Thingiverse
Mini RAMBo Case by Looper
by Thingiverse
Last crawled date: 4 years, 7 months ago
Case for a Mini RAMBO. Designed to fit on the back side of the Z Rails on a Ord Bot Hadron 3d Printer. All parts will print flat.
http://reprap.org/wiki/MiniRambo
04/15/2017 - New Bottom - Updated to provide more space for the mounting screws. Also increased the clearance for screw heads.
Added a latch piece that can be glued onto the cover to allow a 4mm screw, inserted from the bottom, to hold the cover closed. I cut sections of 1.75 filament to use as dowel plugs.
http://reprap.org/wiki/MiniRambo
04/15/2017 - New Bottom - Updated to provide more space for the mounting screws. Also increased the clearance for screw heads.
Added a latch piece that can be glued onto the cover to allow a 4mm screw, inserted from the bottom, to hold the cover closed. I cut sections of 1.75 filament to use as dowel plugs.