Thingiverse
Modular Fortress by nailernforce
by Thingiverse
Last crawled date: 4 years, 7 months ago
Printable modules for an ever expanding fortress. Each piece will fit into another in many different ways, which makes it possible to build a wide variety of fortress configurations.
I printed mine on an Anycubic Mono X.
If you can fit it on your build plate, try to get 2 wall pieces and 1 catwalk piece done in one print.
I printed all the pieces at -60 degrees rotation, that is 30 degrees from laying face up.
I also used heavy supports, but you might have luck using medium. Do so at your own peril.
Be advised that these walls are quite heavy and a full print will cost you about 125ml of resin.
I used PrimaCreator Water UV black for mine.
I printed mine on an Anycubic Mono X.
If you can fit it on your build plate, try to get 2 wall pieces and 1 catwalk piece done in one print.
I printed all the pieces at -60 degrees rotation, that is 30 degrees from laying face up.
I also used heavy supports, but you might have luck using medium. Do so at your own peril.
Be advised that these walls are quite heavy and a full print will cost you about 125ml of resin.
I used PrimaCreator Water UV black for mine.