1 Predator.](/t/2992903.jpg)
General Atomics MQ-1 Predator.
...-1 predator.
cults
drone
https://www.youtube.com/watch?v=yfitkszmgee
project with general atomics mq-1 predator to 3d printing.
cults
$1
![IPhone 6s 7s 8 Predator Case](/t/2990291.jpg)
IPhone 6s 7s 8 Predator Case
...iphone 6s 7s 8 predator case
cults
sheath iphone 6s
flexible case iphone 6s 7s 8 predator
cults
free
![M3 Predator Mass Effect](/t/2991620.jpg)
M3 Predator Mass Effect
...m3 predator mass effect
cults
gun m3_predator mass_effect video_game
ad on for the m3
cults
free
![3D drawing in vertical PREDATOR (base)](/t/2975228.jpg)
3D drawing in vertical PREDATOR (base)
...
g-code for zmorph
stl of the base to use of pen
small tutorial and tests:
https://www.youtube.com/watch?v=rttjp4qmcly
cults
$11
![Predator Shoulder Cannon](/t/2983272.jpg)
Predator Shoulder Cannon
... makerslab.
makerslab the 3d printing space.
where we sell 3d printers.
3d modeled on the contract.
http://www.makerslab.cz/en/
cults
free
![Predator Mask with Battle Damage](/t/2983126.jpg)
Predator Mask with Battle Damage
...ships and that sort of thing for years and his original mask helped me greatly get the sizing right for the eye sockets and such.
cults
free
![Predator Bust With Hair (35mb)](/t/2984774.jpg)
Predator Bust With Hair (35mb)
... - as you can see my very first test run was good enough to print and paint.
total time print/paint 6 hours (4.5print/1.5 paint)
cults
free
![Predator Bust Sculpt (HD)](/t/2983109.jpg)
Predator Bust Sculpt (HD)
...im not worried about the back of it, i suggest you try it for less support. i put it upright just for home position on the plate.
Mod
cults
free
![light cage mods](/t/2978596.jpg)
light cage mods
...light cage mods
cults
light cage mods
light cage mods
cults
free
![3A batteries mod for SMARS](/t/2976217.jpg)
3A batteries mod for SMARS
...gned to fit this motor driver: https://goo.gl/v8adzu
you will need some prong fastener (like these ones https://goo.gl/kckwi9)
cults
free
![Mobius Camera - MoPro Mod](/t/2983544.jpg)
Mobius Camera - MoPro Mod
...//www.ebay.com/itm/mobius-actioncam-1080p-2-5-cm-26-pin-lens-extension-cable-/291415457724?hash=item43d9b6ffbc:g:l4oaaosw7abveklx
cults
$5
![Cannon Oto Melara Mod 56 105 mm](/t/2990333.jpg)
Cannon Oto Melara Mod 56 105 mm
...cannon oto melara mod 56 105 mm
cults
oto melara mod 56 105 mm files in stl
only for 3d printer
cannon and ammunition
cults
$12
![Handguard for 98L Tippmann CRONUS MOD](/t/2984256.jpg)
Handguard for 98L Tippmann CRONUS MOD
...r most tippmann a5 type barrels. it fits my tippmann cronus conversion kit. both the body and the handguard feature keymod rails.
cults
free
![SMARS Three wheeled mod](/t/2985413.jpg)
SMARS Three wheeled mod
...tronics of the original smars (except the n20 motors)
join us on facebook for updates and software help: https://goo.gl/qla9ag
cults
free
![OpenRC Tractor motor mod](/t/2977990.jpg)
OpenRC Tractor motor mod
... updates and get more details at (http://www.makitpro.com)
download original tractor from: https://cults3d.com/en/users/makitpro
cults
free
![SMARS QUAD MOD](/t/2984509.jpg)
SMARS QUAD MOD
...ell
-1x frame_e
-1x servo driver cover
-1x holding board spark
-2x foot
-2x foot_m
-4x servo case
-4x servo case_m
-4x servo arm
cults
free
![Snap Together Farm Tractor - minor mods](/t/2981882.jpg)
Snap Together Farm Tractor - minor mods
... support material in the cabin)
remixed from:
https://www.thingiverse.com/thing:962058
https://www.thingiverse.com/thing:2037712
cults
free
![Anet A6 J-Hotend mod](/t/2991795.jpg)
Anet A6 J-Hotend mod
...e hotend wil come to sit. you can break this cylinder out after the print is ready, this cylinder is for support while printing.
Cooling
cults
$1
![Cooling Anet](/t/2990390.jpg)
Cooling Anet
...tion radiator fan
personal realization of the cooling diffuser for anet.
customized realization of different other products ...
cults
$5
![Cool bee](/t/2991623.jpg)
Cool bee
...cool bee
cults
insect bee toy
some cool bee :)
cults
$2
![support smile cool](/t/2983698.jpg)
support smile cool
...support smile cool
cults
support smile cool
support smile cool
cults
free
![SODASTREAM COOL Pressure Knob](/t/2983326.jpg)
SODASTREAM COOL Pressure Knob
...sodastream cool pressure knob
cults
sodastream cool push button
pressure button for sodastream cool reinforced.
cults
$2
![Cooling holder for nema 17](/t/2983931.jpg)
Cooling holder for nema 17
...cooling holder for nema 17
cults
fan cooling
fan size 40x40.
cults
free
![SODASTREAM COOL Pressure Knob](/t/2978293.jpg)
SODASTREAM COOL Pressure Knob
...sodastream cool pressure knob
cults
sodastream
pressure button for sodastream cool reinforced.
cults
free
![Flash Forge Cooling Fan Duct](/t/2987495.jpg)
Flash Forge Cooling Fan Duct
...flash forge cooling fan duct
cults
flash forge cooling fan duct
flash forge cooling fan duct
cults
$9
![Raise3D N2/Plus - Upgrade Cooling Fan Mount for controlled cooling](/t/2979086.jpg)
Raise3D N2/Plus - Upgrade Cooling Fan Mount for controlled cooling
...0, but attention: it could touch/hit the frame when it come into the home position. i have adjusted the end-switch to avoid this)
cults
$7
![Mitsubishi cooling cap](/t/2985801.jpg)
Mitsubishi cooling cap
...mitsubishi cooling cap
cults
top refrigerant mitsubishi car
mitsubishi coolant cap with thread
cults
free
![Cooling system Prusa i3 rework](/t/2991719.jpg)
Cooling system Prusa i3 rework
...m prusa i3 rework
cults
prusa i3 rework fan duck cooling
the system is directly attached to the extruder with the original holes.