Thingiverse
Milwaukee M18 Tool clip by KiwiTinkerer
by Thingiverse
Last crawled date: 3 years, 2 months ago
I designed this for my tools to hang in a work vehicle, hence the clip mechanism.
Like this? then check out my M12 Tool Mount (Battery remix); https://www.thingiverse.com/thing:3161145
check out my M12 Heavy Tool Clip I designed;https://www.thingiverse.com/thing:3168627
I used the standard clips for a spring e.g. < 0.8x9x35 mm.
experimental: Or use a 1x9x30 mm compression spring(use 3 mm clips).
If you use the 3 mm clip with a weak spring it will stick and not move easily.
The short side of the triangle on the clip faces away from the "forked" side of the tool body, this makes it easy to slide on but harder to slide off. Recommend printing mirror image of the clip due to design clearances but if you can't be bothered it probably will work fine if you just print two of the same. Also the side with the slightly smaller spring gap is the top side :)
Tested its grip on Tools by hanging a drill on my wall the wrong way (weak clip mechanism should just fall out).
If you have tool belt clips for all your tools like I have then a spacer will be required. I will be cutting blocks of plywood or timber as I feel its just a wast of plastic and printing time. I need to print like 20 of these things. When installing this clip I highly recommend putting screws through both holes to avoid the clip breaking.
If a stronger clip is required for your use just use a stiffer spring and beef up the clips with more perimeters for strength.
It will be interesting to see how they weather living in a hot car. PET would probably be better but for me Pla is the cheapest by 50%.
I have done some prototyping but now only time and usage will tell. This Thing is finished but If I or someone else has any problems with the design then I'll see about fixing it.
Lastly it would pay to note that most genuine tools and batteries slightly vary in size. I tested this in multiple tools with the same clip and some fit tighter and others slightly looser.
Please, any feedback welcome ;P
Update 17/10/2018: changed spring size to 1x9x30 mm by cutting down the spring. This fixed the spring breaking the clip due to be too strong. I have ordered; 0.9x9x30 and 0.8x9x30 mm compression springs for further research into which spring is best suited. At the moment the 1x9x30 mm compression spring is working well with repeated use but is just still a bit strong and difficult to remove the tool but does not break the clips.
Update 08/10/2018: added 3 mm clip for use with a 1x9x35 mm compression spring. I call this the klingon tool clip update! (11/10/18 this springs seems to strong. Need to change something, will update).
Update 26/09/2018: re added files as there seemed to be an extra layer glitch. new file fixed it.
Update 26/09/2018: re added files with correct orientation and added a file with clip and mirrored clip together.
https://youtu.be/rGIMzFOnikshttps://youtu.be/zihTkhaCqkE
Like this? then check out my M12 Tool Mount (Battery remix); https://www.thingiverse.com/thing:3161145
check out my M12 Heavy Tool Clip I designed;https://www.thingiverse.com/thing:3168627
I used the standard clips for a spring e.g. < 0.8x9x35 mm.
experimental: Or use a 1x9x30 mm compression spring(use 3 mm clips).
If you use the 3 mm clip with a weak spring it will stick and not move easily.
The short side of the triangle on the clip faces away from the "forked" side of the tool body, this makes it easy to slide on but harder to slide off. Recommend printing mirror image of the clip due to design clearances but if you can't be bothered it probably will work fine if you just print two of the same. Also the side with the slightly smaller spring gap is the top side :)
Tested its grip on Tools by hanging a drill on my wall the wrong way (weak clip mechanism should just fall out).
If you have tool belt clips for all your tools like I have then a spacer will be required. I will be cutting blocks of plywood or timber as I feel its just a wast of plastic and printing time. I need to print like 20 of these things. When installing this clip I highly recommend putting screws through both holes to avoid the clip breaking.
If a stronger clip is required for your use just use a stiffer spring and beef up the clips with more perimeters for strength.
It will be interesting to see how they weather living in a hot car. PET would probably be better but for me Pla is the cheapest by 50%.
I have done some prototyping but now only time and usage will tell. This Thing is finished but If I or someone else has any problems with the design then I'll see about fixing it.
Lastly it would pay to note that most genuine tools and batteries slightly vary in size. I tested this in multiple tools with the same clip and some fit tighter and others slightly looser.
