Thingiverse
miNimiNi - homemade 3D printer by intommy
by Thingiverse
Last crawled date: 3 years, 5 months ago
October 12, 2020 / 12.10. 2020
CZ: upraven drzak osy Z a motoru Z - V3, novy Fusion 360 a Step soubor
EN: modified Z-axis and Z motor holder - variant V3 , new Fusion 360 and Step file
October 7, 2020 / 7. rijen 2020
CZ: Pridal jsem drzak pro endstop (aktualne pouzivam na Y, na Z mam pindu) na hlazene tyci.
tento design: https://www.thingiverse.com/thing:503645
EN: I added an endstop holder (currently using Y, I have a pinda V2 on Z) on a smooth rod.
this design: https://www.thingiverse.com/thing:503645
Novy F360 soubor a STEP soubor (V6)
https://youtu.be/vZ0OwfZ3gSwhttps://youtu.be/gimYTHxXewQ
Display mount:
Ender 3 and 3030 https://www.thingiverse.com/thing:4607860
TFT24:https://www.thingiverse.com/thing:4605482https://www.thingiverse.com/thing:4231367
PSU holder:https://www.thingiverse.com/thing:4604666
CZ:
Moje prvni doma vyrobena tiskarna.
Tiskarnu jsem vicemene puvodne planoval sestavit z dilu, ktere se doma zustaly valet po upgrade me tiskarny Ender 3.
Elektroniku jsem pouzil prave z Ender 3,
zakladni deska 1.1.4
puvodni displej z Ender 3 jsem nakonec nahradil za TFT24 ktery tady taky lezel a nemel jsem pro nej aktualne pouziti
Zdroj S180-12, 12V, 15A
Aktualne vyhrivana podlozka 100x100 mm (mam sice jinou znacku, ale je to to stejne)https://www.aliexpress.com/item/32729734950.html
vlozena do plastoveho ramu z ABS 120x120 mm, prekryta 2mm sklem se zrcadlovou PET folii.
Hotend je cinsky klon E3D V6 s tryskou 0.4
Extruder MK3s je vytisten z dilu stazenych zde:https://www.prusa3d.cz/tisknutelna-vylepseni-tiskarny/
a sestaven podle https://help.prusa3d.com/cs/guide/5-sestaveni-osy-e-extruder_28537
Profily 3030 zakoupeny na ehlinik.cz v rozmerem 4x 280 mm a 3x 230 mm
Spousta M4 sroubu a matek, kladivkove matky do profilu jsem si tiskl a vlozil do nich M4 matky
4x step motor Nema 17 ruzneho puvodu,
2x trapezova tyc a trapezova matice T8x2 (je mozno pouzit cokoliv co prijde pod ruku) v delce 256 mm
6x hlazena tyc 8mm
1x 15 cm zavitova tyc pro drzak filamentu
BTT TFT24 1.1 (nebo jakykoliv jiny displej)
Pro tento displej jsem pouzil tento mount: https://www.thingiverse.com/thing:4231367 drzak pro 3030 je pak v archivu TFT ve dvou provedenich zde. nebo v remixech u https://www.thingiverse.com/thing:4231367
Pouzity tiskovy material
cerveny ABS neznameho puvodu :) (240/90)
bila/natural ASA Aurapol prebeh (260/90)
cerna/oranzova (PETG Nebula)
PLA (zlata - ST PLA Creality a seda Gembird PLA+) - pouzito na loziska
vse vytisteno na tiskarne Ender 3
Prilozen step soubor a Fusion 360 soubor.
Vsechny STL soubory jsou v archivu (rar), pripadne se daji exportovat z Fusionu. Spousta dilu je predelanych dle potreby a rozhodne nemusi byt finalni.
Berte prosim do uvahy, ze jsem pred sestavenim tiskarny nemel vsechny potrebne znalosti a vse jsem se ucil za pochodu, stejne tak je mi jasne ze muze existovat elegantnejsi reseni necoho co jsem udelal takto.
