MKS TFT28 LCD Case and tilting bracket by dintid

Last crawled date: 3 years ago

Case with tilting bracket for my MKS TFT28 LCD display.
Needed a good case for my MKS TFT28 LCD display, after I created a case for my MKS TFT32 LCD display.
I really thought MKS28 and MKS32 were the same, but not at all.
The MKS TFT28 has much larger print/PCB, so model needed to be larger
No screen retention, so needed to build in retention in the Lid
More components closer to the edges, so needed to push out the sides.
Mounting holes very close to edges, so needed to push out the sides to make the piece strong enough and to make room for a M3 nut cutout.
Autodesk 3D view:http://a360.co/1PxCmrw
BOM:
4x 35mm m3 screw to assemble case, lcd and lid
and 4x M3 Nuts
4x M3 screws to attach the CaseBrackets Left and Right to the TFT28 Case
and 4x M3 nuts to attach CaseBracket to the TFT28 case
2x 20mm M3 screws to attaches MountingBracket to the CaseBrackets
2x M3 nuts to attach the MountingBracket to the CaseBrackets.
Some M3 screws to fix it to your printer.