Thingiverse
Mini Power Supply (DPS3003 and Laptop Supply)
by Thingiverse
Last crawled date: 4 years, 3 months ago
Case to house a Rui Deng DPS3003 and a Sony Vaio laptop power supply (model 101310-11) which I happened to have on hand. I wanted something without any mains internal wiring. The laptop power brick puts out 19.5V up to 2A so perfect for small projects at 12/5/3.3V.
This case is very specific to the Sony laptop power supply as it was designed to allow it to slot in without fixings and then be held in place. There is a cutout for the mains cable to plugin on the side directly into the supply. The laptop supply is a shielded type cable, so you need to get a little creative hooking it up. Otherwise very straight forward. For those that want to modify, STEP files are also included and you can access the Onshape document here if you want to do more.
Mini PSU Case for DPS3003 and Sony Laptop Supply Onshape Document
A few notes on the design. The to assemble you will need brass hot press inserts for the top of the case (up to 6mm deep but shorter works as well) and 6 x M3x40mm screws. You'll want some screw terminals as well this cases was designed for these ones. A bit of wire, crimps connectors and ferrules and you're good to go.
The little hole on the rear of the case is so you can see the power supplies LED when it is on. I inserted a piece of clear Nylon filament to act as a light pipe and glued it in place. This is of course optional.
This case is very specific to the Sony laptop power supply as it was designed to allow it to slot in without fixings and then be held in place. There is a cutout for the mains cable to plugin on the side directly into the supply. The laptop supply is a shielded type cable, so you need to get a little creative hooking it up. Otherwise very straight forward. For those that want to modify, STEP files are also included and you can access the Onshape document here if you want to do more.
Mini PSU Case for DPS3003 and Sony Laptop Supply Onshape Document
A few notes on the design. The to assemble you will need brass hot press inserts for the top of the case (up to 6mm deep but shorter works as well) and 6 x M3x40mm screws. You'll want some screw terminals as well this cases was designed for these ones. A bit of wire, crimps connectors and ferrules and you're good to go.
The little hole on the rear of the case is so you can see the power supplies LED when it is on. I inserted a piece of clear Nylon filament to act as a light pipe and glued it in place. This is of course optional.
Similar models
thingiverse
free
Case for DPS3003 power supply module by a0lex
...e by a0lex
thingiverse
case for power supply modules like dps3003 dp20v2a 30v5a 50v5a dc32v/3a.
minimal design without screws ;)
thingiverse
free
Power Supply (DPS3003 and Laptop Supply)
...power supply (dps3003 and laptop supply)
thingiverse
remix of mini psu (by ardenpm) to fit slightly bigger laptop power pack.
thingiverse
free
Laptop power supply cable wrapper by Alti94
...e holder is kept in place by the sides that fits on to the corners. as always i put the file to adjust the design with fusion360.
thingiverse
free
Ender 3/3 Pro LCD and Board Case by jhernandez857653
...this without the power supply screw down area so i have 2 versions of that...one with the hole for the usb cable and one without.
thingiverse
free
Toshiba laptop power supply organizer by walljoh
...d a screw to your desk and hang it up out of the way. then quickly remove it to take with your laptop. and keep cables organized.
thingiverse
free
Power supply cover by Basjohan
...le, made the cable slots a bit wider and added 1mm fillet to avoid 90° corners in the xy-plane (for smoother and faster printing)
thingiverse
free
Case for RD DPS3003 and equivalents by Non-ICE
...case for rd dps3003 and equivalents by non-ice
thingiverse
case for dps3003 programmable power supply and two banana plugs
thingiverse
free
HICTOP Pursa i3 Power Case by DolmondBoi
... right side of the power supply and the screw replaces one of the screws that holds the circuit board to the power supply casing.
thingiverse
free
Power Supply Plug Module by BajaNaji
...ole and moves the holes further away from the module to allow for drilling into the base without needing to screw in at an angle.
thingiverse
free
Vertical Wire Cable Mount
... more committed.
the insert slit is vertical but sideways on the print. don't worry about support, just snap the block off ;)
Dps3003
thingiverse
free
DPS3003 USB-C Case with Banana Plugs
...dps3003 usb-c case with banana plugs
thingiverse
case for the dps3003 and usb-c pcb from china
thingiverse
free
Case for RD DPS3003 and equivalents by Non-ICE
...case for rd dps3003 and equivalents by non-ice
thingiverse
case for dps3003 programmable power supply and two banana plugs
thingiverse
free
Case for DPS3003 power supply module by a0lex
...e by a0lex
thingiverse
case for power supply modules like dps3003 dp20v2a 30v5a 50v5a dc32v/3a.
minimal design without screws ;)
thingiverse
free
DPS3003/5 Single Case by bladel
...dps3003/5 single case by bladel
thingiverse
remix for 130x95x40mm power supply. (24v 5a)
thingiverse
free
Power Supply (DPS3003 and Laptop Supply)
...power supply (dps3003 and laptop supply)
thingiverse
remix of mini psu (by ardenpm) to fit slightly bigger laptop power pack.
