Thingiverse
Mike's Hot End v2 by mikefazz
by Thingiverse
Last crawled date: 4 years, 7 months ago
See latest version at: https://www.youmagine.com/designs/mikes-hot-end-v2-5
along with its associated water block: https://www.youmagine.com/designs/triple-water-block
I took my previous design and modified it to work for 1.75mm filament. Keeping the threaded rod the same size allowed a simplified design.
I found a ceramic liner very close in size and will soon test it for high temp printing....
This is designed to fit with my water-cooling setup (coming soon)
ignore nozzle stl that is just for thingivers...
along with its associated water block: https://www.youmagine.com/designs/triple-water-block
I took my previous design and modified it to work for 1.75mm filament. Keeping the threaded rod the same size allowed a simplified design.
I found a ceramic liner very close in size and will soon test it for high temp printing....
This is designed to fit with my water-cooling setup (coming soon)
ignore nozzle stl that is just for thingivers...