Thingiverse
Mini Talon VTOL Mounts for 14mm Carbon Fibre Tube by enginewu
by Thingiverse
Last crawled date: 3 years, 5 months ago
I designed these mounts to attach the vtol motors' arms to the wings of the Mini Talon. It can lock the 14mm carbon fibre tube to those tubes inside Talon's wings.
16 M3*30 screws and 16 M3 nuts are required, and each of these need to print twice.
16 M3*30 screws and 16 M3 nuts are required, and each of these need to print twice.
Similar models
thingiverse
free
14mm tube to dji flamewheel mount by landsharkxx
...is modeled after the tbs endurance upgrade. its now 3d printable.you can use the turnigy talon carbon fiber tubes from hobbyking.
thingiverse
free
14mm tube ESC motor mount (Plush 30A ESC) by tophe75
...sc i use.
just put the esc on the mount and the hole thing on the carbon boom and just strap it down with a couple of zip-ties.
thingiverse
free
Quadplane Arm Wing Mount by Brodo78
... make a quadplane.
it has a large base to distribute the load over a greater surface area.
the bolt holes are made for ~m3 bolts.
thingiverse
free
Turnigy Talon Quad Copter Motor Mounts by stargatian
...ng holes, should fit most small motors.
*update: i have reinforced the top clamping section to make it significantly sturdier.
thingiverse
free
Mini Talon Motor Mount by JAG_FPV
...ngiverse
this is a reinforced motor mount for the mini talon for cobra sunnysky and ntm motors it is 6mm thick and uses m3 nuts.
thingiverse
free
Mini Talon V2 Motor Mount by shannonmbaker
...ngiverse
replacement motor mount for the new mini talon v2.
34mm hole pattern mount to suit sunny sky (x2216).
m3 nuts embedded.
thingiverse
free
Mini Talon Wing Skid by csrf
...mini talon wing skid by csrf
thingiverse
simple wing skid for x-uav mini talon.
thingiverse
free
Quadcopter Motor Mount by yconst
...14mm-19mm mounting pattern. it fits around a 14mm round tube. it can be used with 3k carbon fiber tubes.
more projects on my blog
thingiverse
free
Matek-F722-wing mounting plate (Mini Talon cradle by Vortecks)
...t controller.
http://www.mateksys.com/?portfolio=f722-wing
original design by vortecks: https://www.thingiverse.com/thing:1860720
thingiverse
free
Mini Talon wing connector by Papsi
...mini talon wing connector by papsi
thingiverse
mini talon wing connector incl. 6-pin connector
Vtol
thingiverse
free
Nightshade VTOL
...nightshade vtol
thingiverse
nightshade vtol
thingiverse
free
Warrior VTOL
...warrior vtol
thingiverse
warrior vtol proxy
thingiverse
free
SciFi VTOL by smight
...scifi vtol by smight
thingiverse
scifi vtol
thingiverse
free
VTOL transport by smight
...vtol transport by smight
thingiverse
vtol transport
thingiverse
free
missle VTOL by smight
...missle vtol by smight
thingiverse
missle vtol
thingiverse
free
Clan VTOL by smight
...clan vtol by smight
thingiverse
clan vtol ...
thingiverse
free
Scout VTOL by smight
...scout vtol by smight
thingiverse
scout vtol
thingiverse
free
Warrior Attack VTOL
...warrior attack vtol
thingiverse
warrior attack vtol, two models
thingiverse
free
Vectored thrust VTOL by smight
...vectored thrust vtol by smight
thingiverse
vectored thrust vtol
thingiverse
free
VTOL transport 2 by smight
...vtol transport 2 by smight
thingiverse
vtol transport 2
Fibre
thingiverse
free
twisted fibres by kasraoui
...twisted fibres by kasraoui
thingiverse
twisted fibres with catia surface
by kasraoui mohamed hedi
thingiverse
free
Fibre Organiser by UoBQuantumMatter
...tion in almost any orientation.
this was designed and is used by the cold atoms research group at the university of birmingham.
thingiverse
free
Milnor fibre of the node. by mmarco
...e node. by mmarco
thingiverse
this is the milnor fibre of a nodal singularity. or, if you prefear, the intersection of two tori.
thingiverse
free
Carbon Fibre Molecules
...there are three files. one just has the cad mesh, another has sla supports and the third is a single layer for multiple printing.
thingiverse
free
Micro:Pixel Edge to Fibre-optic adapter by furbrain
...-optic adapter by furbrain
thingiverse
an adapter for the micro:pixel edge, which allows you to connect fibre optic cable to it.
thingiverse
free
Stackable fibre organiser/protector by UoBQuantumMatter
...print as many "middle" pieces as you need to house all of your fibres then top it all off with a "lid" piece.
thingiverse
free
SLA. NeoPixel - Lightguide Fibre by PolyVinalDistillate
... nph.stl. seal together with more clear printer resin and laser pointer. aim is weatherproof seal, so get a good amount in there!
