Thingiverse
Microsoft Xbox One Sync button fix clip bezel replacement by Peppered
by Thingiverse
Last crawled date: 4 years, 5 months ago
I had received an xbox one that had a non-functioning sync button. Thankfully i had another console on hand so i measured and created a replacement.
Has been test fitted on 2 consoles manufactured 2 years apart and functions fine.
Was designed with a 0.8mm nozzle in mind but should be OK with a smaller nozzle.
Ideal layer height is 0.2mm.
Has built in supports as part of the model, once printed simply break the supports off the sides being careful not to snap the ear off.
I have printed with PETG but other materials should be fine.
I am also selling these on eBay if you do not have a printer.
Any feedback and suggestions are appreciated.
Has been test fitted on 2 consoles manufactured 2 years apart and functions fine.
Was designed with a 0.8mm nozzle in mind but should be OK with a smaller nozzle.
Ideal layer height is 0.2mm.
Has built in supports as part of the model, once printed simply break the supports off the sides being careful not to snap the ear off.
I have printed with PETG but other materials should be fine.
I am also selling these on eBay if you do not have a printer.
Any feedback and suggestions are appreciated.