Thingiverse
MiSTer - Case v1.0 *Updated* by NegSol
by Thingiverse
Last crawled date: 4 years, 5 months ago
obsolescence warning
Please use these versions of the case instead:
https://www.thingiverse.com/thing:2740925
https://www.thingiverse.com/thing:2684660
obsolescence warning
MiSTer - Case v1.0
This is a case for the DE10 Nano board. The case was made for the MiSTer FPGA project.
The case prints well in PLA. Supports are advised for the SD-Card slot section only (extra STL is provided). For the logo make sure you adjust your printer settings to extra fine. Logo can be glued on later should you print it in a different color. Alternatively use
MISTer_v1_Plate_Net_Logo.stl the plate with the logo already attached.
Added new files for the MiSTer logo and front plate with logo for those who want the correct spelling with lower case "i" (all files ending with ilogo).
Update
I added a new top shell for the case integrating a spot for a 40x40x10 fan right above the FPGA chip. It helps with cooling and leaves enough room to place a decent heightened heatsink (with max. of 10.2mm height) on top of the FPGA. There are actually two files.
MISTer v1 Top Shell Fan.stl is the one I used - I broke of two of the clamps as it is really snug but otherwise it is a perfect fit!
MISTer v1 Top Shell Fan_L.stl is another version with 0.2 mm longer clamps. I made if somebody need some extra space ;-P - Longer clamps would affect the heatsink option.
More info on the case: http://www.atari-forum.com/viewtopic.php?f=101&t=32067
More info on the MiSTer project can be found under these links:
https://github.com/MiSTer-devel/Main_MiSTer/wiki
http://www.atari-forum.com/viewtopic.php?f=101&t=31825
--
Also available on shapeways:
https://www.shapeways.com/shops/negsol-design
Please use these versions of the case instead:
https://www.thingiverse.com/thing:2740925
https://www.thingiverse.com/thing:2684660
obsolescence warning
MiSTer - Case v1.0
This is a case for the DE10 Nano board. The case was made for the MiSTer FPGA project.
The case prints well in PLA. Supports are advised for the SD-Card slot section only (extra STL is provided). For the logo make sure you adjust your printer settings to extra fine. Logo can be glued on later should you print it in a different color. Alternatively use
MISTer_v1_Plate_Net_Logo.stl the plate with the logo already attached.
Added new files for the MiSTer logo and front plate with logo for those who want the correct spelling with lower case "i" (all files ending with ilogo).
Update
I added a new top shell for the case integrating a spot for a 40x40x10 fan right above the FPGA chip. It helps with cooling and leaves enough room to place a decent heightened heatsink (with max. of 10.2mm height) on top of the FPGA. There are actually two files.
MISTer v1 Top Shell Fan.stl is the one I used - I broke of two of the clamps as it is really snug but otherwise it is a perfect fit!
MISTer v1 Top Shell Fan_L.stl is another version with 0.2 mm longer clamps. I made if somebody need some extra space ;-P - Longer clamps would affect the heatsink option.
More info on the case: http://www.atari-forum.com/viewtopic.php?f=101&t=32067
More info on the MiSTer project can be found under these links:
https://github.com/MiSTer-devel/Main_MiSTer/wiki
http://www.atari-forum.com/viewtopic.php?f=101&t=31825
--
Also available on shapeways:
https://www.shapeways.com/shops/negsol-design