Please, any feedback welcome ;P
Update 17/10/2018: changed spring size to 1x9x30 mm by cutting down the spring. This fixed the spring breaking the clip due to be too strong. I have ordered; 0.9x9x30 and 0.8x9x30 mm compression springs for further research into which spring is best suited. At the moment the 1x9x30 mm compression spring is working well with repeated use but is just still a bit strong and difficult to remove the tool but does not break the clips.
Update 08/10/2018: added 3 mm clip for use with a 1x9x35 mm compression spring. I call this the klingon tool clip update! (11/10/18 this springs seems to strong. Need to change something, will update).
Update 26/09/2018: re added files as there seemed to be an extra layer glitch. new file fixed it.
Update 26/09/2018: re added files with correct orientation and added a file with clip and mirrored clip together.
https://youtu.be/rGIMzFOnikshttps://youtu.be/zihTkhaCqkE
Similar models
thingiverse
free
smok alien holster by makermaster25
...rint ..enjoy
10-8-17 update, added another stl with a thicker piece on the belt clip to prevent breaking at the stress point enoy
thingiverse
free
Tool Holder for Original Prusa i3 MK3 & MK2/MK2S by acorderob
...ded version (v30) to add space for mmu2 tools and other things. old version is v20.
2018/08/30: added a variant for the mk2/mk2s.
thingiverse
free
Sonic Screwdriver 13th Doctor by OdomLinx
...
leds, battery and switch can be installed
is easier to print
and in different materials printable e.g. transparent for the light
thingiverse
free
SanDisk Cruzer Fit USB Case by RT3DWorkshop
... the old, somehow it was being scaled in cm and not mm.
added: sandiskcruzerfit_case_notext.stl, has no text on the side anymore.
thingiverse
free
Photo Sweep Stand infinity backdrop by mistertech
...g clip separated. you need to print the spring clip file only if you print the "no spring" versions of the stand sides.
thingiverse
free
Hyundai armrest replacement clip by mafe72
...2016:
if you are having problems with the clip not holding tight the armrest, i have added the v2 model that will fix this issue.
thingiverse
free
Watch Stand 6x by k3usr
...ded support on the right side to avoid any potential sagging in the future.
update: 21 oct 2018
added v3.2 slightly wider again.
thingiverse
free
Little MasterSpool Roller + Sticker (fixed stl, multiple versions, including sourcefile) by kleinerELM
... the included clips are to small: ttgeek has published a modified version of the clips: https://www.thingiverse.com/thing:3168375
thingiverse
free
Filament clip for 3mm filament by bneedhamia
...p side is very tight, and tends to break. 2) the reel clip side tends to fly off the reel. ...but i like the look of the clip ;-)
thingiverse
free
Wanhao Duplicator i3 Tool Holder by alexberkowitz
...'s designed to attach to the right side of the machine, but can easily be mirrored in your slicer to attach to the left side.
Kiwitinkerer
thingiverse
free
Post Insulator outrigger by KiwiTinkerer
...
added insulator with 90 degree bend with 2 mm gap.
i've changed the infill percentage to 15 as 30 is still kind of overkill.
thingiverse
free
Post Insulator outrigger V2 by KiwiTinkerer
...longside each other. if you would like a specific size hole or outrigger length just let me know and i'll upload one for you.
thingiverse
free
52mm Spindle Original clamp bracket by KiwiTinkerer
...s for the tool mount.
side note, i'm going to remount the bracket so the spindle is higher to get more clearance on materiel.
M18
turbosquid
$12
M18 Grenade
...osquid
royalty free 3d model m18 grenade for download as fbx on turbosquid: 3d models for games, architecture, videos. (1188831)
3d_export
$5
m18 smoke grenade
...m18 smoke grenade
3dexport
3d model m18 smoke grenade. granada.
