Thingiverse
![MINIX Z83-4 mounting bracket for CG-1000XL enclosure by ShinyObjects](/previews/8586966.jpg)
MINIX Z83-4 mounting bracket for CG-1000XL enclosure by ShinyObjects
by Thingiverse
Last crawled date: 3 years, 1 month ago
This bracket will allow you to mount a MINIX Z83-4 Mini PC inside a CableGuard CG-1000XL enclosure using the Vesa mount that is included with the MINIX (pro version only, but mount available for purchase for about $15 for the standard version).
The bracket attaches to the enclosure with four #8x1/2" pan head screws.
The MINIX can be mounted with the antenna oriented at the top or on the right side. You'll likely need to increase the height of the holes in the enclosure (as shown in the picture) or make a horizontal slotted hole in line with the USB or HDMI ports if your cables cannot bend within the enclosure.
I recommend printing in ABS or PETG to avoid it softening in a hot place/vehicle.
The bracket attaches to the enclosure with four #8x1/2" pan head screws.
The MINIX can be mounted with the antenna oriented at the top or on the right side. You'll likely need to increase the height of the holes in the enclosure (as shown in the picture) or make a horizontal slotted hole in line with the USB or HDMI ports if your cables cannot bend within the enclosure.
I recommend printing in ABS or PETG to avoid it softening in a hot place/vehicle.
Similar models
thingiverse
free
![MiniX wall mount enclosure for Minix Neo Z83-4 by Marcel_X](/t/8753927.jpg)
MiniX wall mount enclosure for Minix Neo Z83-4 by Marcel_X
...the slots.
use four m3 x 25 screws for the top part.
before screwing on the top part, mount the bottom part to the wall first :-)
thingiverse
free
![Minix Neo Z83-4 Mount by lalee](/t/8681873.jpg)
Minix Neo Z83-4 Mount by lalee
...ne in abs using 2 outer shells and 10% infill (lowest settings i'm comfortable with for a bracket), and they turned out fine.
thingiverse
free
![Minix Neo x8-H pluse mount by thedemri](/t/8897290.jpg)
Minix Neo x8-H pluse mount by thedemri
... x8 holder ver2 1.5 mm smaller that is 1.5 x and 1.5 y smaller.
print it with support.
i will ad an ir mirror later
thanks
thingiverse
free
![TUSH with M6 hole and mounting bracket by radicaledvard](/t/8694171.jpg)
TUSH with M6 hole and mounting bracket by radicaledvard
... top 8020 aluminum extrusion.
you need 4 of the modified tush and 2 or 4 of the holders depending on how you chose to mount them.
thingiverse
free
![F4 Differential Receiver to CG Enclosure Mount](/t/4908574.jpg)
F4 Differential Receiver to CG Enclosure Mount
...eet metal screws to attach the receiver to the bracket.
use #8 wood or sheet metal screws to attach the bracket to the enclosure.
thingiverse
free
![RAMPS LCD 12864 Enclosure by dldesign](/t/8782290.jpg)
RAMPS LCD 12864 Enclosure by dldesign
...e http://www.thingiverse.com/thing:1906686 for another version of the mounting bracket designed to be mounted to a shelving unit
thingiverse
free
![Inside corner bracket 1/4" holes for bolts or magnets by Jmurray](/t/8628479.jpg)
Inside corner bracket 1/4" holes for bolts or magnets by Jmurray
...magnets by jmurray
thingiverse
corner bracket with 1/4" bolt holes. i used this to assemble an enclosure for my 3d printer.
thingiverse
free
![Pole Mount Bracket for Weatherproof Enclosure by micromet](/t/9244508.jpg)
Pole Mount Bracket for Weatherproof Enclosure by micromet
...d 7/16" diameter garden stake. the openscad code can be adapted to fit any size enclosure with mounting holes on the back.
thingiverse
free
![PS3 Eye Camera Mount for different positions by ccvh](/t/8759433.jpg)
PS3 Eye Camera Mount for different positions by ccvh
...based enclosure.
to close the enclosure use 3mm machine screws with nuts.
the holes for mounting are made to fit 3mm spax screws.
