Thingiverse
Modular Style IKEA Lack Enclosure by VertexMachine3D
by Thingiverse
Last crawled date: 3 years ago
Hello Makers,
This is a modular type IKEA Lack enclosure for Prusa style Cartesian printers!
You can choose to use as many Lack tables as you would like for this project. Though I cannot guarantee it will work with less than 2, or how sturdy it will be with more than 4.
The middle part of the extension can be printed multiple times to extend the height of your enclosure later down the road. This will require you fill the void with some type of material (more plexi, wood, cardboard, etc.) but will allow for Zaribo and MMU style upgrades to your printer without having to completely rebuild your enclosure!
Some goals I had when I started the design.
Modular type design for easy customization of amount of tables used in the build and ability to increase height after enclosure is finished. Allowing for upgrades (Zaribo, MMU, etc.) after building the enclosure
Detachable doors for easy access. I wanted the front to be split and for removal and installation to be as easy as possible.
A good seal around windows and doors for noise, ventilation, and insulation purposes
Electronics moved to outside. (This is probably not necessary, just something I wanted for accessibility purposes and to make the printer look more streamlined)
Easy to maneuver, preferably with wheels that also have brakes so it can be locked in place.
The magnets I used are 2x9mm N50 grade (link below) but if anyone wants me to edit the files for 3x8mm magnets I can easily do so.
(Link to Scrubber - https://www.thingiverse.com/thing:3070659)
Finally have gotten around to revising the files on my enclosure build and everything has been modified to print with VERY MINIMAL SUPPORTS!
YOU WILL NEED TO EXTEND A FEW DUPONT CONNECTIONS IF MOVING THE RAMBO UNDERNEATH THE ENCLOSURE. I simply glued some dupont jumpers together to achieve this (link further down) but you can buy some legitimate extensions from Zaribo.org as well.
I opted for Plexiglass because I had a place in town that could cut it to size for me, but Lexxan may be a better alternative if you plan on cutting it yourself. It is less brittle than Plexi but more prone to scratches and is much more UV sensitive. (turns yellow when exposed to UV) I went with 3mm thickness.
Measurements for the windows is 680mm x 430mm (x2)
Measurement for the split door is 215mm x 680mm (x2)
I placed my hinges about 1.5" from the top and bottom of the glass. If set right, once you put the edge trim around the glass, it should be friction fit even without magnets.
EDIT Extended the stand-offs on the door catch rails by 2mm to prevent having to double up on magnets, tried to tidy up the file names abit.
-Materials and components list-
(Can source from anywhere, providing links to exact items I used)
Shop Fox D4543 Non-Marring Swivel Caster with Brake, 3-Inch https://www.amazon.ca/dp/B010D8NZ64?ref=yo_pop_ma_swf
5M Window Door Excluding Draft Strip Self Adhesive Anti-Collision Sticky Seal.https://www.wish.com/c/58390f71764f4855fbcae095
32Ft (10M) Edge Door Trim Seal Protector https://www.amazon.ca/dp/B076T4L55T/ref=cm_sw_r_cp_apa_wRboBbKDBN1K9
Reliable Hardware Company RH-1225BK-2-A Black Take-Apart/Lift Off Hinge - Set of 2 https://www.amazon.ca/dp/B00JJ18XIM/ref=cm_sw_r_cp_apa_ITboBbZRPAVPP
Salesland 3 pin / 4 pin with LED 120 mm PWM PC computer case Cooling fan for CPU cooler Computer fan - blue https://www.amazon.ca/dp/B0778ZL4DL/ref=cm_sw_r_cp_apa_WZboBbT7EDN64
Install Bay PWHS81 8 X 1 Inches Phillips Wafer Head Stinger Coarse Screws, 500-Pack https://www.amazon.ca/dp/B001JT7BGW/ref=cm_sw_r_cp_apa_T0boBbXJSHK74
Haitronic 120pcs 20cm length Jumper Wires/dupont cable Multicolored https://www.amazon.ca/dp/B01LZF1ZSZ?ref=yo_pop_ma_swf
Waterproof AC 110V/220V DC 12V 10A 120W Powersupply for LED Striphttps://www.wish.com/c/588700e6c444fa655e05de63
AC Power cord Y Splitter cablehttps://www.amazon.ca/gp/product/B0788VGS77/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
10A 250V AC Power Socket Rocker Switch 3 Pinhttps://www.amazon.ca/gp/product/B0795S569L/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
5M 3528 SMD 300LED Flexible Light Strips Warm Cool White LED Lamp DC 12Vhttps://www.wish.com/c/595de6b8fd2e9971e666c808
9mm x 2mm N50 Grade Disc Magnetshttps://www.umagnets.com/p/disc-magnet-n50-9mm-x-2mm-nickel-plated/
(Optional)
5M 5050 UV Ultraviolet LED Dark Blue Light Waterproof https://www.wish.com/c/574f8c918e6f9960a68038e9
Split Braided Expandable PET Flexible Wire Cover Blackhttps://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F123068076106
(I ordered 5m lengths of blue techflex to match my theme, seems to be unavailable now but this should make for MUCH easier install anyhow.)
