Mini Collapsible Basket by 3DPRINTINGWORLD

Last crawled date: 3 years, 1 month ago

Mini Collapsible Basket (Remix)
This might be the cutest thing I’ve ever printed! I also have a Monoprice Mini so I was curious to see if the basket would print small enough to fit in the Mini. I decided to try printing it scaled down to 4” or 101mm high and it worked! The only issue was that the basket was just a little too tight, so I created this version.
This version is a scaled down version of the original but I opened up the clearances before I scaled it down to make it easier to print. Since this basket is smaller in total I did reduce the size of the clearances when compared to the original. I tried opening up the clearances similar to the original but it did not function as well as everything is so much smaller. As a result of the smaller clearances this version might be little harder to print then the original. I also added another leaf to the basket as a result of the increased clearances.
If your interested in the filament I used and throwing a little support my way here are my Amazon affialte links to the filament I used for the baskets shown in the pictures.
Large basket: https://amzn.to/2r4Q10h (everybody loves this filament!)
Small Basket: https://amzn.to/2Bz8DM1 (a bit expensive but I use a standard .4 nozzle and have gone thru a few spools and have never had a clog)
The original size basket can be found here: https://www.thingiverse.com/thing:2901274
Video of the original basket: https://youtu.be/7OAqEXW8H-k