Thingiverse
MeArm Redesign by TheRedesignGroup
by Thingiverse
Last crawled date: 3 years ago
This is a 3D printer friendly version of the MeArm. Please note that this is a finished product but not tested. The features are mostly the same as the standard MeArm, but the servo mounts have been changed significantly; the upper arm support and main arm support have been fused for ease of assembly as well. This is simply a remix meant to keep the functionality of the standard, but ease the printing process and assembly.
Credit: MeArm Limited UK for original design.
You can find the instructions for the assembly at:http://www.instructables.com/id/Pocket-Sized-Robot-Arm-meArm-V04/
PLEASE NOTE:
-The servo mounts allow the servo to be slid into the housing unit and claw unit.
A track was added to the bottom of the housing unit and Servo Arm Bottom for bearing system. This was added for stability and less friction.
A 2.3M tap is needed and a 2mm Allen Wrench.
(6) 2.3mm x 11mm screws are needed to mount the servos. The back holes of the servo mounts will need to be tapped before inserting screws.
(30+) 4.5mm diameter copper BBs are needed for bearing.
Credit: MeArm Limited UK for original design.
You can find the instructions for the assembly at:http://www.instructables.com/id/Pocket-Sized-Robot-Arm-meArm-V04/
PLEASE NOTE:
-The servo mounts allow the servo to be slid into the housing unit and claw unit.
A track was added to the bottom of the housing unit and Servo Arm Bottom for bearing system. This was added for stability and less friction.
A 2.3M tap is needed and a 2mm Allen Wrench.
(6) 2.3mm x 11mm screws are needed to mount the servos. The back holes of the servo mounts will need to be tapped before inserting screws.
(30+) 4.5mm diameter copper BBs are needed for bearing.
Similar models
thingiverse
free
meArm Improved Bottom Plate with Bearing by theRealThor
...y, i included some branded side panels as well:) the make the branding stick out, change filament at layer 30 (if printing 0.1mm)
thingiverse
free
Standard Servo Mount (screw mount) by kpcz
...standard servo mount (screw mount) by kpcz
thingiverse
added screw holes to mount servo on surface.
thingiverse
free
Remix of Robo3D Top Mount Spool Holder by smontanus
... the caps and bearings. the holes in the base have also been sized to be hand tapped for the 6-32 screw, also adding to rigidity.
thingiverse
free
6DOF Robot arm by ThatNewMaker_101
...on the bracket and then screw in the servo with m4 screws and nuts.
attach the gripper to the last servo with m3 screws and nuts.
thingiverse
free
Axial Capra Dig mount by Raguvian
...n mounts to servo arm with regular hardware that comes with servo (usually a self tapping screw) and slots into transmission arm.
thingiverse
free
Josele_meArm v0.1 ( meArm robotic Arm ) by jperbar409
...s and plates_ladder.
i will try to make a pdf with assembling instructions asap. meanwhile, clean the bed and print the full set.
thingiverse
free
Servo Mount for S500 Quadcopter
... rods on s500 frame. use 3 m3 screws/nuts to assemble the top and bottom.
video of servo in action: https://youtu.be/h2docgscqtm
thingiverse
free
Serv-Arm improved for easier assembly
...or m3 or m4 screws. just use the screws that come with the servos.
made the gripper a little bit thinner so it bends more easily.
grabcad
free
Mount Assembly for Standard Servo
...f are custom parts, designed specifically for making a tight assembly with these other commercial parts. m2 and m3 screws needed.
thingiverse
free
Servo arm connector by bbogdanmircea
...the link if you want to modify it
use m3 wood screw to tap on servo arm
use m3 screw and nut to connect to ball joint bottom part
Mearm
thingiverse
free
MeArm 0.4 Printable (.stl) by agence_akira
...mearm 0.4 printable (.stl) by agence_akira
thingiverse
a printable version of mearm
thingiverse
free
Drawing Head for MeArm by ascii_ch
...d for mearm by ascii_ch
thingiverse
drawing head for mearm.
video from the protoype for this model: https://youtu.be/jjxfuax5gva
thingiverse
free
MeARM plates by osbock
...hem to print without bumping corners on the ultimaker 2.
this is remixed from a design by ben gray of phenoptix and jack howard
thingiverse
free
MeArm - Your Robot - v1.0 by phenoptix
... here to build your own or as a kit at our store in the ukthe hackaday store in the usa.
mearm is a trademark of mime industries.
thingiverse
free
Y.A.M.A.R by Dingo (MeArm Remix) by Dingo_aus
....
extra parts to stablise and avoid backlash
in the photos, parts in red are the improved parts. blue are standard mearm 0.4.
thingiverse
free
MeArm v1.0 Piece 7 by rcrocco77
...ling a mearm robot from mime industries i shattered piece 7. this is a replacement part made by measuring the remaining fragment.
thingiverse
free
MeArm V0.4 - Pocket Sized Robot Arm by phenoptix
...day projects
mearm is a trademark of mearm limited uk. use of the mearm designs is allowed but not use of the mearm trademark.
thingiverse
free
meArm (UPV version) by larmesto
...that everything can be mounted on the robot.
dxf file provided, together with stl for 3d printing as well as solidworks assembly.
thingiverse
free
MeArm - Your Robot - v1.0 cleaned up by jonnycowboy
...s in mm.
all source files designed by phenoptix.
license cc-by-sa as with original shared design.
mearm trademarked by phenoptix.
Redesign
3d_ocean
$45
Hyundai SUV vehicle redesigned
...was redesigned by me. 3d model was created in blender3d.preview images were rendered with realistic plugin yafaray.side view o...
turbosquid
$25
Pagani Huayra Redesign
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
Colt M16 (Redesign)
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$30
3D for Pose Scarlet Witch redesign\para Posar redesign Feiticeira Escarlate
... imprimir redesign feiticeira escarlate for download as blend on turbosquid: 3d models for games, architecture, videos. (1700850)
3d_export
$5
Gaz 21 redesign 3D Model
...gaz 21 redesign 3d model
3dexport
gaz 21 volga
gaz 21 redesign 3d model rossergorp 71511 3dexport
turbosquid
$55
Porsche Cayman 2015 redesign
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_ocean
$55
Gallardo superleggera redesign
...model was made with blender3d 2.62.preview images were rendered with blender3d and yafaray 0.1.2 realistic rendering engine.ob...
3d_ocean
$55
Chevy Stingray 2013 redesign
...car.i gave my best to create accurate model,but without top view image it wasn’t possible for me.so when i lost a lots of nerv...
turbosquid
$30
Redesign Crash Bandicoot (c4d,obj,max,zpr)
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
$1
Tango Floor Lamp
...3ddd andrey kole , tango , castlewerks andrey kole redesign tango floor lamp by castlewerks. 3dsmax2012 - corona...