Thingiverse
MK8 Mount Oneup Twoup Threeup Q3D by Dru3D
by Thingiverse
Last crawled date: 3 years ago
Designed this for my 175mm Q3D ThreeUp. I had another uploaded but that one didnt drop the MK8 far enough for the x carriage to come to the bed., This one recesses it down, You'll see/ This holds the mk8 extruder and has a thicker back wall 8.5mm thick to space the MK8 far out enough to clear my X-Axis endstop. This one had thick white endstops with red button switches. I still had to grind down the fan guard so it cleared a mounting screw on the endstop. And offsets will need to bet set.
x4 bolt holes are spaced 28mm apart square and recessed
Made for 45mm x 8mm diameter bearing spaced 55mm apart
Printed at 0.4 layer resolution
Perimeter 40mm/s
Solid Layers 30mm/s
Bridging 30mm/s
Infill 35mm/s
Travel 160mm/s
Used ABS by inland came out great. You need an m3 screw and nut.
The bracket my buddy gave me with the printer that is the plate that connects the X-Axis 45mm long 8mm diameter rod bearings, had 28mm spaces between all four hole mounts. No matter which version i found on Thingiverse the holes were way too close together. So if you have the bigger backplate or whatever upgrade my buddy did. I believe its 55mm from center rod to center rod on my back plate.
More from 3D Printer Extruders
x4 bolt holes are spaced 28mm apart square and recessed
Made for 45mm x 8mm diameter bearing spaced 55mm apart
Printed at 0.4 layer resolution
Perimeter 40mm/s
Solid Layers 30mm/s
Bridging 30mm/s
Infill 35mm/s
Travel 160mm/s
Used ABS by inland came out great. You need an m3 screw and nut.
The bracket my buddy gave me with the printer that is the plate that connects the X-Axis 45mm long 8mm diameter rod bearings, had 28mm spaces between all four hole mounts. No matter which version i found on Thingiverse the holes were way too close together. So if you have the bigger backplate or whatever upgrade my buddy did. I believe its 55mm from center rod to center rod on my back plate.
More from 3D Printer Extruders
Similar models
thingiverse
free
Sintron X-Axis Endstop Holder by patrick204
...04
thingiverse
simple x-axis endstop holder. clamps between both x-axis rods.
distance between rods = 45mm
diameter of rod = 8mm
thingiverse
free
X Endstop for 10mm microswitch by PrusaPal
...r 10mm microswitch by prusapal
thingiverse
x endstop for a microswitch with 10 mm mounting hole spacing. 8mm rod. m2.5 screws.
thingiverse
free
x endstop by Refflexes
...x endstop by refflexes
thingiverse
end stop clips on the x axis rods 8mm diameter with distance from center to center 45mm.
thingiverse
free
Prusa i3 Y-Axis Endstop Mount by kmackenzie
...prusa i3 y-axis endstop mount by kmackenzie
thingiverse
y-axis endstop mount designed to attach to 8mm rod spaced 20mm apart.
thingiverse
free
Blacksmith MK8 Extruder mount with blower duct nozzle by sergek
...se
yet another mk8 extruder mount i've built for my blacksmith diy printer.
linear bearing clip for x axis included as well.
thingiverse
free
Right Z Axis Holder ThreeUp by Chasem1701
...for my kit and relocated mounting holes to match the narrow right x axis carriage mount holes. included sketchup files if wanted.
thingiverse
free
Threeup Twoup Oneup Y-Axis Endstop by dp176406
...soldered pins sticking out on the underside of the endstop's pcb. modified the "trigger" to no longer need a screw.
thingiverse
free
X-Axis Endstop Bracket by badrock
...181468. i modified the height to lower the endstop to be closer to the rods and moved the clamps to fit the spacing requirement.
thingiverse
free
Geeetech Z axis bearing mount by woody_matt
...zed for the common 608 bearing (8mm id, 22mm od, 7mm thk). the model has 21mm centres between smooth rod hole and leadscrew axis.
thingiverse
free
Endstop arm for Geeetech i3 [Unified Prusa i3 Extruder for Mk8 drive gear] by fehlfarbe
...i3 extruder for mk8 drive gear] by fehlfarbe
thingiverse
the extruder didn't reach my x-axis endstop so i created this part.
