module shells for M5Stack by n602

Last crawled date: 4 years, 2 months ago

module shells for M5Stack
M5Stack ; http://m5stack.com/
The source of information on hardware is the following site.https://github.com/m5stack/M5-hardware
For the dimensional information necessary for this thing, refer to the instructions enclosed with the m5stack product.
-CAD DATA.
stack047.stp ; step format
stack047.123dx ; Autodesk123D file
-STL file.
stack047_prt0.stl ; PROTO module shell
stack047_prtbt1.stl ; PROTO-Bottom module shell (H 6.6mm).
stack047_prtbt2.stl ; PROTO-Bottom module shell (H 13.2mm).
stack047_prtbt3.stl ; PROTO-Bottom module shell (H 13.2mm).
stack047_btm.stl ; BOTTOM module shell, without magnets.
stack047_btm2.stl ; BOTTOM module shell, Battery-UpGradable, without magnets.
-It seems that "503048"(850mAh) is built in the "Battery function module", M5Stack products.
-Deviations from proper usage of LiPo batteries are a big risk for you.
-Please select LiPo battery by judgment based on correct knowledge.
*** update 5/20/2018
AMP&SPK module [experimental]
-CAD DATA.
stack047_spk-vol_03.stp ; step format
stack047spk-vol.123dx ; Autodesk123D file
-STL file.
stack047_spk-vol_03.stl ; module shell
This is an experimental attempt to add volume adjustment function to M5 Stack.
This is a SPK& module in order to avoid adding as much as possible inside M5 Stack Core.
Please refer to the schematic of M5 Stack core and find and confirm how to disable AMP.(NS4150) inside M5 Stack core.
The parts, circuits, and circuit constants shown in the photo may not necessarily be the ideal correctness.
Even if M5 Stack and peripheral devices are damaged by this thing, I can not take responsibility for it.
If you try this, please check the selection of parts and circuits at your own risk.