thingiverse
free
![MOSFET YYNMOS-4 Board Enclosure by Macbolan75](/t/8619490.jpg)
MOSFET YYNMOS-4 Board Enclosure by Macbolan75
...irrored the wrong way the first time so if you downloaded a version prior to 12/7/2017 you will need to get the updated stl's
1000Xl
Minix
3d_export
$10
![Minix Mini Dryer 3kg](/t/11369747.jpg)
Minix Mini Dryer 3kg
...~ 100,000 model parts: 1 texture format: .png .jpg resolution: 1024*1024 pbr in substance painter formats: .obj .gltf .fbx .blend
thingiverse
free
![Minix NEO X7 stand by neilv](/t/8969298.jpg)
Minix NEO X7 stand by neilv
...minix neo x7 stand by neilv
thingiverse
a stand for the minix neo x7.
thingiverse
free
![MiniX wall mount enclosure for Minix Neo Z83-4 by Marcel_X](/t/8753927.jpg)
MiniX wall mount enclosure for Minix Neo Z83-4 by Marcel_X
...the slots.
use four m3 x 25 screws for the top part.
before screwing on the top part, mount the bottom part to the wall first :-)
thingiverse
free
![Minix Neo x8-H pluse mount by thedemri](/t/8897290.jpg)
Minix Neo x8-H pluse mount by thedemri
... x8 holder ver2 1.5 mm smaller that is 1.5 x and 1.5 y smaller.
print it with support.
i will ad an ir mirror later
thanks
thingiverse
free
![M.Project v.7(Mini version) "Minix" by creativesam](/t/8583341.jpg)
M.Project v.7(Mini version) "Minix" by creativesam
...(mini version) "minix" by creativesam
thingiverse
m.project v.7(mini version) "minix"
x 100mm
y 100mm
z 70mm
thingiverse
free
![Minix Neo Z83-4 Mount by lalee](/t/8681873.jpg)
Minix Neo Z83-4 Mount by lalee
...ne in abs using 2 outer shells and 10% infill (lowest settings i'm comfortable with for a bracket), and they turned out fine.
thingiverse
free
![Minix Neo X8 plus holder for wall or back of tv by woodzie](/t/8874824.jpg)
Minix Neo X8 plus holder for wall or back of tv by woodzie
..., the android figure is taken from a fridge magnet thing i downloaded. http://www.thingiverse.com/thing:10434
dust is optional.
thingiverse
free
![Vesa mount for Minix X5 / X7 / X8H by alexbern80](/t/5034652.jpg)
Vesa mount for Minix X5 / X7 / X8H by alexbern80
...ws with a 6mm flat head are required. i suggest to use a big and strong screwdriver or you could have trouble in screwing.
enjoy!
thingiverse
free
![MP Select MiniX-Axis Gantry Support Bolt-Over by mrdralixx](/t/8644475.jpg)
MP Select MiniX-Axis Gantry Support Bolt-Over by mrdralixx
... gantry support with vents to the vented no-drilling rewire, appears to be beyond mine and 123d's capabilities at this point.
Z83
thingiverse
free
![Minix Neo Z83-4 Mount by lalee](/t/8681873.jpg)
Minix Neo Z83-4 Mount by lalee
...ne in abs using 2 outer shells and 10% infill (lowest settings i'm comfortable with for a bracket), and they turned out fine.
thingiverse
free
![MiniX wall mount enclosure for Minix Neo Z83-4 by Marcel_X](/t/8753927.jpg)
MiniX wall mount enclosure for Minix Neo Z83-4 by Marcel_X
...the slots.
use four m3 x 25 screws for the top part.
before screwing on the top part, mount the bottom part to the wall first :-)
thingiverse
free
![SunFounder 10.1" Touchscreen Enclosure by zero_divide](/t/8242462.jpg)
SunFounder 10.1" Touchscreen Enclosure by zero_divide
...the right half has mounting and i\o holes for z83 mini pc motherboard. modify for your...
