Thingiverse
Modified for ESP32-CAM by shitiuse
by Thingiverse
Last crawled date: 4 years ago
Modified this Mech to take my ESP32-Cam was worried about the heat but so far no failure.
The original poster of this model was given the blues for it. If you can't figure out what to do with it don't make it. the camera needs to be hot glued to the shell. i used metal geared micro servos. Holes will need to be drilled out to accept your screw type. servo horns may need to be trimmed. I used support for all stl's. after two weeks cam failed added vents and a fan.
The original poster of this model was given the blues for it. If you can't figure out what to do with it don't make it. the camera needs to be hot glued to the shell. i used metal geared micro servos. Holes will need to be drilled out to accept your screw type. servo horns may need to be trimmed. I used support for all stl's. after two weeks cam failed added vents and a fan.