Thingiverse
Mega Keyer complete enclosure
by Thingiverse
Last crawled date: 5 years, 4 months ago
A remix of W6IPA's Mega Keyer enclosure design so that there is now a printed bottom, top and sides. I also added the "engraving" for the port names.
There is a video on YouTube of the keyer in action https://youtu.be/KYbplGL4TiI
Encoder knob from here https://www.thingiverse.com/thing:3904056
Update - added a "reset" lever through the back panel to allow the reset button on the Arduino to be pressed. Use "Rear V7" for the cut out and then fasten the Reset Lever through the rear panel with a 2mm screw and washer.
There is a video on YouTube of the keyer in action https://youtu.be/KYbplGL4TiI
Encoder knob from here https://www.thingiverse.com/thing:3904056
Update - added a "reset" lever through the back panel to allow the reset button on the Arduino to be pressed. Use "Rear V7" for the cut out and then fasten the Reset Lever through the rear panel with a 2mm screw and washer.