Thingiverse
Minn Kota Prop Cage by tamas
by Thingiverse
Last crawled date: 3 years, 1 month ago
Elkana contacted me with the idea of designing a trolling motor cage. I actually do not have the motor so the measurements might varies... This is my first attempt to have this cage for a motor.
I used the following measurement, after confirming with Elkana:
mount_ring_outer_dia=83.44mm
cage_ring_outer_dia=280mm
The cage ring and the mount ring is 50 mm apart
The mount ring and the cage ring is printed in two pieces each and 3mm stainless bolt and nuts shall be used to put them together.
The middle protective ring was updated as two piece print and the blades shall be slid through as putting together each sides. It is tilted cut 22.5 degrees housing 4 blades each
The 8 blades shall be printed separately again..
The blades are locking in to the Mount ring and the cage ring at assembly...
I redesigned the blade Cage side ends to give more space to the prop and having a smaller cage ring with 280 diameter, also coming to the fact when assembling it must fit and slide through the middle ring hole, what the previous iteration would not do...
I have not printed this design, so please use it at your own risk, if you think the measurements are not correct please contact me!
If you really like it you could donate via thingiverse.
I suggest to
print the mount rings first and see if the size is fitting ok
print a middle ring and a blade as second print to see if mounting together works
if all ok print outer cage ring and more blades...
Enjoy.. :)
I used the following measurement, after confirming with Elkana:
mount_ring_outer_dia=83.44mm
cage_ring_outer_dia=280mm
The cage ring and the mount ring is 50 mm apart
The mount ring and the cage ring is printed in two pieces each and 3mm stainless bolt and nuts shall be used to put them together.
The middle protective ring was updated as two piece print and the blades shall be slid through as putting together each sides. It is tilted cut 22.5 degrees housing 4 blades each
The 8 blades shall be printed separately again..
The blades are locking in to the Mount ring and the cage ring at assembly...
I redesigned the blade Cage side ends to give more space to the prop and having a smaller cage ring with 280 diameter, also coming to the fact when assembling it must fit and slide through the middle ring hole, what the previous iteration would not do...
I have not printed this design, so please use it at your own risk, if you think the measurements are not correct please contact me!
If you really like it you could donate via thingiverse.
I suggest to
print the mount rings first and see if the size is fitting ok
print a middle ring and a blade as second print to see if mounting together works
if all ok print outer cage ring and more blades...
Enjoy.. :)
Similar models
thingiverse
free
Butterfly Knife Pen by Justdatguy227
...ving when the blade is out.
if you have any troubles, you may need to sand parts down, glue them together, or use common sense.
thingiverse
free
Printed Motor Mount for Sherline Machines by tymm
...mounting screws, of course).
tested so far for fit (with bearings), but will be a bit yet before i'm able to test function.
thingiverse
free
Singing Belle (Bell) by Greenfieldaddy
...ld be interested in any feedback.
i have included a xmodel that i put together. it assumes at least 4" node spacing.
enjoy.
thingiverse
free
Roman Gladius Sword by Mordon011
...at is used to connect the blade to the hilt. the pieces should fit together straight after printing and should be glued together.
thingiverse
free
Bestron Vacuum Head Bracket
...the original piece however if you start by putting in the middle tab first and then both tabs to the sides it should fit snuggly!
thingiverse
free
RWBY - Ember Celica
...ploaded so feel free to use that one if you also have very small wrists. i'll work on getting the larger sizes uploaded soon
thingiverse
free
Cube Puzzle by ImStillDead
...ld make a cube after assembled. in order to put together this puzzle you will have to put each piece together in a certain order.
thingiverse
free
P-38 Wall Decal by Mdavisgtm
... almost 3 feet wingtip to wingtip. i assembled all the pieces using duct tape on the back side and it holds together pretty good.
thingiverse
free
Quadcopter by careyi3
...g on your print you may need to widen the holes.
the motor mounting holes on each strut are designed to fit an emax cf2822 motor.
thingiverse
free
PLA Spring motor, rolling car easy to mount by benraay
...made all the new pieces with fusion 360 (very similar to...
Minn
thingiverse
free
Drafan Minn by Roundpiece
...drafan minn by roundpiece
thingiverse
a sith lord called drafan minn. i belive she is quite evil. but who knows.
thingiverse
free
Minn Kota Trolling Motor Steering Bracket/ Triangle by AGrgic
...nd it works perfect. print it as follows:
petg
230/ 75 temp
100% infill
supports not required, but you can put them if you want.
thingiverse
free
Up!mini 3D Spoolholder by minne
...!mini 3d spoolholder by minne
thingiverse
i create a new 80mm spoolholder for the up mini 3d.
use for 1kg formfutura abs and pla
thingiverse
free
Minn Kota Edge Transducer Bracket by wilsonrn22
...ork as well.
i suggest using petg with supports.
i have tested this print on my trolling motor for a year and has worked great.
thingiverse
free
Minn Kota Trolling Motor Lift System
...s00?ie=utf8&psc=1
1/4 ropehttps://smile.amazon.com/gp/product/b07p1mwwm8/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=utf8&psc=1
thingiverse
free
Minn Kota Endura prop variations by tamas
...prop. so i created some and also added more blades for higher pitch. this is related to my previous designs for the same topic...
thingiverse
free
Prop for Minn Kota Endura electric boat motor by tamas
...roces..... brilliant results....
we have not tried using the printed plastic on the motor...i think this is not strong enough....
thingiverse
free
Minn Kota Steering by Theo_Frieling
...e the black jack connector on the power shield.
you have to develop the software to control the servo yourself, so don't ask.
thingiverse
free
Frontdoor Flashforge Dreamer by minne
... the magnetholders and the top and bottom hinges.
magnetholders pressfit in holes d7.1mm
pressfit m3 in hinges
magnets are d4x4mm
thingiverse
free
Minn Kota i-Pilot remote holder (+ stronger version) by pregananant
...pilot_holder_w_stronger_clips.stl).
mounting:
4 screws or 2 cable ties
update 2018-02-26: i added a version with stronger clips.