thingiverse
free
DPS3003 Power Supply Case by stlspartan
... configuration the jacks on the back are switched but unfused and are connected directly to the wall supply (19v dc for example).
thingiverse
free
DPS3003/5 Lab power supply
...ness should be ~1.2mm and support generation should be on angles below 45 deg.
material used was devil design pla on ender 3 pro.
thingiverse
free
Portable DPS3003/5 PSU by mile264
...tiple power inputs plugged in at the same time. anodes to each power input and cathodes tied together to dps module power inputs.
thingiverse
free
DPS bottom with cooling by adriankoooo
...dps bottom with cooling by adriankoooo thingiverse dps3003 dps3005, dps5005 power supply minimal case with cooling. the...
Laptop
3d_export
$5
Laptop
...laptop
3dexport
laptop
archibase_planet
free
Laptop
...laptop
archibase planet
notebook laptop pc
laptop - 3d model for interior 3d visualization.
archibase_planet
free
Laptop
...laptop
archibase planet
notebook laptop pc
laptop asus - 3d model for interior 3d visualization.
3d_export
$5
Laptop
...laptop
3dexport
laptop with good typeboard. will be happy if it will be usefull for someone
3d_ocean
$19
laptop
...d com computer dell electronic high poly inspiron lap lapi laptop material model new tab usb
high poly uv unwrap, textured laptop
3d_export
$6
Laptop
...it your taste. the model consists lot of meshs. laptop body laptop cap buttons speaker cabinet speakers table table legs sul etc
3d_ocean
$8
Office Laptop
...rings.obj blender_rings.obj //////////////////////////////////////////////////////////////////////////////////////////////////...
turbosquid
$7
Laptop
...top
turbosquid
royalty free 3d model laptop for download as on turbosquid: 3d models for games, architecture, videos. (1488076)
turbosquid
$2
laptop
...laptop
turbosquid
free 3d model laptop for download as max on turbosquid: 3d models for games, architecture, videos. (1618080)
turbosquid
$10
Laptop
...
turbosquid
royalty free 3d model laptop for download as skp on turbosquid: 3d models for games, architecture, videos. (1375855)
Supply
turbosquid
$1
supplies
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$5
black supply
...black supply
3dexport
black supply size: 57.9 x 29.2 x 34 sm
turbosquid
$20
Office Supplies
...lty free 3d model office supplies for download as max and obj on turbosquid: 3d models for games, architecture, videos. (1273636)
3d_export
free
office supplies
...office supplies
3dexport
turbosquid
$8
Supply Drop
...e 3d model supply drop for download as fbx, obj, dae, and stl on turbosquid: 3d models for games, architecture, videos. (1663721)
turbosquid
$75
Supply Helicopter
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$65
Supply Ship
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$29
Village Supplies
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$19
Power Supply
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$5
school supplies
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
Mini
turbosquid
$10
Mini Mini Luceplan
...
royalty free 3d model mini mini luceplan for download as max on turbosquid: 3d models for games, architecture, videos. (1227359)
3d_ocean
$39
Mini Cooper
...mini cooper
3docean
cabrioler cooper mini
mini cooper cabrioler
3d_export
$30
Mini lathe
...mini lathe
3dexport
mini lathe
3d_export
$5
mini mouse
...mini mouse
3dexport
mini mouse
3d_export
$5
mini house
...mini house
3dexport
mini house
3d_export
free
Mini Mecha
...mini mecha
3dexport
concept of mini mecha
3d_ocean
$20
Mini Gun
...mini gun
3docean
gatling gun gun machine gun mini gun weapon
model of a mini gatling gun.
3ddd
free
Herve mini
... кофейный , herve
http://www.mobiliavenanti.it/ru/products/hervè-mini
3d_export
$5
mini wall
...mini wall
3dexport
mini wall for living room
3d_export
$5
mini bank
...mini bank
3dexport
mini bank 3d model
Power
turbosquid
$100
power
...ower
turbosquid
royalty free 3d model power for download as on turbosquid: 3d models for games, architecture, videos. (1421990)
3d_export
$5
Power
...power
3dexport
3d_export
$5
power outlets
...power outlets
3dexport
power outlets
3ddd
$1
lion power
...lion power
3ddd
лев , статуя
lion power gold sculpture
3ddd
$1
Sea Power
...
компас , море , часы
часы с компасом sea power
3ddd
free
Meridiani / Power
...power
3ddd
meridiani , круглый
стол power производитель meridiani, диаметр 120,высота 67
3d_export
$5
Power Surge
...power surge
3dexport
the power surge is a all mesh carnival ride to lower in game part count and lag
turbosquid
$8
Airport Ground Power Unit (AXA Power )
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$50
Power Houser
...rbosquid
royalty free 3d model power houser for download as on turbosquid: 3d models for games, architecture, videos. (1333800)
3d_export
$5
power outlet
...power outlet
3dexport
power outlet<br>format file maya 2018, 3d max 2017, obj, fbx