3d_export
$29
AN M18 3D Model
...ignal weapon military usa american
an m18 3d model download .c4d .max .obj .fbx .ma .lwo .3ds .3dm .stl humster3d 113547 3dexport
3d_export
$20
M18 Hellcat
...d model is low number of vertices,polygon mesh for games.<br>for further questions please do not hesitate to send a message
turbosquid
$6
M18 Claymore mine
...
royalty free 3d model m18 claymore mine for download as fbx on turbosquid: 3d models for games, architecture, videos. (1712413)
humster3d
$25
3D model of AN M18
...ter3d
buy a detailed 3d model of an m18 in various file formats. all our 3d models were created maximally close to the original.
turbosquid
$14
M18 smoke grenade
...y free 3d model m18 smoke grenade for download as fbx and obj on turbosquid: 3d models for games, architecture, videos. (1587624)
turbosquid
$1
M18 Smoke Grenade
...l m18 smoke grenade for download as obj, fbx, blend, and gltf on turbosquid: 3d models for games, architecture, videos. (1499668)
turbosquid
$16
M18 Smoke Grenade
...8 smoke grenade for download as 3ds, obj, fbx, blend, and dae on turbosquid: 3d models for games, architecture, videos. (1184120)
turbosquid
$11
M18 Smoke Grenade
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
Milwaukee
3d_export
$49
Milwaukee Mitchell Airport 10km
...milwaukee mitchell airport 10km
3dexport
turbosquid
$30
Table lamp MILWAUKEE by Ferr
...ree 3d model table lamp milwaukee by ferr for download as max on turbosquid: 3d models for games, architecture, videos. (1247510)
turbosquid
$12
Milwaukee m28 cell holder
...y free 3d model milwaukee m28 cell holder for download as 3ds on turbosquid: 3d models for games, architecture, videos. (1237815)
turbosquid
free
milwaukee ep 2 electric locomotive
... model milwaukee ep 2 electric locomotive for download as obj on turbosquid: 3d models for games, architecture, videos. (1707833)
turbosquid
$1
hiawatha milwaukee class a steam locomotive
...aukee class a steam locomotive for download as , 3ds, and obj on turbosquid: 3d models for games, architecture, videos. (1713563)
3d_export
$199
milwaukee city wisconsin usa 50km
...der ready. 1. suitable for games, games, education, architecture etc. 2. mainly used for town and urban planning, real estate etc
3d_export
$7
Wrench 3D Model
...wrench 3d model 3dexport wrench makita torque milwaukee tool dewalt how to impact bosch gun adjustable right...
thingiverse
free
Milwaukee by
...milwaukee by
thingiverse
milwaukee
thingiverse
free
milwaukee batteriholder
...milwaukee batteriholder
thingiverse
batteriholder for milwaukee
easy to print
thingiverse
free
Milwaukee Makerspace by raster
...milwaukee makerspace by raster
thingiverse
a line rendition of the milwaukee makerspace logo.
Clip
archibase_planet
free
Clip
...clip
archibase planet
paper-clip clip office equipment
clip band - 3d model for interior 3d visualization.
3d_export
$5
screw clip
...screw clip
3dexport
screw clip
3d_ocean
$4
Butterfly clip
... a butterfly clip, it comes with a ready to render set for out of the box rendering. obj version and max alones version included.
turbosquid
$2
clip
...
royalty free 3d model clip for download as ma, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1358622)
turbosquid
$5
Clip
...lty free 3d model clip for download as c4d, 3ds, fbx, and obj on turbosquid: 3d models for games, architecture, videos. (1521355)
turbosquid
$19
Clip
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$4
Clips
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$3
clip
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$2
clips
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
clip
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
Tool
turbosquid
$21
Tool box with tools
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
archibase_planet
free
Tools
...tools
archibase planet
tools instruments implements
tools n070114 - 3d model (*.gsm+*.3ds+*.max) for interior 3d visualization.
3d_ocean
$12
Tools
...tools
3docean
hammer metal old screw tools wrench
maya
turbosquid
$6
Tool Cart / Tool Box
...
royalty free 3d model tool cart / tool box for download as on turbosquid: 3d models for games, architecture, videos. (1241859)
3d_ocean
$15
crimp tool
... tool copper cutter crimp crimp tool electrical electrical tools press tools pressing tool tools wire cutter
created in maya 2013
3d_ocean
$5
Tools
...tools
3docean
3d models paint tools work
3d,models,works,paint,art,create,working,
3d_export
free
tools
...tools
3dexport
coldsteel
turbosquid
$15
Tools
...turbosquid
royalty free 3d model tools for download as blend on turbosquid: 3d models for games, architecture, videos. (1331352)
3ddd
$1
bar tool
...bar tool
3ddd
барный
bar tool
turbosquid
$35
tools
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.