Tamas
design_connected
$11
Tama
...tama
designconnected
walter knoll tama computer generated 3d model. designed by eoos.
design_connected
free
Tama Crédence
...tama crédence
designconnected
free 3d model of tama crédence by gallotti & radice designed by colombo, carlo.
design_connected
free
Tama Console
...tama console
designconnected
free 3d model of tama console by gallotti & radice designed by colombo, carlo.
turbosquid
$39
Tama Credence
...3d model tama credence for download as 3ds, max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1297858)
3ddd
$1
Porada Tama
...porada tama
3ddd
porada tama , porada
46.5 cm w x 52 cm d x 78 cm h
seat height: 46 cm
3ddd
$1
Porada / Tama
...porada / tama
3ddd
porada
стул с мягкой обивкой.
28k poly
turbosquid
$15
Walter Knoll Tama
... 3d model walter knoll tama for download as max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1259783)
turbosquid
$12
TAMA LIVIN - sofa
... 3d model tama livin - sofa for download as max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1243697)
3d_export
$49
Castagnari Shower Tama 3D Model
...taly style bathroom bath shower toilet environment telephone water box tama
castagnari shower tama 3d model fabelar 8866 3dexport
turbosquid
$64
Gallotti Radice Tama Set
...el gallotti radice tama set for download as max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1287393)
Kota
3d_export
$15
Kota 3D Model
...kota 3d model
3dexport
music exotic guitare wood instrument japan
kota 3d model myxerman 19848 3dexport
turbosquid
$200
Balai kota Jakarta
...3d model balai kota jakarta for download as 3ds, obj, and c4d on turbosquid: 3d models for games, architecture, videos. (1448267)
3d_export
$15
Kota 3D Model
...dexport
ko?ta? tv wallunit
kota 3d model download .c4d .max .obj .fbx .ma .lwo .3ds .3dm .stl ae.ps.3ds.201567340 113147 3dexport
design_connected
$16
African Gabon Kota Tribal Mask
...african gabon kota tribal mask
designconnected
african gabon kota tribal mask computer generated 3d model.
3d_sky
free
Gabon - Kota
...gabon - kota
3dsky
gabon - african wooden product kota tribe.
3d_sky
free
Kota
...kota
3dsky
cat
model with textures, the height of a large cat of about 15 cm
thingiverse
free
Kota Reliquary Figure by Bengal12
...kota reliquary figure by bengal12
thingiverse
this is a scan of a kota reliquary figure.
thingiverse
free
Minn Kota Trolling Motor Steering Bracket/ Triangle by AGrgic
...nd it works perfect. print it as follows:
petg
230/ 75 temp
100% infill
supports not required, but you can put them if you want.
thingiverse
free
Minn Kota Edge Transducer Bracket by wilsonrn22
...ork as well.
i suggest using petg with supports.
i have tested this print on my trolling motor for a year and has worked great.
thingiverse
free
Minn Kota Trolling Motor Lift System
...s00?ie=utf8&psc=1
1/4 ropehttps://smile.amazon.com/gp/product/b07p1mwwm8/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=utf8&psc=1
Cage
3d_export
$5
cage
...cage
3dexport
cage
archibase_planet
free
Cage
...cage
archibase planet
cage bird cage birdcage
cage 2 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Cage
...cage
archibase planet
cage bird cage birdcage
cage 1 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Cage
...cage
archibase planet
cage bird cage birdcage
cage 3 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Cage
...cage
archibase planet
bird's cage cage
cage n020909 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Cage
...cage
archibase planet
cage
cage monte- 3d model for interior 3d visualization.
3d_export
$7
cage
...cage
3dexport
3d cage model
archibase_planet
free
Cage
...cage
archibase planet
cage
cage n270211 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
turbosquid
$5
Cage
...ge
turbosquid
royalty free 3d model cage for download as dwg on turbosquid: 3d models for games, architecture, videos. (1224275)
turbosquid
$4
cage
...squid
royalty free 3d model cage for download as max and fbx on turbosquid: 3d models for games, architecture, videos. (1368360)
Prop
3ddd
$1
Props
...props
3ddd
props
3d_ocean
$10
Props
...ject you need this props design this 6 taype for props to get your design perfect and nice file include : 1 max 2 obj 3 3ds 4 zip
turbosquid
$15
Props
...s
turbosquid
royalty free 3d model props for download as max on turbosquid: 3d models for games, architecture, videos. (1249032)
turbosquid
$1
PROPS
...d model props for download as unitypackage, obj, fbx, and tga on turbosquid: 3d models for games, architecture, videos. (1627660)
turbosquid
$5
props
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
PROP
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
$1
kids props
...kids props
3ddd
декоративный набор
kids props
3d_ocean
$8
Street props
...l barrier prop roads street street prop
street props game models barrel barrier roads aircos jerrycan models fbx obj and max file
turbosquid
$39
Apocalyptic Props
...uid
royalty free 3d model apocalyptic props for download as on turbosquid: 3d models for games, architecture, videos. (1380028)
turbosquid
$1
Bunker props
...rbosquid
royalty free 3d model bunker props for download as on turbosquid: 3d models for games, architecture, videos. (1196014)