Material Detection Sensor Module + Cable New for 3D Printer 1.75mm Filamenthttps://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F192424966431
(I bought 4 but now that the new MMU is coming I'll have to order a fifth)
CanaKit Raspberry Pi 3 B+ (B Plus) with 2.5A Power Supply (UL Listed) https://www.amazon.ca/dp/B07BD3WHCK/ref=cm_sw_r_cp_apa_I3coBbGRXNPEA
LANDZO 4 Channel Relay Module Controller Board with Optocoupler for Raspberry pi and Arduino https://www.amazon.ca/dp/B01N4O719N?ref=yo_pop_ma_swf
LANDZO 3.5 Inch Touch Screen 320 480 for Raspberry Pi 2 Model B Raspberry Pi 3 with Touch Pen https://www.amazon.ca/dp/B01IGBDT02?ref=yo_pop_ma_swf
MAUSAN MQ-2 Gas Sensor MQ2 Smoke Sensor Methane Gas Detection For Arduino New 1pcs https://www.amazon.ca/dp/B071R1JC1Y/ref=cm_sw_r_cp_apap_bvMQy5VP9MCWt
Iztoss 12V Aluminum Metal Switch Power Logo Latching Push Button red Led 18mm https://www.amazon.ca/dp/B015GTWFUW/ref=cm_sw_r_cp_apa_64boBb00NNDNA
Ulincos® Latching Push Button Switch U19C1 1NO1NC SPDT ON/OFF Black Metal Shell with Blue LED Suitable for 19mm 3/4" Mounting Hole (Blue) https://www.amazon.ca/dp/B017KP67FY?ref=yo_pop_ma_swf
Ulincos 19mm Pigtail, Wire Connector, Socket Plug for U19C1 Push Button Switch (Pack of 2) https://www.amazon.ca/dp/B01H5BXC0G?ref=yo_pop_ma_swf
Adjustable DC-DC LM 2596 Converter Buck Step Down Regulator Power Module LW SZUShttps://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F181944416012
Please feel free to message me with design improvements or suggestions, my enclosure was built using all V1 parts so the pictures may look different than the files. I improved various parts after my build, mainly the LED Rails/Door Catch has a slotted screw hole so adjustments can be made easily while installing the windows and doors.
This is a modular type IKEA Lack enclosure for Prusa style Cartesian printers!
You can choose to use as many Lack tables as you would like for this project. Though I cannot guarantee it will work with less than 2, or how sturdy it will be with more than 4.
The middle part of the extension can be printed multiple times to extend the height of your enclosure later down the road. This will require you fill the void with some type of material (more plexi, wood, cardboard, etc.) but will allow for Zaribo and MMU style upgrades to your printer without having to completely rebuild your enclosure!
Some goals I had when I started the design.
Modular type design for easy customization of amount of tables used in the build and ability to increase height after enclosure is finished. Allowing for upgrades (Zaribo, MMU, etc.) after building the enclosure
Detachable doors for easy access. I wanted the front to be split and for removal and installation to be as easy as possible.
A good seal around windows and doors for noise, ventilation, and insulation purposes
Electronics moved to outside. (This is probably not necessary, just something I wanted for accessibility purposes and to make the printer look more streamlined)
Easy to maneuver, preferably with wheels that also have brakes so it can be locked in place.
