Thingiverse
MK3 Prusa Mosquito Hotend Mount by Superuser23
by Thingiverse
Last crawled date: 3 years, 4 months ago
Mosquito Hotend Mount
It also can be used on the original extruder body if cut as shown in picture. But I recommend printing the two redesigned R5 pieces new so you don't have to cut and take advantage of the side-way cooling as the fan sucks the air in an s-curve through the heatbrake. Best thing is that you can keep the stock noctua fan on the left. It is mounted sideways with the mosquito logo visible! It requires the fan shroud to prevent over cooling of the heat block.
For best performance use a brass nozzle and PID calibration after installation and increase temperature for all materials by 5-10 degrees Celsius.
Update:
This was my response to comment questioning the cooling efficiency in the side way mount position.
"Thanks for the comment. But I'm aware of this. If you check my design you will see that there is an air-blade in the design on one side. Guiding the air flow in an S-curve through the radiator as there are two different air pressures created. Don't forget its used with a much more powerful fan as the 40mm remains. I checked temperatures and the heat brake gets barley warm to the touch at any printing temperatures. I would argue that this design is superior because cooling surface is all around much greater and therefor much safer. Furthermore the hotend touches no plastic except the top mount part. Way safer than anything else out there!! Trust me I printed for days on full blast with this design. See it in action https://www.youtube.com/watch?v=x5Fft64mqsI
On a side note:
Melting temperatures of printable plastics are usually way below flame ignition point. So if your printer catches fire it usually comes from a malfunctioning PCB board / power supply and or flammable material left careless close to the printer...and not the hotend itself!
The fairy tale of instant 3d printer combustion into flames is quite frankly perpetuated by people who don't know what they are talking about! Scary actually."
It also can be used on the original extruder body if cut as shown in picture. But I recommend printing the two redesigned R5 pieces new so you don't have to cut and take advantage of the side-way cooling as the fan sucks the air in an s-curve through the heatbrake. Best thing is that you can keep the stock noctua fan on the left. It is mounted sideways with the mosquito logo visible! It requires the fan shroud to prevent over cooling of the heat block.
For best performance use a brass nozzle and PID calibration after installation and increase temperature for all materials by 5-10 degrees Celsius.
Update:
This was my response to comment questioning the cooling efficiency in the side way mount position.
"Thanks for the comment. But I'm aware of this. If you check my design you will see that there is an air-blade in the design on one side. Guiding the air flow in an S-curve through the radiator as there are two different air pressures created. Don't forget its used with a much more powerful fan as the 40mm remains. I checked temperatures and the heat brake gets barley warm to the touch at any printing temperatures. I would argue that this design is superior because cooling surface is all around much greater and therefor much safer. Furthermore the hotend touches no plastic except the top mount part. Way safer than anything else out there!! Trust me I printed for days on full blast with this design. See it in action https://www.youtube.com/watch?v=x5Fft64mqsI
On a side note:
Melting temperatures of printable plastics are usually way below flame ignition point. So if your printer catches fire it usually comes from a malfunctioning PCB board / power supply and or flammable material left careless close to the printer...and not the hotend itself!
The fairy tale of instant 3d printer combustion into flames is quite frankly perpetuated by people who don't know what they are talking about! Scary actually."
Similar models
thingiverse
free
Sapphire Plus/Pro Mosquito Mount by endva
... m2.5x8-10mm
mounting hardware for the bltouch that comes with it.
things in the works:
4020 fan guard
4010 fan support and guard
thingiverse
free
Mosquito / Dragon Hotend E3D V6 Mount by Superuser23
...uality is amazing.
use a drop of superglue in the little side holes of the mount to ensure there is no movement of the ptfe tube.
thingiverse
free
Fan duct for Dual Bowden rework E3Dv6 by GuruX
...se this, make sure that you do not heat your hotends, without the fans running. if you do that, you will easily clog your hotend.
thingiverse
free
Nf-crazy (Mosquito clone) hotend adapter for HyperCube 25mm/30mm fan
... fan duct nuts:https://www.thingiverse.com/thing:4129240
p.i.n.d.a. mount for hypercube:https://www.thingiverse.com/thing:4129417
thingiverse
free
Anycubic MK4 Carrier for Mellow NF and Mosquito by lama1048
...the high temperature of the hotend.
