Thingiverse
mini itx / micro atx open case by pelelademadera
by Thingiverse
Last crawled date: 5 years, 2 months ago
its a simple open case, for micro atx (mATX) and mini itx desktop boads.
with atx psu support, and a single 2.5 ssd/hdd.... Really uncomfortable to mount, but works, and other accesories, ideally for an m.2 device
there are 2 pieces.
base, the main case, supports required, and a 220mm bed.
backsupport, there is only required if you want to use any attached pci device. not required at all for no graphics or any pci device. and add a support for a 120mm only attached by 2 screws, possibly an aio or something like a fan for vrm or nothing...
it can be upgraded, of course, request the source file and I happily send you.
por assembly, the only required are motherboard male/female spacers (standard ones) and screws, for psu and motherboard
Base file havent got the stl extention, rename is as base.stl to work.
sorry for my mistake
with atx psu support, and a single 2.5 ssd/hdd.... Really uncomfortable to mount, but works, and other accesories, ideally for an m.2 device
there are 2 pieces.
base, the main case, supports required, and a 220mm bed.
backsupport, there is only required if you want to use any attached pci device. not required at all for no graphics or any pci device. and add a support for a 120mm only attached by 2 screws, possibly an aio or something like a fan for vrm or nothing...
it can be upgraded, of course, request the source file and I happily send you.
por assembly, the only required are motherboard male/female spacers (standard ones) and screws, for psu and motherboard
Base file havent got the stl extention, rename is as base.stl to work.
sorry for my mistake