The magnets I used are 2x9mm N50 grade (link below) but if anyone wants me to edit the files for 3x8mm magnets I can easily do so.
(Link to Scrubber - https://www.thingiverse.com/thing:3070659)
Finally have gotten around to revising the files on my enclosure build and everything has been modified to print with VERY MINIMAL SUPPORTS!
YOU WILL NEED TO EXTEND A FEW DUPONT CONNECTIONS IF MOVING THE RAMBO UNDERNEATH THE ENCLOSURE. I simply glued some dupont jumpers together to achieve this (link further down) but you can buy some legitimate extensions from Zaribo.org as well.
I opted for Plexiglass because I had a place in town that could cut it to size for me, but Lexxan may be a better alternative if you plan on cutting it yourself. It is less brittle than Plexi but more prone to scratches and is much more UV sensitive. (turns yellow when exposed to UV) I went with 3mm thickness.
Measurements for the windows is 680mm x 430mm (x2)
Measurement for the split door is 215mm x 680mm (x2)
I placed my hinges about 1.5" from the top and bottom of the glass. If set right, once you put the edge trim around the glass, it should be friction fit even without magnets.
EDIT Extended the stand-offs on the door catch rails by 2mm to prevent having to double up on magnets, tried to tidy up the file names abit.
-Materials and components list-
(Can source from anywhere, providing links to exact items I used)
Shop Fox D4543 Non-Marring Swivel Caster with Brake, 3-Inch https://www.amazon.ca/dp/B010D8NZ64?ref=yo_pop_ma_swf
5M Window Door Excluding Draft Strip Self Adhesive Anti-Collision Sticky Seal.https://www.wish.com/c/58390f71764f4855fbcae095
32Ft (10M) Edge Door Trim Seal Protector https://www.amazon.ca/dp/B076T4L55T/ref=cm_sw_r_cp_apa_wRboBbKDBN1K9
Reliable Hardware Company RH-1225BK-2-A Black Take-Apart/Lift Off Hinge - Set of 2 https://www.amazon.ca/dp/B00JJ18XIM/ref=cm_sw_r_cp_apa_ITboBbZRPAVPP
Salesland 3 pin / 4 pin with LED 120 mm PWM PC computer case Cooling fan for CPU cooler Computer fan - blue https://www.amazon.ca/dp/B0778ZL4DL/ref=cm_sw_r_cp_apa_WZboBbT7EDN64
Install Bay PWHS81 8 X 1 Inches Phillips Wafer Head Stinger Coarse Screws, 500-Pack https://www.amazon.ca/dp/B001JT7BGW/ref=cm_sw_r_cp_apa_T0boBbXJSHK74
Haitronic 120pcs 20cm length Jumper Wires/dupont cable Multicolored https://www.amazon.ca/dp/B01LZF1ZSZ?ref=yo_pop_ma_swf
Waterproof AC 110V/220V DC 12V 10A 120W Powersupply for LED Striphttps://www.wish.com/c/588700e6c444fa655e05de63
AC Power cord Y Splitter cablehttps://www.amazon.ca/gp/product/B0788VGS77/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
10A 250V AC Power Socket Rocker Switch 3 Pinhttps://www.amazon.ca/gp/product/B0795S569L/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
5M 3528 SMD 300LED Flexible Light Strips Warm Cool White LED Lamp DC 12Vhttps://www.wish.com/c/595de6b8fd2e9971e666c808
9mm x 2mm N50 Grade Disc Magnetshttps://www.umagnets.com/p/disc-magnet-n50-9mm-x-2mm-nickel-plated/
(Optional)
5M 5050 UV Ultraviolet LED Dark Blue Light Waterproof https://www.wish.com/c/574f8c918e6f9960a68038e9
Split Braided Expandable PET Flexible Wire Cover Blackhttps://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F123068076106
(I ordered 5m lengths of blue techflex to match my theme, seems to be unavailable now but this should make for MUCH easier install anyhow.)
