Mini-ITX Open-Frame SFF PC CASE with 240mm rad support by wheelowen

Last crawled date: 4 years, 11 months ago

Added three sections to support a radiator. Also added some channels to route cables through. Like the original, you can still use either an atx or sfx psu. If you use an sfx psu, you may need longer psu cables. The base for the radiator is flat for adding front I/O, drives, fan controllers, etc. My system runs ridiculously quiet on this open case. Make sure to be careful of where you put glue, especially where the GPU slots in. I used JB weld and some boxes to keep the sides upright.