Medieval Castle ATX Computer Case by ThatRobotGuy

Last crawled date: 3 years, 1 month ago

This is an entirely 3D printed full size ATX computer case in the style of an old medieval castle.
It is printed as small tiles (largest 85mm x 117mm) that require super gluing together into large panels that can be attached to an extruded aluminium frame.
These are the size of the 2020 aluminium extrusions you need to cut:
4 x 340mm
5 x 175mm
4 x 250mm
Each of the windows have a 12v 30mm fan mounted to them using 12mm M3 bolts and 1mm stainless steel gauze. The torches require 12v 3mm orange LEDs. These are soldered together and attached to the 12v from the PSU.
12 Roof tiles are super glued together but not attached to the frame for easy access to the PC.
This project doesn't require a large 3D printer but does take a long time to print off all of the tiles so do not attempt unless you have a lot of patience!
Feel free to modify and remix this project! Please contact me for commercial uses.