Material Detection Sensor Module + Cable New for 3D Printer 1.75mm Filamenthttps://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F192424966431
(I bought 4 but now that the new MMU is coming I'll have to order a fifth)
CanaKit Raspberry Pi 3 B+ (B Plus) with 2.5A Power Supply (UL Listed) https://www.amazon.ca/dp/B07BD3WHCK/ref=cm_sw_r_cp_apa_I3coBbGRXNPEA
LANDZO 4 Channel Relay Module Controller Board with Optocoupler for Raspberry pi and Arduino https://www.amazon.ca/dp/B01N4O719N?ref=yo_pop_ma_swf
LANDZO 3.5 Inch Touch Screen 320 480 for Raspberry Pi 2 Model B Raspberry Pi 3 with Touch Pen https://www.amazon.ca/dp/B01IGBDT02?ref=yo_pop_ma_swf
MAUSAN MQ-2 Gas Sensor MQ2 Smoke Sensor Methane Gas Detection For Arduino New 1pcs https://www.amazon.ca/dp/B071R1JC1Y/ref=cm_sw_r_cp_apap_bvMQy5VP9MCWt
Iztoss 12V Aluminum Metal Switch Power Logo Latching Push Button red Led 18mm https://www.amazon.ca/dp/B015GTWFUW/ref=cm_sw_r_cp_apa_64boBb00NNDNA
Ulincos® Latching Push Button Switch U19C1 1NO1NC SPDT ON/OFF Black Metal Shell with Blue LED Suitable for 19mm 3/4" Mounting Hole (Blue) https://www.amazon.ca/dp/B017KP67FY?ref=yo_pop_ma_swf
Ulincos 19mm Pigtail, Wire Connector, Socket Plug for U19C1 Push Button Switch (Pack of 2) https://www.amazon.ca/dp/B01H5BXC0G?ref=yo_pop_ma_swf
Adjustable DC-DC LM 2596 Converter Buck Step Down Regulator Power Module LW SZUShttps://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F181944416012
Please feel free to message me with design improvements or suggestions, my enclosure was built using all V1 parts so the pictures may look different than the files. I improved various parts after my build, mainly the LED Rails/Door Catch has a slotted screw hole so adjustments can be made easily while installing the windows and doors.
Similar models
thingiverse
free
2 - 2.5 inch stretched X drone frame by RichMaxx
.../b0773ntqj2/ref=cm_sw_r_cp_apa_kwsoabvjd4np5
25mw aio camerahttps://www.amazon.com/dp/b073j61ssq/ref=cm_sw_r_cp_apa_zasoab1yj0k11
thingiverse
free
Brushless Micro Ducted Quadcopter Frame for 1103 Motors by mailmanfever
...www.ebay.com%2fulk%2fitm%2f262747275892
38mm propshttps://banggood.app.link/qnvzuuiwbh
then just a micro dsmx satellite reciever.
thingiverse
free
floating extruder assembly by Laguz75
...0mm x2
4mm square nut
ss drive gear https://rover.ebay.com/rover/0/0/0?mpre=https%3a%2f%2fwww.ebay.com%2fulk%2fitm%2f201858310740
thingiverse
free
Eryone Thinker / S - LED Light Mount
...ttps://rover.ebay.com/rover/0/0/0?mpre=https%3a%2f%2fwww.ebay.co.uk%2fulk%2fitm%2f162134810313
is the lamp i'm using, usb led
thingiverse
free
Filament Spulen holder Anicubic I3 Mega by AresMars
...n
1x kabel https://rover.ebay.com/rover/0/0/0?mpre=https%3a%2f%2fwww.ebay.de%2fulk%2fitm%2f123309045945
nur für anycubic i3 mega
thingiverse
free
Alexa TV Lamp esp8266 infrared Arduino by atc1441
...5-100pcs-uln2003-uln-2003-uln2003an-uln2003apg-dip-16-ic-new%2f401409516658%3fhash%3ditem5d75df2472%3am%3amtnnvulzcegcec7agiukiea
thingiverse
free
DIY Arduino RC Car with Battery and Remote by atc1441
...ame-controller-dual-achse-ausbruch-modul-passend-fur-arduino-ky-023%2f201802907423%3fhash%3ditem2efc63ff1f%3ag%3a5meaaoswmtxxvyzt
thingiverse
free
Diode Mounts for Flashback Diode Packs by dhench
...ther-for-stepper-motor-compatible-with-drv8825-a4998-drivers%2f152813847024%3fhash%3ditem23946a41f0%3am%3ampfztgaeyk4d5gduz_meela
thingiverse
free
DIY 3D Printer RailMount Y-Achs
...%2fitm%2faluminium-hochfest-%25c3%2598-10-bis-100mm-aw-7075-vollstab-rundstange-alu-rund-stab%2f182458139751%3fvar%3d485035965859
thingiverse
free
Mosfet Mount with 50mm Fan by dhench
...-printer-heated-bed-power-module-i3-heatbed%2f152890867085%3fsspagename%3dstrk%253amebidx%253ait%26_trksid%3dp2057872.m2749.l2649
Vertexmachine3D
thingiverse
free
Overhang Calibration Test by VertexMachine3D
...ertexmachine3d
thingiverse
this is a nice little overhang test i designed in fusion360 for calibrating overhangs on my ender 3.