thingiverse
free
Milnor fibre of the cusp. by mmarco
...cusp. by mmarco
thingiverse
this is the milnor fiber of the simple cusp singularity. notice that the boundary is a trefoil knot.
thingiverse
free
circular loom for bast fibre
...to) as they promise to be more flexibles and smooth.
i printed it using an ender 3 pro and cura with 20% infill and 0.28 z pitch.
thingiverse
free
RGB Led Strip to fibre-optic cable by furbrain
...strip 12.8mm wide and 3.2mm height. the fibre-optic cable is 2.9mm in diameter.
these parameters can be adjusted in the scad file
Talon
thingiverse
free
Talon by Devari
...tar citizen website by cloud imperium games. the scale is approximately 1:1500 and the ship is 0.5 inches in length when printed.
thingiverse
free
talon claw stand
...talon claw stand
thingiverse
just a stand for a talon claw remixed from slugs talon mag
thingiverse
free
Talon Cap by FRCRobotics3735
...talon cap by frcrobotics3735
thingiverse
team 3735 talon cap
thingiverse
free
Talon shelf by Mclouds4335
...talon shelf by mclouds4335
thingiverse
a very basic shelf to stack talons.
thingiverse
free
Talon Throwing knife
...talon throwing knife
thingiverse
a slight redesign of the throwing daggers carried by the talon assassins of the court of owls.
thingiverse
free
Mini Talon Stand by Papsi
...mini talon stand by papsi
thingiverse
stand for the
mini talon
thingiverse
free
Nano Talon FC Support
...nano talon fc support
thingiverse
nano talon fc support
thingiverse
free
hell talon - chaos flyer
...hell talon - chaos flyer
thingiverse
hell talon - chaos flyer
thingiverse
free
FRC Talon Cap by FRCRobotics3735
...frc talon cap by frcrobotics3735
thingiverse
team 3735 talon cap
thingiverse
free
Widowmaker Talon Arm by mgtsu
...widowmaker talon arm by mgtsu
thingiverse
widowmaker talon arm raw file.
14Mm
thingiverse
free
17mm+ to 14mm-
...17mm+ to 14mm-
thingiverse
17mm+ (f) to 14mm- (m) thread adapter.
thingiverse
free
Airsoft 14mm to 14mm suppressor barrel extention by Willrus
...airsoft 14mm to 14mm suppressor barrel extention by willrus
thingiverse
an airsoft 14mm to 14mm suppressor barrel extension
thingiverse
free
14mm Wench by kaylabell
...14mm wench by kaylabell
thingiverse
14mm wench
thingiverse
free
14mm Bearing Pulley
...14mm bearing pulley
thingiverse
14mm bearing pulley x4
thingiverse
free
Dynavap 14mm adapter
...dynavap 14mm adapter
thingiverse
14mm bowl adapter for dynavap to be used in a water piece.
thingiverse
free
Phone stand (14mm)
...ne stand (14mm)
thingiverse
phone stand.
remix of excellent work of goaftens and avsbandit.
maximun thickness of the phone 14mm.
thingiverse
free
18mm to 14mm bowl adapter
...18mm to 14mm bowl adapter
thingiverse
simple 18mm to 14mm adapter for bowls.
thingiverse
free
WoundMarker-14mm by Denbrough
...ugh
thingiverse
remix from simple woundmarker.
this will fit a 14mm die, they are a little bit bigger as i prefer them that way.
thingiverse
free
Airsoft silencer 14mm CCW
...airsoft silencer 14mm ccw
thingiverse
14mm ccw thread silencer/supressor for airsoft only.
thingiverse
free
Whip to 14mm Adapter by Darthvaper
...whip to 14mm adapter by darthvaper
thingiverse
this is a whip to 14mm adapter for all your vaporization needs.
Carbon
thingiverse
free
carbonate by Johnwill
...carbonate by johnwill
thingiverse
carbon 3d printing test print out big
thingiverse
free
carbon atom by TECHB
...carbon atom by techb
thingiverse
carbon atom
thingiverse
free
Carbon Atom by spuntosoft
...carbon atom by spuntosoft
thingiverse
carbon atom
thingiverse
free
Carbon Filter by katzejk
...carbon filter by katzejk
thingiverse
carbon filter 14,5
thingiverse
free
Carbon Nanobelt by senda
...carbon nanobelt by senda
thingiverse
carbon nanobelt
i made this using winmostar.https://winmostar.com/
thingiverse
free
Antena Carbon - deDrones
...s.es/carbon/
y tambien puedes comprar estas piezas y los kits completos de color enhttps://dedrones.es/product-tag/carbon-extras/
thingiverse
free
Carbon Dioxyde Molecule by The_Hacker
...the carbon atom.
for the atom of oxygen print it also two times for the both sides.
and for the carbon atom print it just 1 time.
thingiverse
free
Carbon Nanotube by Digi-Kitsamus
...carbon nanotube by digi-kitsamus
thingiverse
3d printed carbon nanotube
thingiverse
free
Activated Carbon Sploof by ThisWasntTaken
...p with the ring on top. then fill with activated carbon.
you can buy activated carbon in most pet stores in the aquarium section.
thingiverse
free
Carbon Filter by RestlessNZ
...ge. used aluminium mesh from bug screen door to line inside and keep activated carbon in place. made to fit 100mmm high flow fan.
