Thingiverse
Minimal Chainguide ISCG 05 by Daniele742
by Thingiverse
Last crawled date: 4 years, 9 months ago
I needed a chain guide for my bike so here it is. I started from the technical draw of the ISCG05 standard and try to design the backplate as minimal as possible. I used 2 countersunk bolts (M6x12) to link the plate to the frame.
The upper guide was attached to the plate with a hex bolt M6x20 and a nut behind the backplate in a socket. Behind the guide there is a little tooth to avoid its rotation.
All the two pieces can be printed with just a little need of supports.
The upper guide was attached to the plate with a hex bolt M6x20 and a nut behind the backplate in a socket. Behind the guide there is a little tooth to avoid its rotation.
All the two pieces can be printed with just a little need of supports.