MicroSwiss Hotend

...nted parts required to use the orion with a microswiss hotend. i have not personally tested these parts with a microswiss hotend.

...iss hotend cr-10 grabcad this is a mockup of the microswiss hotend for the cr-10, a basic mockup for the x-carriage is included.

... thingiverse little change for the hotend fan adapter to hold the microswiss all metal hotend (slightly longer and sharp edges).

... adjuster for ender 3 with microswiss hotend thingiverse bl touch (creality version) adjuster for ender 3 with microswiss hotend

...lingring microswiss all metal hotend (remix) by aztal thingiverse remixed to fit my ender 5 with the microswiss all metal hotend

...3d v6 hotend but i do have the microswiss so i set to making it fit. i hope this helps someone, if it does please post a make.

...r attaching 29mm microswiss hotend to sapphire s. uses 40x20 radial fan, integrated airduct, lower and upper parts snap in place.

...micro swiss hotend cable strain relief by redwhere2020 thingiverse microswiss hotend cable strain relief.

...the microswiss hotend sits a tiny bit lower than original creality. this remix has a 1 mm lower nossle and reinforced screw ears.

...sured 1.4mm shorter than creality stock hotend. use m3 screws to fit it. thats my first post in thingiverse sorry my poor english

...microswiss ender 3 by joferval thingiverse microswiss direct drive adapter for ender 3

...nted parts required to use the orion with a microswiss hotend. i have not personally tested these parts with a microswiss hotend.

...3d v6 hotend but i do have the microswiss so i set to making it fit. i hope this helps someone, if it does please post a make.

... adjuster for ender 3 with microswiss hotend thingiverse bl touch (creality version) adjuster for ender 3 with microswiss hotend

... by ericthetazman thingiverse i made this to account for new position of x endstop with microswiss direct drive on my longer lk4

...thingiverse modified for the ender 3 microswiss dd to fit cr10s pro. had to raise bed 5mm set x axis off set to -35 and y to -25

...hotendf by jfmvoers thingiverse cooling nozzle for a creality cr10s with microswiss hotend.also fits on other creality printers.

...giverse.com/thing:4787797/files and https://www.thingiverse.com/thing:4647053 to fit on ender 3 v2 with microswiss and 5010 fan

...sured 1.4mm shorter than creality stock hotend. use m3 screws to fit it. thats my first post in thingiverse sorry my poor english

...all metall 300°c microswiss hotend. (https://store.micro-swiss.com/products/all-metal-hotend-kit-for-cr-10) the fang fits good ..

...hotend by fablab_lueneburg thingiverse hotend model

...hotend for graber thingiverse hotend complement pastes for graber printerhttps://youtu.be/0koxhnsuhdy

...hotend adapter by antaviana thingiverse hotend adapter

...hotend fan by mming1106 thingiverse hotend fan

...hotend schema by ione thingiverse hotend project schema

...s with integrated supports. more for the project you can see here: https://kf-designs.com/2019/09/07/fabtotum-printer-conversion/

...tend, when you make your new hotend or repair your j-head or mg-plus hotend. the hole of 16mm, please adjust using a reamer, etc.

...chimera hotend ! and new basis (the hole from original is to small) it is a remix form skimmy's fast magnetic hotend changer

... thingiverse little change for the hotend fan adapter to hold the microswiss all metal hotend (slightly longer and sharp edges).

...merlin hotend by alejanson thingiverse this is a 1:1 drawing of the classic merlin hotend.