Thingiverse
Modular Toys. Automata by blockycodes
by Thingiverse
Last crawled date: 4 years, 2 months ago
Full instructions here, for step by step how to use it, please go here.
https://www.instructables.com/The-Most-Advanced-Open-Source-3D-Print-Modular-Blo/
To have the best experience using this system. make sure you have a calibrated 3D printer. Try to print the smallest block first. which is the 3x1 block, Measure the result using a caliper.
The holes on the block need to be 7mm. and the thickness is 4mm.
The tolerance is 0.1mm, if the result is +- more than 0.2mm then you need to calibrate your 3D printer first.
For the pins, I recommend using raft.
I use 0.2 layer height, speed 60mms,
https://www.instructables.com/The-Most-Advanced-Open-Source-3D-Print-Modular-Blo/
To have the best experience using this system. make sure you have a calibrated 3D printer. Try to print the smallest block first. which is the 3x1 block, Measure the result using a caliper.
The holes on the block need to be 7mm. and the thickness is 4mm.
The tolerance is 0.1mm, if the result is +- more than 0.2mm then you need to calibrate your 3D printer first.
For the pins, I recommend using raft.
I use 0.2 layer height, speed 60mms,