Thingiverse
Minimalistic Raspberry Mount 40mm Fan Free GPIO by staticcsonka
by Thingiverse
Last crawled date: 4 years, 3 months ago
Ive printed it in 0.2
You pretty sure have to thrill up the holes , so you need a 3.5 mm thriller .
For installing the nuts into its place i am doing in that way that i put a nut onto a screw , then warm it with fire and push it into the mount .
Also needed
for a 40x10mm Fan :
M3x20 4pcs
M3x15 4pcs
8 Nuts M3
8 Washers M3
for a 40x20mm Fan
M3x25 4pcs
M3x15 4pcs
8 Nuts M3
8 Washers M3
you can mount the raspberry everywhere with 4 screws which i do not recommend since you should know which screws depending on your destination :)
You pretty sure have to thrill up the holes , so you need a 3.5 mm thriller .
For installing the nuts into its place i am doing in that way that i put a nut onto a screw , then warm it with fire and push it into the mount .
Also needed
for a 40x10mm Fan :
M3x20 4pcs
M3x15 4pcs
8 Nuts M3
8 Washers M3
for a 40x20mm Fan
M3x25 4pcs
M3x15 4pcs
8 Nuts M3
8 Washers M3
you can mount the raspberry everywhere with 4 screws which i do not recommend since you should know which screws depending on your destination :)