Pripadne dotazy smerujte do comments
Jak rika Majkl... Happy 3d printing :)
EN:
My first home made printer.
More or less, I originally planned to assemble the printer from the parts that remained at home after the upgrade of my Ender 3 printer.
I used the electronics from Ender 3,
motherboard 1.1.4
I finally replaced the original display from Ender 3 with TFT24, which also lay here and I had no current use for it.
Power supply S180-12, 12V, 15A
Currently heated bed 100x100 mm (I have a different brand, but it's the same)https://www.aliexpress.com/item/32729734950.html
inserted into a plastic frame made of ABS 120x120 mm, covered with 2 mm glass with mirror PET foil.
Hotend is a Chinese clone of E3D V6 with a 0.4 nozzle
Extruder MK3s is built according to MK3s:https://www.prusa3d.cz/tisknutelna-vylepseni-tiskarny/
and https://help.prusa3d.com/cs/guide/5-sestaveni-osy-e-extruder_28537
Profiles 3030 purchased on ehlinik.cz in dimensions 4x 280 mm and 3x 230 mm
I use a lot of M4 screws and nuts, printed hammer nuts into the profile and inserted M4 nuts into them
4x stepper motor Nema 17 different types/brands,
2x trapez rod and trapez nut T8x2 (it is possible to use anything that comes under hand) in the length of 256 mm
6x smooth rod 8mm
1x 15 cm threaded rod for filament holder
BTT TFT24 1.1 (or any other display)
For this display I used this mount: https://www.thingiverse.com/thing:4231367 the holder for 3030 is then in the TFT archive in two versions here. or in remixes at https://www.thingiverse.com/thing:4231367
Used printing material
red ABS of unknown origin :) (240/90)
white / natural ASA Aurapol (color transition during production) (260/90)
black / orange (PETG Nebula)
PLA (gold - ST PLA Creality and gray Gembird PLA +) - used on bearings
all printed on Ender 3 printers
Step file and Fusion 360 file included.
All STL files are in the archive (rar), or they can be exported from Fusion. Lots of parts are reworked as needed and definitely don't have to be final.
Please keep in mind that I did not have all the necessary knowledge before setting up the printer and I learned everything on the go, as well as it is clear to me that there may be a more elegant solution to something I did like this.
If you have any questions, please direct them to the comments
As Michael says ... Happy 3d printing :)
CZ: upraven drzak osy Z a motoru Z - V3, novy Fusion 360 a Step soubor
EN: modified Z-axis and Z motor holder - variant V3 , new Fusion 360 and Step file
October 7, 2020 / 7. rijen 2020
CZ: Pridal jsem drzak pro endstop (aktualne pouzivam na Y, na Z mam pindu) na hlazene tyci.
tento design: https://www.thingiverse.com/thing:503645
EN: I added an endstop holder (currently using Y, I have a pinda V2 on Z) on a smooth rod.
this design: https://www.thingiverse.com/thing:503645
Novy F360 soubor a STEP soubor (V6)
https://youtu.be/vZ0OwfZ3gSwhttps://youtu.be/gimYTHxXewQ
Display mount:
Ender 3 and 3030 https://www.thingiverse.com/thing:4607860
TFT24:https://www.thingiverse.com/thing:4605482https://www.thingiverse.com/thing:4231367
PSU holder:https://www.thingiverse.com/thing:4604666
CZ:
Moje prvni doma vyrobena tiskarna.
Tiskarnu jsem vicemene puvodne planoval sestavit z dilu, ktere se doma zustaly valet po upgrade me tiskarny Ender 3.
Elektroniku jsem pouzil prave z Ender 3,
zakladni deska 1.1.4
puvodni displej z Ender 3 jsem nakonec nahradil za TFT24 ktery tady taky lezel a nemel jsem pro nej aktualne pouziti
Zdroj S180-12, 12V, 15A
Aktualne vyhrivana podlozka 100x100 mm (mam sice jinou znacku, ale je to to stejne)https://www.aliexpress.com/item/32729734950.html
vlozena do plastoveho ramu z ABS 120x120 mm, prekryta 2mm sklem se zrcadlovou PET folii.
