Thingiverse
Mobile Soldering Station Middle Part by Kellerwerkstatt
by Thingiverse
Last crawled date: 4 years, 10 months ago
A German video of the construction will be available at https://youtu.be/E01A7c-So8I on the 13th of November 2020
This part is meant to be used in conjunction with the Makita Battery Mount from bitsplusatoms
...the soldering holder from AGT: AGT Lötkolbenständer
...this XT60 to DC5525 power cable
...and the TS-100 soldering iron.
Almost forgot to list the switch... You will need that too. You could go without it and just pull the plug every time. But then again youwould have a big hole where the switch is suppoed to go. ;-)
It's meant to be sandwiched in between these parts to form a mobile soldering station.
I know this setup is pretty specific and not useful for everyone but some of you might find this helpful. Or so I hope.
Best Regards,
Daniel
This part is meant to be used in conjunction with the Makita Battery Mount from bitsplusatoms
...the soldering holder from AGT: AGT Lötkolbenständer
...this XT60 to DC5525 power cable
...and the TS-100 soldering iron.
Almost forgot to list the switch... You will need that too. You could go without it and just pull the plug every time. But then again youwould have a big hole where the switch is suppoed to go. ;-)
It's meant to be sandwiched in between these parts to form a mobile soldering station.
I know this setup is pretty specific and not useful for everyone but some of you might find this helpful. Or so I hope.
Best Regards,
Daniel