Thingiverse
Modern Jukebox by thisoldgeek
by Thingiverse
Last crawled date: 4 years, 8 months ago
This is a very ambitious project! Succesful printing took over 75 hours (and there were failures and repeats!).
This is a 3D printed mini jukebox based on a design by Marco Gregorio on grabcad.com.
The finished jukebox stands about 14.5 in./38 cm. high.
There are 21 different parts to print, some with two copies
Assembly was approximately 12 hours for electronics and parts.
Build instructions on hackster.io:https://www.hackster.io/thisoldgeek/modern-jukebox-bd1f4
This is a 3D printed mini jukebox based on a design by Marco Gregorio on grabcad.com.
The finished jukebox stands about 14.5 in./38 cm. high.
There are 21 different parts to print, some with two copies
Assembly was approximately 12 hours for electronics and parts.
Build instructions on hackster.io:https://www.hackster.io/thisoldgeek/modern-jukebox-bd1f4