i needed to adjust the bed to be around 2mm lower, wihich i did with the bed leveling screws.
thingiverse
free
Slice Mosquito 5015 Cooling Fan Duct by jslaker
...ould be capable of moving significantly more air than the stock fan and can be pwm'd down accordingly to reduce blower noise.
thingiverse
free
Mosquito hotend centrifugal fan adapter by Kosmonautas
...eat creep problem i decided to make an adapter for a much more powerful centrifugal fan.
feel free to modify or to criticize :d .
thingiverse
free
Kossel Pro - improved cooling by j3stef
...work for any printer with the specified hotend or similar ones. the radius of the cooling pipe lets enoguh...
thingiverse
free
Kingroon KP3 Hotend Fan Shroud by AttilaSVK
...ake off the washers!
print from abs or asa for maximum temperature resistance, although the top will be cooled by the hotend fan.
thingiverse
free
Mellow NF-Crazy hotend 4010 axial + 2 blower fan mount(should work with Mosquito hotend too)
...e on top of it in case of wiring lose to prevent a short circuit from aluminium tape. not really necessary but for peace of mind.
Superuser23
thingiverse
free
Wacom Pen Holder by Superuser23
...wacom pen holder by superuser23
thingiverse
simple wacom intuos pen holder
holds the pen at a slight angle or straight.
thingiverse
free
Mosquito / Dragon Hotend E3D V6 Mount by Superuser23
...uality is amazing.
use a drop of superglue in the little side holes of the mount to ensure there is no movement of the ptfe tube.
Mosquito
design_connected
$16
Mosquito
...mosquito
designconnected
rex kralj mosquito computer generated 3d model. designed by kralj, niko.
3d_export
$5
Mosquito
...of some place that is destroyed or abandoned long ago. with such models the application would top the charts and prove its worth.
turbosquid
$100
Mosquito
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$69
Mosquito
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$22
mosquito
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$20
Mosquito
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$15
mosquito
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$3
Mosquito
... model mosquito for download as 3ds, obj, fbx, blend, and dae on turbosquid: 3d models for games, architecture, videos. (1311331)
3d_export
$25
mosquito
...mosquito
3dexport
simple rendering of the scene file
3d_export
$10
Mosquito 3D Model
...mosquito 3d model
3dexport
mosquito insect bug hexapod flyer
mosquito 3d model def 19400 3dexport
Mk3
turbosquid
$50
cention mk3
...ty free 3d model cention mk3 for download as ma, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1454148)
turbosquid
$129
MK3 Tank
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$100
Toyota Supra MK3
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$44
cention mk3 low poly
...d model cention mk3 low poly for download as ma, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1454666)
turbosquid
$30
Challenger I Mk3 Falcon
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$10
American Frag hand grenade MK3
...free 3d model american frag hand grenade mk3 for download as on turbosquid: 3d models for games, architecture, videos. (1393624)
turbosquid
$20
Mk3 US Navy Combat Knife
...ty free 3d model mk3 us navy combat knife for download as fbx on turbosquid: 3d models for games, architecture, videos. (1172791)
3d_export
$29
Ford Fiesta MK3 Modified 3D Model
...7 tumerfx mtumer mehmet t?mer 1993 1995 1996 wrc special modifed modifiye
ford fiesta mk3 modified 3d model mtumer 30698 3dexport
3d_export
$99
Toyota Supra Mk3 19861993 3D Model
...ort fast coupe japan 1986 1987 1988 1989 1990 1991 1992 1993 tuning turbo
toyota supra mk3 19861993 3d model squir 62530 3dexport
turbosquid
$5
Timothy Oulton Mars Chair MK3
...on mars chair mk3 for download as 3ds, max, obj, fbx, and dae on turbosquid: 3d models for games, architecture, videos. (1209782)
Hotend
thingiverse
free
hotend by fablab_lueneburg
...hotend by fablab_lueneburg
thingiverse
hotend model
thingiverse
free
Hotend for Graber
...hotend for graber
thingiverse
hotend complement pastes for graber printerhttps://youtu.be/0koxhnsuhdy
thingiverse
free
Hotend adapter by antaviana
...hotend adapter by antaviana
thingiverse
hotend adapter
thingiverse
free
hotend fan by mming1106
...hotend fan by mming1106
thingiverse
hotend fan
thingiverse
free
Hotend schema by ione
...hotend schema by ione
thingiverse
hotend project schema
thingiverse
free
Fabtotum XY Hotend holder for E3D Hotend
...s with integrated supports.