cg_trader
$99
![Z83-Diamond set | 3D](/t/8393212.jpg)
Z83-Diamond set | 3D
...z83-diamond set | 3d
cg trader
1,50 , 1,10 , 1,75 gems
cg_trader
$3
![Cylindrical gear - paired - z83 m2 D170 d30 | 3D](/t/11917027.jpg)
Cylindrical gear - paired - z83 m2 D170 d30 | 3D
...rint steel metal plastic tool part industrial mechanism machinery differential technology engine transmission science engineering
cg_trader
$3
![Cylindrical gear - paired - z83 m2 D170 d25 | 3D](/t/11917028.jpg)
Cylindrical gear - paired - z83 m2 D170 d25 | 3D
...rint steel metal plastic tool part industrial mechanism machinery differential technology engine transmission science engineering
cg_trader
$3
![Cylindrical gear - paired - z83 m2 D170 d20 | 3D](/t/11917029.jpg)
Cylindrical gear - paired - z83 m2 D170 d20 | 3D
...rint steel metal plastic tool part industrial mechanism machinery differential technology engine transmission science engineering
cg_trader
$3
![Cylindrical gear - paired - z83 m1 D85 d20 | 3D](/t/11917770.jpg)
Cylindrical gear - paired - z83 m1 D85 d20 | 3D
...rint steel metal plastic tool part industrial mechanism machinery differential technology engine transmission science engineering
cg_trader
$3
![Cylindrical gear - paired - z83 m1 D85 d15 | 3D](/t/11917773.jpg)
Cylindrical gear - paired - z83 m1 D85 d15 | 3D
...rint steel metal plastic tool part industrial mechanism machinery differential technology engine transmission science engineering
Shinyobjects
thingiverse
free
![LED Strip Arch Clip by ShinyObjects](/t/8661855.jpg)
LED Strip Arch Clip by ShinyObjects
...
thingiverse
low profile clip for led strip arches.
they are 18 mm wide with notches for the zip ties to fit inside 1" pex.
thingiverse
free
![Halloween Spider Snowflake by ShinyObjects](/t/8649627.jpg)
Halloween Spider Snowflake by ShinyObjects
...ased on a paper cutout version by penolopy bulnick on instructables:http://www.instructables.com/id/jacks-paper-spider-snowflake/
thingiverse
free
![Clicgear GPS / Phone Mounting Tab by ShinyObjects](/t/8529228.jpg)
Clicgear GPS / Phone Mounting Tab by ShinyObjects
...ne holder.
i use a gps app on my phone so i printed a case for it, super-glued a tab to the back and it holds my phone perfectly.
thingiverse
free
![PEX Arch End Cap by ShinyObjects](/t/8660803.jpg)
PEX Arch End Cap by ShinyObjects
...igtails and you can provide strain relief for the wires by putting a zip tie around the cable located just inside of the end cap.
thingiverse
free
![19th Hole Sign by ShinyObjects](/t/8268523.jpg)
19th Hole Sign by ShinyObjects
... taking care to align top of dome with nail recess.
two holes for #8 screws are also provided to screw into back side if desired.
thingiverse
free
![P10 Terminal Block Mount by ShinyObjects](/t/8654090.jpg)
P10 Terminal Block Mount by ShinyObjects
...d of some screws are just slightly too big to fit in the upper part of the hole. i ended up using a #8 socket cap screw instead.
thingiverse
free
![Pixel Spring Clip by ShinyObjects](/t/8644919.jpg)
Pixel Spring Clip by ShinyObjects
...r that widened portion is inside clip. fit should be enough to hold the pixels in place with just the flat body inside the clip.
thingiverse
free
![Haunted Mansion Wreath Skull by ShinyObjects](/t/8649090.jpg)
Haunted Mansion Wreath Skull by ShinyObjects
...istmas themed display/show.
i drilled three small holes near the bottom to zip tie it to my wreath.
9/17/18 - added solid version
thingiverse
free
![PEX Arch - PVC Adapter by ShinyObjects](/t/8083776.jpg)
PEX Arch - PVC Adapter by ShinyObjects
... set of nuts hold the bolts in place prior to adding the floor flange, plus they help keep the flange more centered on the bolts.
thingiverse
free
![Bird Feeder Squirrel Guard by ShinyObjects](/t/8570130.jpg)
Bird Feeder Squirrel Guard by ShinyObjects
...he cone fits loosely to the center hub so that it can tip and spin, preventing the squirrels from being able to get on top of it.
