Thingiverse
MESARC FlatFighter modular motor mount by Tiktiki
by Thingiverse
Last crawled date: 4 years, 7 months ago
3D printable version of the plywood motor mount for MESARC foamie.
http://www.mesarc.club/
You can print each file separate or use the 1-shot to print the assembly.
4 M3x8 screws hold the motor mount. You can remove to access your motor/wires.
Holes pattern is 16/19 like most 22-size outrunner motors.
Fits SUPPO 2212/6 as well as non-standard patterns (14/14 for theses cheap motors: http://www.hobbyking.com/hobbyking/store/__54277__Multistar_350QX_Blade_Motor_set_4pcs_Box_2209_1200KV.html?strSearch=2209%201200).
http://www.mesarc.club/
You can print each file separate or use the 1-shot to print the assembly.
4 M3x8 screws hold the motor mount. You can remove to access your motor/wires.
Holes pattern is 16/19 like most 22-size outrunner motors.
Fits SUPPO 2212/6 as well as non-standard patterns (14/14 for theses cheap motors: http://www.hobbyking.com/hobbyking/store/__54277__Multistar_350QX_Blade_Motor_set_4pcs_Box_2209_1200KV.html?strSearch=2209%201200).