Dru3D
thingiverse
free
Mini Drill Press Base for Matze-x2 version only by Dru3D
...3d
thingiverse
this is a printable base for matze-x2 's mini drill press found herehttps://www.thingiverse.com/thing:2814275
thingiverse
free
OneUp/TwoUp/ThreeUp Y-Axis Bearing holder Upgrade by Dru3D
...3 threads so its easy to tighten down the m3 nut. its hard keeping a tool on that small nut but once you tighten it, its awesome.
Threeup
thingiverse
free
Right Z Axis Holder ThreeUp by Chasem1701
...for my kit and relocated mounting holes to match the narrow right x axis carriage mount holes. included sketchup files if wanted.
thingiverse
free
QU-BD ThreeUp Second Z Axis Support by zcubed
...fill lower than 30%. it uses m3 30mm screws to attach to the right side panels and the normal m3 screws for the threaded rod nut.
thingiverse
free
Threeup Twoup Oneup Y-Axis Endstop by dp176406
...soldered pins sticking out on the underside of the endstop's pcb. modified the "trigger" to no longer need a screw.
thingiverse
free
V3 QU-BD ThreeUp Second Z Axis Support by zcubed
...the qubd two-up/three-up. this time specifically for the narrow x gantry replacement by tony_921. printed with 20% infill in abs.
thingiverse
free
MEGA & RAMPS 1.4 Bracket (ThreeUp TwoUp QU-BD OneUp) by dp176406
...onal holes for additions, other mounting, etc. just in case anyone else needs them (or in case i need them down the line).
enjoy!
thingiverse
free
V2 QU-BD ThreeUp Second Z Axis Support by zcubed
...lize it. printed at 20% infill with no issues.
just need 3x 30mm m3 screws to install it on to tony_921's gantry replacement.
thingiverse
free
OneUp / TwoUp / ThreeUp X-Axis Endstop Holder by dp176406
...d to ensure it stays in place. fortunately mine doesn't need additional support at this time, but it is there if you need it.
thingiverse
free
QU-BD ThreeUp Left & Right Bearing Holders for Z Rod Wobble by zcubed
...several 20mm m3 screws and one 10mm m3 for the left side bearing bracket. i printed both with 10% infill and no warping problems.
thingiverse
free
OneUp/TwoUp/ThreeUp Y-Axis Bearing holder Upgrade by Dru3D
...3 threads so its easy to tighten down the m3 nut. its hard keeping a tool on that small nut but once you tighten it, its awesome.
Q3D
thingiverse
free
q3d by marvel1901
...le passamonte, raffaele spina, pietro giuliano, arianna vergani
http://www.politronica.eu
qubit3d network
http://www.qubit3d.com/
thingiverse
free
Stand for Q3d QU-BD 3Up by Chasem1701
...ade a stand to raise the printer. it may work for a 1/2up, not certain. i have included the sketchup files if changes are needed.
thingiverse
free
Q3D 220 FPV Racing Frame by questpact
...perior material for racing but this is a fun build that can be put together very cheaply and will fly just as well. #growthehobby
thingiverse
free
Cracked Egg candel holder by MoayadH
...and to give it a unique look. printed with: q3d three up 0.4 mm nozzle, pla, 15% infill, 0.2mm...
thingiverse
free
gopro gimbal adapter for mobius shaped cameras by buhatkj
...hero size/shape camera. i use this with a quanum q3d gimbal and a tactic droneview...