Tube
thingiverse
free
tubes by
...tubes by
thingiverse
tube time
thingiverse
free
Edrio Two Tubes (Tubes) by Sidejoebob
...edrio two tubes (tubes) by sidejoebob
thingiverse
tube for the edrio two tubes helmet
thingiverse
free
Tube Racks
...tube racks
thingiverse
tube racks for 15ml & 50ml falcon tubes and 20mm round-bottom tubes
thingiverse
free
A tube squeezer for aluminum tubes by joergkrause
...rinted with pla. no support required. suitable for tubes up to 50mm
update 03.07.2018 better version uploadet. tube squeezer2.stl
thingiverse
free
Tube by williandb
...tube by williandb
thingiverse
tube
thingiverse
free
tube by shvanmajd
...tube by shvanmajd
thingiverse
tube
thingiverse
free
Tube by vovkachuk
...tube by vovkachuk
thingiverse
tube
thingiverse
free
tube by baramon
...tube by baramon
thingiverse
tube
thingiverse
free
Sliding tube cap or tube foot for 0.85" OD tube by DBQGrips
...f a tube leg to assist in sliding across the floor.
this was designed for 0.85" od tube but can be scaled for similar sizes.
thingiverse
free
Tubing straightener (4,8mm tubes)
... brake lines for example).
all you need is 8x 608 ball bearing, 8x m8 screw and 8x m8 nut.
print list:
2x body
8x roller
1x shims
Mini
thingiverse
free
mini castle mini mini golf by EdisonM
...mini castle mini mini golf by edisonm
thingiverse
play able with ball and putter in the "mini mini golf" model
thingiverse
free
Mini Clothesline - Mini Tendal
...mini clothesline - mini tendal
thingiverse
mini clothesline
mini tendal
thingiverse
free
mini mini golf by EdisonM
...mini mini golf by edisonm
thingiverse
actually playable mini mini golf course with putter and ball
thingiverse
free
Mini Schleuder / Mini Slingshot by Ju5tMak3
...mini schleuder / mini slingshot by ju5tmak3
thingiverse
mini schleuder / mini slingshot
have fun
thingiverse
free
mini bomba (mini pump) by neemiasmiranda
...mini bomba (mini pump) by neemiasmiranda
thingiverse
mini bomba
thingiverse
free
MINI by shteffs
...mini by shteffs
thingiverse
mini
thingiverse
free
Mini wrist, Mini poignet by Aleoduc74
...mini wrist, mini poignet by aleoduc74
thingiverse
mini poignet pour vitre ou petit meuble.
thingiverse
free
Mini Bat
...mini bat
thingiverse
mini bats.
thingiverse
free
Mini-Windeisen
...mini-windeisen
thingiverse
mini-windeisen
thingiverse
free
Mini cadeira
...mini cadeira
thingiverse
mini cadeira
Mounts
thingiverse
free
Pen Mount on BLTouch mount by jetspot
...pen mount on bltouch mount by jetspot
thingiverse
pen mount on bltouch mount
thingiverse
free
RAM Mount, Mount by seanmclean
...ram mount, mount by seanmclean
thingiverse
bridging plate to attach ram mount to yamaha 242, for chartplotter placement.
thingiverse
free
Mount for mount for Garmin GPS by GNOBLIN
...you can use this mount for prevent rotation simple mount around hendelbars.
d handelbar 31.8mm
use m3 screw and din 16903 plug.
thingiverse
free
Permanent mount for Modular Mounting System by WIR14
...permanent mount for modular mounting system by wir14
thingiverse
permanent mount for modular mounting system.
thingiverse
free
Gopro Mount and antenna mount by SuperYoyo
...gopro mount and antenna mount by superyoyo
thingiverse
cut the carbon platform to pass the gopro mount and enjoy !
thingiverse
free
Hexagon Mount for 50mm Mount (Sparkcube) by Draman
...for 50mm mount (sparkcube) by draman
thingiverse
hexagon mount remix from skimmys hotend-mount for sparkcube or other 50mm-mount
thingiverse
free
mount by gixster
...mount by gixster
thingiverse
custom mount
thingiverse
free
Mount by Matrxi999
...mount by matrxi999
thingiverse
shelf mount
thingiverse
free
Motor mount
...motor mount
thingiverse
motor mount
thingiverse
free
GoPro Mount
...gopro mount
thingiverse
gopro mount