Enclosure
3d_export
free
![electrical enclosure](/t/11488039.jpg)
electrical enclosure
...l enclosure where electrical devices like (relays, contactors, busbars ) are kept in order to protect from hazardous environment.
turbosquid
$100
![GPU Enclosure](/t/13245994.jpg)
GPU Enclosure
...yalty free 3d model gpu enclosure for download as obj and stl on turbosquid: 3d models for games, architecture, videos. (1381061)
3d_export
$5
![Electrical Enclosure](/t/11943311.jpg)
Electrical Enclosure
...ed. also has tower lights attaced on the top.<br>file format that are available:<br>.step<br>.obj<br>.stl
archive3d
free
![Enclosure 3D Model](/t/1080455.jpg)
Enclosure 3D Model
...closure 3d model
archive3d
shower enclosure-acquarius- 3d model for interior 3d visualization.
archive3d
free
![Enclosure 3D Model](/t/1080457.jpg)
Enclosure 3D Model
...enclosure 3d model
archive3d
shower enclosure-omega- 3d model for interior 3d visualization.
archive3d
free
![Enclosure 3D Model](/t/1080461.jpg)
Enclosure 3D Model
...enclosure 3d model
archive3d
shower enclosure-vega - 3d model for interior 3d visualization.
archive3d
free
![Enclosure 3D Model](/t/1080465.jpg)
Enclosure 3D Model
...enclosure 3d model
archive3d
shower enclosure-zenith - 3d model for interior 3d visualization.
turbosquid
$20
![shower enclosure](/t/13299902.jpg)
shower enclosure
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$14
![Dumpster Enclosure](/t/13375053.jpg)
Dumpster Enclosure
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$25
![3d printer enclosure](/t/13286993.jpg)
3d printer enclosure
... model 3d printer enclosure for download as ipt, skp, and fbx on turbosquid: 3d models for games, architecture, videos. (1634310)
Bracket
archibase_planet
free
![Bracket](/t/945862.jpg)
Bracket
...bracket
archibase planet
bracket corbel holder
bracket 1 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
![Bracket](/t/945864.jpg)
Bracket
...bracket
archibase planet
bracket corbel console
bracket 5 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
![Bracket](/t/945865.jpg)
Bracket
...bracket
archibase planet
corbel holder bracket
bracket 6 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
![Bracket](/t/945866.jpg)
Bracket
...bracket
archibase planet
bracket corbel console
bracket 8 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
![Bracket](/t/945867.jpg)
Bracket
...bracket
archibase planet
bracket corbel holder
bracket n280911 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
![Bracket](/t/946539.jpg)
Bracket
...bracket
archibase planet
holder corbel bracket
bracket 9 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
![Bracket](/t/946540.jpg)
Bracket
...bracket
archibase planet
corbel holder bracket
bracket 10 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
![Bracket](/t/946541.jpg)
Bracket
...bracket
archibase planet
corbel console bracket
bracket 11 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
![Bracket](/t/946542.jpg)
Bracket
...bracket
archibase planet
holder console bracket
bracket 12 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
![Bracket](/t/946544.jpg)
Bracket
...bracket
archibase planet
bracket corbel holder
bracket 13 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
Mounting
3d_export
free
![mounting bracket](/t/11930644.jpg)
mounting bracket
...mounting plate is the portion of a hinge that attaches to the wood. mounting plates can be used indoors, cabinetry and furniture.
turbosquid
$2
![MOUNTING](/t/13297806.jpg)
MOUNTING
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
![Mounts](/t/13301538.jpg)
Mounts
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
![Mount Fuji](/t/13283919.jpg)
Mount Fuji
...fuji
turbosquid
free 3d model mount fuji for download as obj on turbosquid: 3d models for games, architecture, videos. (1579977)
3d_export
$5
![Headphone mount LR](/t/13049709.jpg)
Headphone mount LR
...headphone mount lr
3dexport
headphone mount l+r
turbosquid
$39
![Mount rainier](/t/13389641.jpg)
Mount rainier
...quid
royalty free 3d model mount rainier for download as fbx on turbosquid: 3d models for games, architecture, videos. (1492586)
turbosquid
$5
![pipe mounting](/t/13242068.jpg)
pipe mounting
...quid
royalty free 3d model pipe mounting for download as obj on turbosquid: 3d models for games, architecture, videos. (1293744)
turbosquid
$3
![Mounting Tires](/t/13457386.jpg)
Mounting Tires
...uid
royalty free 3d model mounting tires for download as fbx on turbosquid: 3d models for games, architecture, videos. (1708511)
3d_export
$5
![Magnetic GoPro Mount](/t/11385909.jpg)
Magnetic GoPro Mount
...pro mount
3dexport
cool magnetic mount for gopro. allows you to mount the camera on flat metal surfaces and get exclusive shots.