more for the project you can see here: https://kf-designs.com/2019/09/07/fabtotum-printer-conversion/
thingiverse
free
HotEnd Stand by onepointdiy
...tend, when you make your new hotend or repair your j-head or mg-plus hotend.
the hole of 16mm, please adjust using a reamer, etc.
thingiverse
free
fast magnetic hotend changer for Chimera Hotend by Draman
...chimera hotend !
and new basis (the hole from original is to small)
it is a remix form skimmy's fast magnetic hotend changer
thingiverse
free
Hotend Fan Adapter for MicroSwiss All Metal Hotend by jo_schi_man
...
thingiverse
little change for the hotend fan adapter to hold the microswiss all metal hotend (slightly longer and sharp edges).
thingiverse
free
Merlin Hotend by Alejanson
...merlin hotend by alejanson
thingiverse
this is a 1:1 drawing of the classic merlin hotend.
Prusa
turbosquid
$2
Frame Filament Guide Clip-On for Prusa Mk3
...rame filament guide clip-on for prusa mk3 for download as stl on turbosquid: 3d models for games, architecture, videos. (1634730)
3d_export
free
prusa i3 mk3s laser mount for opt lasers
...to learn more about the blue laser technology that conceived the cutting and engraving laser heads from opt lasers, please visit:
turbosquid
free
Prusa small printer adapter holder
...er for download as ipt, skp, dwg, dxf, fbx, ige, obj, and stl on turbosquid: 3d models for games, architecture, videos. (1642936)
3d_export
$30
geisha by jonathan adler
...** i did a 3d printing test in the prusa software, you can find it among the attached images.<br>exchange:<br>.blend...
thingiverse
free
Prusa without Prusa (rc2) by madless
...prusa without prusa (rc2) by madless
thingiverse
just the main part of prusa rc2 faceshield, without writing.
enjoy :)
thingiverse
free
Prusa by acejbc
...prusa by acejbc
thingiverse
prusa knob info
m3 8mm screw
thingiverse
free
Prusa house
...prusa house
thingiverse
how prusa house could look like...
thingiverse
free
Prusa Mk2 "Fake Prusa" LCD cover by anraf1001
...r by anraf1001
thingiverse
version of prusa's lcd cover with "fake prusa" instead of "original prusa"
thingiverse
free
Prusa stabilizator by gutiueugen
...prusa stabilizator by gutiueugen
thingiverse
prusa stabilizator
thingiverse
free
Keychain Prusa by rbarbalho
...keychain prusa by rbarbalho
thingiverse
keychain with text prusa.
Mount
3d_export
free
mounting bracket
...mounting plate is the portion of a hinge that attaches to the wood. mounting plates can be used indoors, cabinetry and furniture.
turbosquid
$2
MOUNTING
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
Mounts
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
Mount Fuji
...fuji
turbosquid
free 3d model mount fuji for download as obj on turbosquid: 3d models for games, architecture, videos. (1579977)
3d_export
$5
Headphone mount LR
...headphone mount lr
3dexport
headphone mount l+r
turbosquid
$39
Mount rainier
...quid
royalty free 3d model mount rainier for download as fbx on turbosquid: 3d models for games, architecture, videos. (1492586)
turbosquid
$5
pipe mounting
...quid
royalty free 3d model pipe mounting for download as obj on turbosquid: 3d models for games, architecture, videos. (1293744)
turbosquid
$3
Mounting Tires
...uid
royalty free 3d model mounting tires for download as fbx on turbosquid: 3d models for games, architecture, videos. (1708511)
3d_export
$5
Magnetic GoPro Mount
...pro mount
3dexport
cool magnetic mount for gopro. allows you to mount the camera on flat metal surfaces and get exclusive shots.
turbosquid
$5
Stone Mount
...ty free 3d model stone mount for download as ma, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1370306)