Micro Hex /w camera mount and BBB-FC holder 8.5mm by Puppetx

Last crawled date: 3 years ago

This is a remix of brod's Micro Spider Hex Multirotor. This is the 8.5mm motor mount version. I've added frame to hold a Beef's Brushed Board flight controller in place while leaving room for the hex adapter. I've also added a camera mount for a cc1564 micro camera which has a slight upward tilt, inspired by SirQuentin's FireFlo series quad.
Big thanks to brod for the .scad file to play with!
Latest update - 8.9mm motor mounts, on my printer motors fit snug in these mounts simply pressed in. Added a notch for camera rubber band. Added pegs for battery rubber bands. Printing in ABS this time. The last printed PLA frame would warp when the VTx and Battery got very hot. Hopefully ABS will prevent this.
*edit: The ABS 8.9mm print works great, is lighter than PLA and handles heat better. Motors are not totally snug until they near the bottom of the motor mounts, but then the end of the can snaps in place and holds very well, while still providing support all the way to the top. Two different types of 8.5mm motors have been tested and work well. Going to stop work on this model here unless edits are requested.