Model rocket for Estes "D" size engines by PrintmasterSteve

Last crawled date: 4 years, 7 months ago

A simple single use rocket body for an Estes "D" size model rocket engine. I have been launching them without the use of a launch pad. The rocket was designed using RocketSim and should achieve an altitude of 5000 ft+ with a top speed exceeding 550 mph. These figures were worked out with an ambient air temperature of 80 degrees Fahrenheit with 40% humidity at sea level. You may need supports for the center of the rockets cone.
Rocket:
112.15mm tall x 58.31mm wide x 66.34mm thick
Fly this rocket at your own risk. I will not be held responsible for any property damage or personal injury. The end user assumes all risk and liability.