Microphone Balls by ONealBrew

Last crawled date: 3 years ago

"Check, Check... Is this thing on?"
This print requires two 608 bearings, for a smooth dangle... and a washer, with screw/bolt...I used a M3*4 bolt...
The balls need a little more weight for them to sway better, so I printed at 40% infill.
The bearing is a tight fit, but with enough force it will go in.
These were designed specifically for the microphones included with the wireless mic system Phenyx Pro PTU-7000A. I am unsure if the threads will work for any other mics so I included a test print for the threads.
I also included my attempted hairy print, I personally preferred the hairless ones since the supports were a hassle, and the wall I made a little too thick .
I provided the balls, now all that's missing is the tip hahaha... see what I did there?
Cheers