Thingiverse
Mini Talon Spar Support brace by johanhoahm
by Thingiverse
Last crawled date: 4 years, 6 months ago
the stock wood brace for wing spar is quite weak, if you hit your wing, definately it will break.
that happen to me, so i design this to secure my wing spar.
cut a bit of your foam so the brace will sit flat on your body.
print in ABS is recomended, but PLA will work.
try to dry fit first because the design have specific curve, you'll have a bad time if glue wrong direction.
also, when gluing, make sure you can fit the spar through both of the brace.
that happen to me, so i design this to secure my wing spar.
cut a bit of your foam so the brace will sit flat on your body.
print in ABS is recomended, but PLA will work.
try to dry fit first because the design have specific curve, you'll have a bad time if glue wrong direction.
also, when gluing, make sure you can fit the spar through both of the brace.