thingiverse
free
Eyeball Extruder Visualizer by VertexMachine3D
...r printing! if you don't have mmu than just load a single part and click on the object to add the rest of the parts. enjoy :)
thingiverse
free
Blob of Frustration by VertexMachine3D
... print with caution!
the blob is a cruel mistress and i cannot be held accountable for any damage it may cause upon your printer.
thingiverse
free
Spool Holder Shim for Creality Ender 3/Pro/V2 by VertexMachine3D
... had some slop in it. the hardware was bottoming out on the extrusion, so i designed a small shim to prevent this from happening.
thingiverse
free
LM 2596 Mountable Housing by VertexMachine3D
...ng this under my enclosure and using the module to step 12v down to 5v to power my rpi.
attaches with four m3*16 cap head screws
thingiverse
free
LM 2596 V-Slot Mounted Enclosure by VertexMachine3D
...es i designed this enclosure for)https://www.amazon.ca/gp/product/b07vvxf7yx/ref=ppx_yo_dt_b_asin_title_o07_s00?ie=utf8&psc=1
thingiverse
free
LM 2596 V-Slot Mounted Enclosure by VertexMachine3D
... and designed this enclosure for)https://www.amazon.ca/gp/product/b07vvxf7yx/ref=ppx_yo_dt_b_asin_image_o07_s00?ie=utf8&psc=1
thingiverse
free
Octoprint 12v PSU Cover and Enclosure mount by VertexMachine3D
... raspberry pi (loaded with octoprint) via a step down buck converter. it will also power the 12v computer fans and 12v uv lights.
thingiverse
free
The Legendary STL? by VertexMachine3D
...e chosen few to continue to guard this secret. or will you give those who ask what they have been so desperately searching for...
thingiverse
free
V-slot Handle (5mm Hardware) by VertexMachine3D
...nse...
there are 2 files, one that runs flush to the aluminum profile and another that is tapered 3 degrees on the sides.
enjoy!
Lack
3d_export
$5
LACK LACK Coffee table white 90x55 cm IKEA
..., white, 90x55 cm ikea<br>https://www.ikea.com/ru/ru/p/lack-lakk-zhurnalnyy-stol-belyy-50449907/?ysclid=l8zshj49w6656165430
turbosquid
$4
Ikea Lack
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
$1
IKEA Lack Coffee Table
... кофейный
ikea lack coffee tablehttp://www.ikea.com/gb/en/catalog/products/00104291
turbosquid
$5
IKEA Lack Table
...ack table for download as blend, blend, unitypackage, and fbx on turbosquid: 3d models for games, architecture, videos. (1623135)
turbosquid
$10
Ikea Lack Set
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$3
IKEA Lack Library
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$1
IKEA LACK TABLE
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
IKEA Lack Shelf
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$9
Ikea Table 5 Lack
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$5
IKEA Lack Side Table
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
Enclosure
3d_export
free
electrical enclosure
...l enclosure where electrical devices like (relays, contactors, busbars ) are kept in order to protect from hazardous environment.