Hotend je cinsky klon E3D V6 s tryskou 0.4
Extruder MK3s je vytisten z dilu stazenych zde:https://www.prusa3d.cz/tisknutelna-vylepseni-tiskarny/
a sestaven podle https://help.prusa3d.com/cs/guide/5-sestaveni-osy-e-extruder_28537
Profily 3030 zakoupeny na ehlinik.cz v rozmerem 4x 280 mm a 3x 230 mm
Spousta M4 sroubu a matek, kladivkove matky do profilu jsem si tiskl a vlozil do nich M4 matky
4x step motor Nema 17 ruzneho puvodu,
2x trapezova tyc a trapezova matice T8x2 (je mozno pouzit cokoliv co prijde pod ruku) v delce 256 mm
6x hlazena tyc 8mm
1x 15 cm zavitova tyc pro drzak filamentu
BTT TFT24 1.1 (nebo jakykoliv jiny displej)
Pro tento displej jsem pouzil tento mount: https://www.thingiverse.com/thing:4231367 drzak pro 3030 je pak v archivu TFT ve dvou provedenich zde. nebo v remixech u https://www.thingiverse.com/thing:4231367
Pouzity tiskovy material
cerveny ABS neznameho puvodu :) (240/90)
bila/natural ASA Aurapol prebeh (260/90)
cerna/oranzova (PETG Nebula)
PLA (zlata - ST PLA Creality a seda Gembird PLA+) - pouzito na loziska
vse vytisteno na tiskarne Ender 3
Prilozen step soubor a Fusion 360 soubor.
Vsechny STL soubory jsou v archivu (rar), pripadne se daji exportovat z Fusionu. Spousta dilu je predelanych dle potreby a rozhodne nemusi byt finalni.
Berte prosim do uvahy, ze jsem pred sestavenim tiskarny nemel vsechny potrebne znalosti a vse jsem se ucil za pochodu, stejne tak je mi jasne ze muze existovat elegantnejsi reseni necoho co jsem udelal takto.
Pripadne dotazy smerujte do comments
Jak rika Majkl... Happy 3d printing :)
EN:
My first home made printer.
More or less, I originally planned to assemble the printer from the parts that remained at home after the upgrade of my Ender 3 printer.
I used the electronics from Ender 3,
motherboard 1.1.4
I finally replaced the original display from Ender 3 with TFT24, which also lay here and I had no current use for it.
Power supply S180-12, 12V, 15A
Currently heated bed 100x100 mm (I have a different brand, but it's the same)https://www.aliexpress.com/item/32729734950.html
inserted into a plastic frame made of ABS 120x120 mm, covered with 2 mm glass with mirror PET foil.
Hotend is a Chinese clone of E3D V6 with a 0.4 nozzle
Extruder MK3s is built according to MK3s:https://www.prusa3d.cz/tisknutelna-vylepseni-tiskarny/
and https://help.prusa3d.com/cs/guide/5-sestaveni-osy-e-extruder_28537
Profiles 3030 purchased on ehlinik.cz in dimensions 4x 280 mm and 3x 230 mm
I use a lot of M4 screws and nuts, printed hammer nuts into the profile and inserted M4 nuts into them
4x stepper motor Nema 17 different types/brands,
2x trapez rod and trapez nut T8x2 (it is possible to use anything that comes under hand) in the length of 256 mm
6x smooth rod 8mm
1x 15 cm threaded rod for filament holder
BTT TFT24 1.1 (or any other display)
For this display I used this mount: https://www.thingiverse.com/thing:4231367 the holder for 3030 is then in the TFT archive in two versions here. or in remixes at https://www.thingiverse.com/thing:4231367
Used printing material
red ABS of unknown origin :) (240/90)
white / natural ASA Aurapol (color transition during production) (260/90)
black / orange (PETG Nebula)
PLA (gold - ST PLA Creality and gray Gembird PLA +) - used on bearings
all printed on Ender 3 printers
Step file and Fusion 360 file included.
