Thingiverse
miniture shelf by DocBoyales
by Thingiverse
Last crawled date: 3 years, 1 month ago
this is a small shelf i designed. if you are going to mount it in sheet rock you will have to use the spacers. put wall anchors in the sheet rock. mount the spacers on the wall with the screws tight. there is a counter sink area for the screw head to sink into and be flush with the mount. then angle the shelf slide the mounts into the slots and you're done.
it was drawn to be 200mm tall or wide, depending on how you are looking at it. simplify3d shows a printing time of 39 hours with 10percent infill, 1mm nozzle at .32mm layer height.
i would suggest to print it on its side. i use an ender3 so i have no choice, but i have done some shelf brackets in the same fasion as this shelf and printed them on the side and they came out great.
it was drawn to be 200mm tall or wide, depending on how you are looking at it. simplify3d shows a printing time of 39 hours with 10percent infill, 1mm nozzle at .32mm layer height.
i would suggest to print it on its side. i use an ender3 so i have no choice, but i have done some shelf brackets in the same fasion as this shelf and printed them on the side and they came out great.
Similar models
thingiverse
free
Wall mounted ski shelf by JohnnyDanger
...tra sturdy wall mount for your skis. i used some extra long sheet rock screws to secure it to the garage wall. works well so far.
thingiverse
free
Closet Shelf Mounting Hook by socratesfoot
...versions for her at a later date.
2/5/2018 - updated with a less pretty, but more durable version. (use this if you print in pla)
thingiverse
free
Vesa mount spacer 100x100 20mm
...an do around 160x160mm to print the mount. i used a brim but you should be able to print without it if you have good bed adhesion
thingiverse
free
Small Shelf by MarcMan
... the shelves are holding up well without failure. much of the success will be based on the mounting tape used to mount the shelf.
thingiverse
free
HTC Vive Lighthouse Shelf Mount by alexmordue
...ut" to tighten the ball into the mount.
you'll need:
a vive
2 or 3 short screws suitable for screwing through your shelf
thingiverse
free
Xbox Controller Screw-less Wall Mount by driftz240
...e-sided tape, recommend you cover the entirety of the back of the mount with it as i had problems with just a strip on each side.
thingiverse
free
Tablet wall bracket (universal) by redant72
... mounted on opposite side so i can side tablet in and out
you could use four with double sided tape to totally fix tablet to wall
thingiverse
free
Tv Wall Mount Spacer by Paul2015
...ou need. it took about 30 minutes to print each one solid. this is my first post so if you have any problems please let me know.
thingiverse
free
Verizon Fios Remote Desk or Wall Holder by wepollock9
...es on a coffee table. to wall mount you can use a sheet-rock screw; as the design has a bio;t om countersink for that purpose.
thingiverse
free
Wall Mounted Headphone Stand by Arlo_S
...ole size based on what screws you're using. i don't know exactly what screw i used but i believe it was a countersunk #8.
Docboyales
thingiverse
free
hanger and spacer for Eureka Blaze 3-in-1 Swivel Lightweight Stick Vacuum by DocBoyales
...directly on a wall it will need the spacer. if it is going on a board that sticks out from the wall the spacer may not be needed.
thingiverse
free
lampshade and mount, print mount seperate from the shade, pin in place with pieces of filament by DocBoyales
...ilament by docboyales
thingiverse
lampshade and mount, print mount seperate from the shade, pin in place with pieces of filament
thingiverse
free
white board corner by DocBoyales
...white board corner by docboyales
thingiverse
this is a corner for a white board
thingiverse
free
remix of someones remix by DocBoyales
...it a little taller than i would like putting the drive motor a few degrees past 90, but not enough to restrict filament movement.
thingiverse
free
8mm-9mm light strip mount by DocBoyales
...8mm-9mm light strip mount by docboyales
thingiverse
8mm-9mm light strip mount
thingiverse
free
TWISTER VELOCITY STACK by DocBoyales
...twister velocity stack by docboyales
thingiverse
very similar to tornado velocity stack
thingiverse
free
TORNADO VELOCITY STACK by DocBoyales
...ado velocity stack by docboyales
thingiverse
i had a different one on here, but i decided i didnt like it and i could do better.
