Thingiverse
Meepo / WOWGO ESC adapter by IdefixRC
by Thingiverse
Last crawled date: 5 years ago
Simple adapter plate to allow for easy installation of a WOWGO 2S ESC in a Meepo ESC enclosure.
Simply print the adapter (I used 3 floor/wall/perimeter and 35% infill), (replace the Meepo switch with the WOWGO switch before you proceed) press it into place in the ESC enclosure (it is a very tight fit). Run thin CA around the edge to permanently fix the adapter to the enclosure, add silicone sealant if necessary around the CA seam, add some silicone around the top of the adapter and press the WOWGO esc in place.
Connections are plug and play to the Meepo motors and battery.
Enjoy your new WOWGO/Hobbywing powered Meepo board
Simply print the adapter (I used 3 floor/wall/perimeter and 35% infill), (replace the Meepo switch with the WOWGO switch before you proceed) press it into place in the ESC enclosure (it is a very tight fit). Run thin CA around the edge to permanently fix the adapter to the enclosure, add silicone sealant if necessary around the CA seam, add some silicone around the top of the adapter and press the WOWGO esc in place.
Connections are plug and play to the Meepo motors and battery.
Enjoy your new WOWGO/Hobbywing powered Meepo board