Mini Talon Flight Controller Mounts by Mochanic

Last crawled date: 3 years, 1 month ago

UPDATED 7/31/18
If you are putting off the assembly of your Mini Talon (gluing the fuselage halves together) because you have not decided on which autopilot mount you want, now you can go ahead and glue in the cradle and assemble the fuselage halves and still be able to swap out to just about any system you want at any time. (Before this universal mount kit, the cradle assembly once glued in place could not be taken apart to switch between system mounts if ever you decided to make a change for what ever reason.)
You will need (4) M2.5 and (4) M3 screws and taps required for mounting plates to cradle. This will allow you to put an M2.5 screw through the M3 hole without contact so that you can use any mount combination you choose at any time. (The undampened plates will screw directly to the top side of the cradle mounting tabs with M3 screws while the dampened base plates will screw to the bottom side of the cradle mounting tabs using M2.5 screws.)
Although this was primarily designed for the Pitlab AP system there are several universal mounting plates too including both dampened and un-dampened mounting plate for the iNav flight controller (or any other system with 30.5 x 30.5mm mounting) and many more. Including a plate that you can drill yourself when printed solid.
Just added a new base plate that includes a built in mount for the Pitlab current sensor. Check out the pictures to see the finished mount with the current sensor and ESC in place. (ESC mounts have not been uploaded at this time, but I am working on it)
Let me know if you guys would like for me to add other mounting plate options.