MiSTer XS Case v2 for SDRAM XS - extra slim - v1.1 by NegSol

Last crawled date: 4 years, 7 months ago

Slightly larger version of the compact version of the MiSTer case for a 40x40x10mm fan and for SDRAM XS - extra slim - v1.1 only!
All in all 4 mm higher than MiSTer XS Case V1.
This case is for you if you want a minimum of case and still want to use the v5.2/v5.5/v6.0 I/O board's connectivity.
Buttons are to be printed in place with the Top Shell. Also there are new holes for the LEDs of the I/O Board.
There is an additional Top Shell without LEDs and without buttons. Pick the one you like best.
Update - 21.05.2019
Added MiSTer_Case_v52XS_Buttom_P4_Fix1.stl - More clearance for the SD Memory Card Connector on the underside of the DE10.
Update - 05.11.2018
Added MiSTer_Case_v52XS_Top_P4_High_Tolerance_Buttons.stl
For printer setups not able to print the finer, tighter original tolerances I added a Top shell with wider gaps between buttons and case (MiSTer_Case_v52XS_Top_P4_High_Tolerance_Buttons.stl).
Print in PLA.
Pictures of your printed cases are highly welcome of course.
Enjoy.
https://github.com/MiSTer-devel/Main_MiSTer/wiki
http://www.atari-forum.com/viewtopic.php?f=117&t=32882
--
Also available on shapeways:
https://www.shapeways.com/shops/negsol-design