Thingiverse
mini micro joystick
by Thingiverse
Last crawled date: 5 years, 9 months ago
This isn't the joystick itself, but a holder for a surface mount 5 way momentary switch joystick. It allows use of the surface mount joystick w/o soldering directly on a circuit board. Amazon part number: a13070200ux0703. You need to shave off some automation locator nubs on the bottom of the micro switch so it will lay flat.
This is another Thing that isn't going to wow anyone, but it fits my need (the beauty of 3D printing). I have to replace a poorly designed joystick on a child's remote control excavator. Since this is about a generic thing, I won't bore you with the details of that fix unless someone has a similar problem and asks for details.
Note: there are 2 bottom stl files. The bottom0.stl is a generic one, and the bottom.stl is a specific one for my application. You actually don't need the bottom part at all if you mount on a flat surface.
The holder has holes for 3mm bolts
This is another Thing that isn't going to wow anyone, but it fits my need (the beauty of 3D printing). I have to replace a poorly designed joystick on a child's remote control excavator. Since this is about a generic thing, I won't bore you with the details of that fix unless someone has a similar problem and asks for details.
Note: there are 2 bottom stl files. The bottom0.stl is a generic one, and the bottom.stl is a specific one for my application. You actually don't need the bottom part at all if you mount on a flat surface.
The holder has holes for 3mm bolts