turbosquid
$5
![Stone Mount](/t/13279026.jpg)
Stone Mount
...ty free 3d model stone mount for download as ma, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1370306)
4
turbosquid
$9
![Office Chair 4-4](/t/13447765.jpg)
Office Chair 4-4
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$5
![doors- 4](/t/11927333.jpg)
doors- 4
...doors- 4
3dexport
doors 4
3d_export
$5
![hinge 4](/t/11920336.jpg)
hinge 4
...hinge 4
3dexport
hinge 4
3ddd
$1
![Штора №4](/t/605461.jpg)
Штора №4
...штора №4
3ddd
штора №4
3d_export
free
![playstation 4](/t/11423512.jpg)
playstation 4
...playstation 4
3dexport
playstation 4
turbosquid
$1
![re 4-4 electric locomotive](/t/13479488.jpg)
re 4-4 electric locomotive
... free 3d model re 4 4 electric locomotive for download as obj on turbosquid: 3d models for games, architecture, videos. (1707845)
3ddd
$1
![nexus 4](/t/386957.jpg)
nexus 4
...nexus 4
3ddd
lg , телефон
nexus 4
3ddd
$1
![4 Poufs](/t/460335.jpg)
4 Poufs
...4 poufs
3ddd
пуф
4 soft poufs
turbosquid
$12
![Calligraphic Digit 4 Number 4](/t/13397641.jpg)
Calligraphic Digit 4 Number 4
...hic digit 4 number 4 for download as max, obj, fbx, and blend on turbosquid: 3d models for games, architecture, videos. (1389332)
3ddd
$1
![Dauphin 4+](/t/955479.jpg)
Dauphin 4+
...dauphin 4+
3ddd
кресло
dauphin 4+ конференц кресло
Cg
turbosquid
$38
![Cg Woman](/t/13330411.jpg)
Cg Woman
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
$1
![CHD2551GI-CG](/t/673546.jpg)
CHD2551GI-CG
...0 ммhttp://www.visualcomfortlightinglights.com/product/visual-comfort-e-f-chapman-oslo-sconces-chd2551gi-cg.html?page=1
3ddd
free
![Gaggenau CG 290](/t/599698.jpg)
Gaggenau CG 290
...b , варочная панель
gaggenau cg 290 model.
cooking hob, with unwrapped texture for logo.
turbosquid
$20
![CG Rooster Character](/t/13354960.jpg)
CG Rooster Character
...
royalty free 3d model cg rooster character for download as on turbosquid: 3d models for games, architecture, videos. (1675178)
turbosquid
$60
![CG robot -Xtruder](/t/13331778.jpg)
CG robot -Xtruder
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$4
![CG Tron Logo](/t/13444560.jpg)
CG Tron Logo
...el cg tron logo for download as 3ds, obj, fbx, blend, and dae on turbosquid: 3d models for games, architecture, videos. (1279589)
3ddd
$1
![CG 50-2902](/t/972100.jpg)
CG 50-2902
...cg 50-2902
3ddd
christopher guy
max 12, vray
3ddd
$1
![8535/18 CG XU](/t/1003463.jpg)
8535/18 CG XU
...8535/18 cg xu
3ddd
люстра артикул 8535/18 cg xu
высота:60см
диаметр:90см
turbosquid
$30
![CG Celestial model](/t/13405356.jpg)
CG Celestial model
...er guy - celestial 3d model for download as max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1565785)
3d_export
$40
![CG egg 3D Model](/t/46149.jpg)
CG egg 3D Model
...cg egg 3d model
3dexport
egg food eat lighting render realistic
cg egg 3d model jac 36193 3dexport