All STL files are in the archive (rar), or they can be exported from Fusion. Lots of parts are reworked as needed and definitely don't have to be final.
Please keep in mind that I did not have all the necessary knowledge before setting up the printer and I learned everything on the go, as well as it is clear to me that there may be a more elegant solution to something I did like this.
If you have any questions, please direct them to the comments
As Michael says ... Happy 3d printing :)
Similar models
thingiverse
free
Ender 3 display mount for 3030 extrusion by intommy
...ay from ender 3 and used that one.
asa aurapol 260/90 (color transition during production), profile slicer prusa mk3s 0.2 quality
thingiverse
free
Bigtreetech TFT24 v1.1 Angled case for ender 3 by guntR
...igtreetech tft24 v1.1 angled case from skedux (https://www.thingiverse.com/thing:3966593) that fits the ender 3 aluminum profile.
thingiverse
free
Waterproof Hatch for RCLifeOn's RC Airboat and PropHangin Hatch by Brejchovic
...rboat tisknut: https://www.thingiverse.com/thing:2989465
voděodolné víko od prophangin: https://www.thingiverse.com/thing:3068383
thingiverse
free
Bigtreetech TFT24 Ender 3 Mount by blaablaaguy, version for mounting on the left side of the printer.
...g sockets do not allow to mount it on the left side of the printer ...
so it had to be redone and something like that came out ;)
thingiverse
free
Witcher Medallion Ender 3 Pro QR cover by Roguishdrummer
...sion of these things: https://www.thingiverse.com/thing:3317795 and https://www.thingiverse.com/thing:845187
made in fusion 360.
thingiverse
free
Staffa nema17 48 mm estruso 3030 3 by Albertop
...
staffa nema 17 per estruso 3030
altro https://www.thingiverse.com/thing:2755114
altro https://www.thingiverse.com/thing:2755366
thingiverse
free
Sovol SV01 Z motor mount by bartolomeus
...mix of a design for the ender 3, however that design does not work on the sv01. source: https://www.thingiverse.com/thing:2959991
thingiverse
free
Cable chain Z Rebel2 by jarano
...ky spydrcz.
pouze z osa.
použité některé díly z obou projektů a upravené aby pasovaly na mojí tiskárnu.
článek řetězu je původní.
thingiverse
free
Holder for TFT24 and 3030 extrusion. by intommy
...e nut on the other side. when using a wood screw, i wasn't sure it would hold.
extended version: https://youtu.be/b4pey-6zgue
thingiverse
free
Prusa i3 - Z EndStop and cable holder by Sakul
... držák stavitelného šroubu pro přesné doladění osy z.
další info ze stavby zde:http://forum.sakul.cz/viewtopic.php?f=12&t=985
Minimini
Intommy
thingiverse
free
S-180-12 PSU cover by intommy
...ver by intommy
thingiverse
power supply cover s-180-12. file in fusion 360 format available for possible modifications as needed
thingiverse
free
Remix LED holder for MK3s frame by intommy
...der for mk3s frame by intommy
thingiverse
my old led light from ender 3, i just re-made holder for frame. now its fit to mk3s :)
thingiverse
free
S-180-12 PSU mount (3030 extrusion) by intommy
... extrusion) by intommy
thingiverse
simple holder for psu s180-12 on 3030 extrusion
(psu dimension 43x99x196)
f360 and step file.
thingiverse
free
Prusa Enclosure Top Corners - Extensions - Ikea Lack table (+10cm) by intommy
...k table (+10cm) by intommy
thingiverse
v4 - some repaired parts
extension of the original upper parts by 10 cm
stp file included
thingiverse
free
Holder for TFT24 and 3030 extrusion. by intommy
...e nut on the other side. when using a wood screw, i wasn't sure it would hold.