turbosquid
$100
GPU Enclosure
...yalty free 3d model gpu enclosure for download as obj and stl on turbosquid: 3d models for games, architecture, videos. (1381061)
3d_export
$5
Electrical Enclosure
...ed. also has tower lights attaced on the top.<br>file format that are available:<br>.step<br>.obj<br>.stl
archive3d
free
Enclosure 3D Model
...closure 3d model
archive3d
shower enclosure-acquarius- 3d model for interior 3d visualization.
archive3d
free
Enclosure 3D Model
...enclosure 3d model
archive3d
shower enclosure-omega- 3d model for interior 3d visualization.
archive3d
free
Enclosure 3D Model
...enclosure 3d model
archive3d
shower enclosure-vega - 3d model for interior 3d visualization.
archive3d
free
Enclosure 3D Model
...enclosure 3d model
archive3d
shower enclosure-zenith - 3d model for interior 3d visualization.
turbosquid
$20
shower enclosure
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$14
Dumpster Enclosure
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$25
3d printer enclosure
... model 3d printer enclosure for download as ipt, skp, and fbx on turbosquid: 3d models for games, architecture, videos. (1634310)
Modular
3ddd
$1
MODULAR
...modular
3ddd
modular , врезной свет
modular потолочные светильники
3ddd
$1
Modular Spock
...modular spock
3ddd
modular
modular spock
3ddd
$1
MODULAR / Spock
...modular / spock
3ddd
modular
modular/spock
design_connected
$7
Modular
...modular
designconnected
emmemobili modular shelves and storage computer generated 3d model. designed by ferruccio laviani.
3ddd
$1
Modular spock
...modular spock
3ddd
modular
spock wall led
turbosquid
$25
Modular sofa Angelo Cappellini Modular
...a angelo cappellini modular for download as max, fbx, and obj on turbosquid: 3d models for games, architecture, videos. (1570923)
turbosquid
$15
Modular sofa Angelo Cappellini Modular
...a angelo cappellini modular for download as max, fbx, and obj on turbosquid: 3d models for games, architecture, videos. (1570304)
3ddd
$1
Modular 2FLAT2C
...modular 2flat2c
3ddd
modular
modularhttp://www.supermodular.com/
3d_export
free
Modular walls
...modular walls
3dexport
modular walls for playing without materials and textures
3ddd
$1
Modular / Lighting Juliette
...modular / lighting juliette
3ddd
modular
modular lighting juliette
Ikea
3ddd
$1
IKEA
...ikea
3ddd
ikea , стеллаж
ikea
3ddd
$1
IKEA
...ikea
3ddd
ikea
кухня ikea
3ddd
$1
IKEA
...ikea
3ddd
ikea
осторожно, тяжелая модель
ikea
3ddd
$1
IKEA
...ikea
3ddd
ikea
5 зеркал от ikea
3ddd
$1
IKEA
...ikea
3ddd
ikea , бойа
ikea светильник потолочный
3ddd
$1
IKEA
...ikea
3ddd
ikea , барный
bar stool ikea
3ddd
$1
IKEA
...ikea
3ddd
ikea , зубная щетка , косметика
ikea
3ddd
free
IKEA
...ikea
3ddd
ikea , трюмо
дамский столик ikea.
3ddd
$1
IKEA
...3ddd
ps , декоративный набор , ikea
ikea decor
3ddd
$1
Ikea
...ikea
3ddd
ikea , lagra
модель лампы от ikea
Style
3ddd
$1
style
...style
3ddd
манекен , одежда
style
3ddd
$1
BM Style
...bm style
3ddd
bm style
кресло bm style с материалами и тестурами
3d_export
$5
style handle
...style handle
3dexport
style handle
3d_export
$6
new style
...new style
3dexport
new style room
turbosquid
$1
style
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$5
Roman style
...roman style
3dexport
roman style architecture house
3ddd
$1
Ceppi Style
...ceppi style
3ddd
ceppi style
качественная модель классического стола ceppi style с текстурами и материалами v-ray
3ddd
$1
Kolo Style
...kolo style
3ddd
kolo
умывальник kolo style, арт. l21950
3ddd
$1
Banos Style
... style
производитель banos
модель style
в архиве присутствует дополнительная версия с материалами для corona
3ddd
$1
Кухня Free-style
...кухня free-style
3ddd
free-style
кухня free-style