thingiverse
free
4010 RADAL FAN VELOCITY MULTIPLIER by DocBoyales
...e every fan housing is probably a little different i did not bother with internal mounting parts, i just set mine on and glued it
thingiverse
free
https://www.thingiverse.com/thing:3743471 this is a remake to fit 12oz us cans by DocBoyales
...:3743471 this is a remake to fit 12oz us cans by docboyales
thingiverse
i resized the top of the hole to fit a 12oz us drink can
Miniture
3d_export
$8
toyota corona mark ii 1977
...a car from my youth. could not find a miniture so tried to make it myself... scale...
3d_export
$8
ford-consul coupe 1972
...ford-consul coupe 1972 3dexport could not find a miniture model so made it myself. sorry, forgot to make...
3d_export
$8
ford-taunus 12m turnier 1965
...ford-taunus 12m turnier 1965 3dexport could not find a miniture model so made it myself. scale...
thingiverse
free
dwarf by Nidoten
...dwarf by nidoten thingiverse 3d scanned tabletop miniture from the lord of the rings. not designed by...
thingiverse
free
Dwarf by Nidoten
...dwarf by nidoten thingiverse 3d scanned tabletop miniture from the lord of the rings. not designed by...
thingiverse
free
miniture ender 3 pro by dooley123
...dooley123
thingiverse
miniture ender 3 pro including gcode and stl files gcode for just uploading and printing straight away =-)
thingiverse
free
Star Wars Wizards of the Coast Base by Bandicoot
...adjust this hole. the base is for star wars miniture of wizards of the coast (wotc) models. 2006 lfl...
thingiverse
free
Customizable Lithopane Zoetrope by bbernstone
...having a slot for pictures, to having slots for miniture lithopanes.. but of course you can modify this again...
thingiverse
free
Eye Cu Smile V2 Transparent Face Covering Kit / Clear Mask NanoHack Copper3D Filter by FullPlasticScientist
...than a day under aggressive testing. update 06/11/2020 added miniture filtered usb mask dryer. https://www.thingiverse.com/thing:4644900 proved effective at keeping...
Shelf
3d_export
$19
Celtic Three Drawer Storage Shelf 3D Model
...d section southern enterprises furniture locker chest drawers
celtic three drawer storage shelf 3d model humster3d 72046 3dexport
3d_export
$12
Shelf MAX 2011 3D Model
...ookshelf modern wood art colours furniture livingroom house decoration
shelf max 2011 3d model motionmediaworkshop 70255 3dexport
3d_export
$19
Convexshapes Kitchen Decorations Wine stand 3D Model
...3d model 3dexport kitchen stuff decorations wine cellar stand shelf rack bottle convex 3ds max cinema c4d vray mentalray...
3d_export
$19
Convexshapes Kitchen Decorations Wine shelf 3D Model
...ttle convex 3ds max cinema c4d vray mentalray
convexshapes kitchen decorations wine shelf 3d model convexshapes 69762 3dexport
3d_export
$27
Bathroom shelf 3D Model
...
3dexport
bath storage corner decoration shelf ronnskar shower bathroom hygiene
bathroom shelf 3d model livevertex 77898 3dexport
3d_export
$34
Computer desk 3D Model
...computer desk table furniture interior office design home room shelf box wood high poly 3d model computer desk 3d...
3ddd
$1
Display Cabinet FS
...display cabinet fs 3ddd book shelf ...
3ddd
$1
Kohler Triton® Shelf-back double wristblade lever handle sink faucet with loose-key stops
... смеситель
медицинский (хирургический) смеситель
height 8-7/16"
length 7-5/8"
width 8"
k-7308-5a-cp
3ddd
$1
Decorative shelf -3
... живопись , картина
decorative shelf ,,, saved max 2015, 2012, fbx
3ddd
$1
Cosmo Ice Bear Shelf
... bear
полка ice bear shelf
размеры: 100х160х45 cm.
70 000 polygons, turbosooth iteration = 2