Thingiverse
Mini toothless herb grinder with 5x2mm magnet holes
by Thingiverse
Last crawled date: 5 years, 3 months ago
Hello,
with this print i wanted to minimize the amount of filament used, add magnets, and set a proper distance between grinding plates.
The main body's size is simillar to my favourite grinder.
The size is roughly 1/3rd of the original, plus it prints from one file.
With my settings it's 3h38m
Magnets are supposed to be pressure fit, but you might need to sand the holes open a little.
If you sand too much, a drop of super-glue will do the trick.
with this print i wanted to minimize the amount of filament used, add magnets, and set a proper distance between grinding plates.
The main body's size is simillar to my favourite grinder.
The size is roughly 1/3rd of the original, plus it prints from one file.
With my settings it's 3h38m
Magnets are supposed to be pressure fit, but you might need to sand the holes open a little.
If you sand too much, a drop of super-glue will do the trick.