thingiverse
free
TwoUp-grade by proto-plastik
...twoup-grade by proto-plastik thingiverse upgrade your q3d twoup the q3d twoup was a price leader in...
thingiverse
free
Oneup/Twoup Fan Bracket by modhappy
...is a simple press fit fan bracket for the q3d oneup / twoup 3d printer. i designed my own...
thingiverse
free
Voronoi teapot candle warmer by MoayadH
...to fit the teapot i have. my setting: printer: q3d three up nozzle: 0.3 mm layer hight: 0.2 mm...
thingiverse
free
Right Z Axis Holder ThreeUp by Chasem1701
...reach to fit second z axis as in the q3d qubd threeup kit. adjusted the reach to align the...
Oneup
thingiverse
free
OneUp Test Proto by soyonsici
...oneup test proto by soyonsici
thingiverse
prototype for oneup
thingiverse
free
cover for ONEUP EDC TOP CAP by energy85
...cover for oneup edc top cap by energy85
thingiverse
cover for oneup edc top cap
3x 22/18mm rubber oil seal
(o-ringe)
thingiverse
free
Modified MacAttak endstop adjusters for OneUp by JWag
...p by jwag
thingiverse
this is a modification of macattak's y-endstop adjuster and x/z bracket, tweaked to work on the oneup.
thingiverse
free
OneUp Bed Replacement by kmenigoz
...rts on my oneup at a 45 degree angle to make them fit on the print bed. these parts are currently being used on my oneup printer.
thingiverse
free
OneUp/TwoUp filament guide by bkohn1
... theorange's tube holder. i modified it to fit a qu-bd oneup or twoup top plate to help guide the filament into the extruder.
thingiverse
free
OneUp/TwoUp filament guide - customizable by pezinek
...thingiverse
simple filament guide inspired by http://www.thingiverse.com/thing:481980
originaly meant for qu-bd oneup printer.
thingiverse
free
OneUp USA rack remote trigger
...ing and closing your oneup rack. i sewed some straps to the slots and used shock cord to hang the handle from and keep it tight.
thingiverse
free
Modified for OneUp by zabazoom
...prox 5mm to the left. printed up and it gives an additional 5mm on the x. seems to maintain sufficient clamping on the 8mm rods.
thingiverse
free
Canondale Lefty CAP with hole for OneUp EDC by PostMelvin
...fty front forks with a hole for integrating the oneup edc tool system (https://www.oneupcomponents.com/products/edc-tool-system).
thingiverse
free
QUBD Twoup or Oneup Sturdy J-Head mount by bloodsrrw
...t by bloodsrrw
thingiverse
remix of qubd twoup or oneup sturdy e3d v6 hotend mount by ugn100 to support the j-head type hotends.
Twoup
thingiverse
free
TwoUp Filament Guide by ScubaScott
...ide by scubascott
thingiverse
simple filament guide that mounts to the stock twoup handle.
one of my first designs & prints.
thingiverse
free
TwoUp spool holder by WhyAndHow
...ool holder for the qu-bd twoup printer. it prints without support and then clips onto the top of the case that holds the y motor.
thingiverse
free
TwoUp X Carriage by rotmankl
...mm extruder mounting spacing
use a zip tie for belt tensioning.
used with this gantry http://www.thingiverse.com/thing:248059
thingiverse
free
OneUp/TwoUp filament guide by bkohn1
... theorange's tube holder. i modified it to fit a qu-bd oneup or twoup top plate to help guide the filament into the extruder.
thingiverse
free
QUBD Twoup X Gantry by Andrewselesky
...qubd twoup x gantry by andrewselesky
thingiverse
works better now
thingiverse
free
Parameterized TwoUp! (v2) Bed Nut Holder by TSA_COLORADO
...do
thingiverse
extra support for the m3 nuts used for mounting the heated bed on the twoup (v2).