extended version: https://youtu.be/b4pey-6zgue
thingiverse
free
VW Corrado G60 logo front grill - one part by intommy
...i urceno ke komercnimu uziti.
combined into one part. printed from asa black
not for commercial use.
https://youtu.be/cmppyfok-ei
thingiverse
free
BTT TFT35 display box for mini clone by intommy
...nsition, printed on my clone mini 0,25draft original profile for prusa mini.
some m3, m4 screws used
https://youtu.be/5rjqoe0hhpu
thingiverse
free
Ender 3 display mount for 3030 extrusion by intommy
...ay from ender 3 and used that one.
asa aurapol 260/90 (color transition during production), profile slicer prusa mk3s 0.2 quality
thingiverse
free
Electronic box for SKR mini E3 / Creality Melzi / rPi (optional) box for 2020/3030 extrusion by intommy
...020
electronic box skr mini e3 / creality melzi / rpi (optional) box for 2020/3030 extrusion.
4x m3-40
stp and f360 file included
thingiverse
free
Simple 2032 battery holder with LED (aka Tea light) by intommy
...nkcni.
stromecek naleznete zde https://www.thingiverse.com/thing:4003345
https://youtu.be/czmlebmynhqhttps://youtu.be/wu50j3rk_bc
Homemade
turbosquid
$14
Homemade Cup
... free 3d model homemade cup for download as max, fbx, and obj on turbosquid: 3d models for games, architecture, videos. (1530055)
turbosquid
$12
Homemade Bread
...ree 3d model homemade bread for download as max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1593685)
turbosquid
$10
Homemade Based Gun
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$4
Homemade Gaming Table
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$59
Electric Homemade Morgenstern
... morgenstern for download as max, max, max, max, fbx, and obj on turbosquid: 3d models for games, architecture, videos. (1708709)
turbosquid
$15
Homemade Chocolates(8 types)
...e 3d model homemade chocolates(8 types) for download as blend on turbosquid: 3d models for games, architecture, videos. (1214642)
turbosquid
$5
Homemade Axe (High Poly)
...ty free 3d model homemade axe (high poly) for download as obj on turbosquid: 3d models for games, architecture, videos. (1209323)
3d_export
$10
homemade knife
...nife
3dexport
all textures in the png extension (2k, pbr). number of polygons 6980. file formats: fbx, obj, stl, max, mb, blend.
turbosquid
$15
Homemade metal sauna stove
...made metal sauna stove for download as max, obj, fbx, and dwg on turbosquid: 3d models for games, architecture, videos. (1577773)
turbosquid
$9
Homemade guide screw module
...e guide screw module for download as 3ds, ige, obj, and sldas on turbosquid: 3d models for games, architecture, videos. (1224566)
Printer
archibase_planet
free
Printer
...inter
archibase planet
printer laser printer pc equipment
printer n120614 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Printer
...rchibase planet
laser printer office equipment computer equipment
printer - 3d model (*.gsm+*.3ds) for interior 3d visualization.
turbosquid
$100
Printer
...er
turbosquid
royalty free 3d model printer for download as on turbosquid: 3d models for games, architecture, videos. (1487819)
turbosquid
$3
Printer
...turbosquid
royalty free 3d model printer for download as max on turbosquid: 3d models for games, architecture, videos. (1670230)
turbosquid
$1
printer
...turbosquid
royalty free 3d model printer for download as max on turbosquid: 3d models for games, architecture, videos. (1595546)
turbosquid
$1
printer
...turbosquid
royalty free 3d model printer for download as max on turbosquid: 3d models for games, architecture, videos. (1595105)
turbosquid
$10
Printer
...id
royalty free 3d model printer for download as max and 3dm on turbosquid: 3d models for games, architecture, videos. (1607146)
turbosquid
$7
Printer
...royalty free 3d model printer for download as ma, ma, and obj on turbosquid: 3d models for games, architecture, videos. (1644580)
turbosquid
$30
Printer
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$20
Printer
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.