Thingiverse
Minimal/Fast print Raspberry PI enclosure for Ender3 and variants by decoder
by Thingiverse
Last crawled date: 4 years, 7 months ago
This is a minimal Raspberry Pi 2/3 enclosure that can print in less than one hour (0.3 layer height at 60 mm/s).
You can mount it on Ender 3 or any similar printer.
Requires 4x M3 x 7mm Phillips self tapping screws.
You can mount it on Ender 3 or any similar printer.
Requires 4x M3 x 7mm Phillips self tapping screws.