feedback much desired ! :-)
thingiverse
free
QUBD twoUP bowden e3d lite6 hotend mount by dtrain9009
...ubd twoup bowden e3d lite6 hotend mount by dtrain9009
thingiverse
mount for qubd twoup. mounts e3d lite6 to a nema 17 footprint.
thingiverse
free
TwoUp-grade by proto-plastik
... peek hotend.
note
this is an upgrade kit. you will need to utilize your existing shafts, z-axis drive, motors, and electronics.
thingiverse
free
QU-BD TwoUp Gantry Type Crane Upgrade by Hogsqueal
...type crane upgrade by hogsqueal
thingiverse
see updated version qu-bd twoup upgrade in http://www.thingiverse.com/thing:1227902.
thingiverse
free
QUBD Twoup or Oneup Sturdy J-Head mount by bloodsrrw
...t by bloodsrrw
thingiverse
remix of qubd twoup or oneup sturdy e3d v6 hotend mount by ugn100 to support the j-head type hotends.
Mk8
3d_export
$99
Mitsubishi Lancer Ralliart sedan 2004 3D Model
...lancer ralliart sedan 2004 3d model 3dexport mitsubishi ralliart mk8 2004 2005 4-door sedan saloon japan japanese eighth generation...
3d_ocean
$89
Mitsubishi Lancer Ralliart sedan 2004
...2004-2005 4-door eighth generation japan japanese mitsubishi mitsubishi ralliart mk8 ralliart saloon sedan the 3d model was created on...
thingiverse
free
MK8 by IsaiRochaSegura
...chasegura
thingiverse
in this thing i share a replace bar for mk8 extruder. i include the solidworks files for any modification.
thingiverse
free
MK8 Duct by ombranova
...mk8 duct by ombranova
thingiverse
duct for extruder mount mk8 on prusa i3
thingiverse
free
MK8 Flex Guide by loganjkd
...mk8 flex guide by loganjkd
thingiverse
just an inset for the mk8
thingiverse
free
MK7 / MK8 Mold by JMDesigns
...mk7 / mk8 mold by jmdesigns
thingiverse
mk7 / mk8 mold
thingiverse
free
Support extruder MK8 by rickshaolin
...support extruder mk8 by rickshaolin
thingiverse
support extruder mk8
thingiverse
free
MK8 Fan bracket by rocktang2003
...mk8 fan bracket by rocktang2003
thingiverse
mk8 fan bracket
thingiverse
free
HyperCube Mk8 mount by machala737
...hypercube mk8 mount by machala737
thingiverse
remix hypercube mk8 mount
thingiverse
free
mk8 fan holder by everythingother
...mk8 fan holder by everythingother
thingiverse
this is mk8 amazing fan holder
Mount
3d_export
free
mounting bracket
...mounting plate is the portion of a hinge that attaches to the wood. mounting plates can be used indoors, cabinetry and furniture.
turbosquid
$2
MOUNTING
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
Mounts
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
Mount Fuji
...fuji
turbosquid
free 3d model mount fuji for download as obj on turbosquid: 3d models for games, architecture, videos. (1579977)
3d_export
$5
Headphone mount LR
...headphone mount lr
3dexport
headphone mount l+r
turbosquid
$39
Mount rainier
...quid
royalty free 3d model mount rainier for download as fbx on turbosquid: 3d models for games, architecture, videos. (1492586)
turbosquid
$5
pipe mounting
...quid
royalty free 3d model pipe mounting for download as obj on turbosquid: 3d models for games, architecture, videos. (1293744)
turbosquid
$3
Mounting Tires
...uid
royalty free 3d model mounting tires for download as fbx on turbosquid: 3d models for games, architecture, videos. (1708511)
3d_export
$5
Magnetic GoPro Mount
...pro mount
3dexport
cool magnetic mount for gopro. allows you to mount the camera on flat metal surfaces and get exclusive shots.
turbosquid
$5
Stone Mount
...ty free 3d model stone mount for download as ma, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1370306)