Thingiverse
Meanwell RS-15-5
by Thingiverse
Last crawled date: 4 years, 3 months ago
This is an enclosure for a Meanwell RS-15-5, which can be mounted on a standard 40x40 aluminum v-slot extrusion rail. The three openings are for single USB type A. The holes for fasteners are wide and deep enough to fit 3mm hex socket head cap screws. The openings for fasteners which hold the cover to the base need to be taped with an M3 tap before screwing the fasteners. These fasteners should be about 10-15 mm long
Be sure to use short fasteners for the power supply in order not damage the isolating material between the metal case of the power supply and the PCB (it is some kind of waxed paper).
https://www.meanwell.com/Upload/PDF/RS-15/RS-15-SPEC.PDF
The datasheet of the psu specifies 3mm long M3 screws on the bottom and 4mm long M3 screws on the side. You don' need to use all four openings to fasten the power supply to the base but if you want you can.
The opening for the mains power is big enough for 3x0.75 (or 3x18AWG for all across the Atlantic Ocean) H03VV-F cable (or any three wired stranded sheathed cable)
I used it to power the Raspberry Pi of my ender 3 and conneted it to the C14 plug of the 24V PSU of the printer, thus with one AC power cable to the printer I power everything on it.
Hope it is useful.
Be sure to use short fasteners for the power supply in order not damage the isolating material between the metal case of the power supply and the PCB (it is some kind of waxed paper).
https://www.meanwell.com/Upload/PDF/RS-15/RS-15-SPEC.PDF
The datasheet of the psu specifies 3mm long M3 screws on the bottom and 4mm long M3 screws on the side. You don' need to use all four openings to fasten the power supply to the base but if you want you can.
The opening for the mains power is big enough for 3x0.75 (or 3x18AWG for all across the Atlantic Ocean) H03VV-F cable (or any three wired stranded sheathed cable)
I used it to power the Raspberry Pi of my ender 3 and conneted it to the C14 plug of the 24V PSU of the printer, thus with one AC power cable to the printer I power everything on it.
Hope it is useful.
Similar models
thingiverse
free
Cubieboard Tower Case - Power Supply Unit Addon by viresx
...wer case - power supply unit addon by viresx
thingiverse
psu section for meanwell rs-15-5 5v 3a power supply.
model in openscad.
thingiverse
free
Ender 3 Pro Power Supply Mount by ImDerpyHooves
...lso offset the inside faces for a little looser fit. the one i made was very tight and hard to remove once the psu was installed.
thingiverse
free
Anet A8 Adapter for MeanWell 350-12 Power Supply by esquivel
...h power supply to the bracket, 3 m3 nuts (also left over) and the original psu m3 bolts to mount the power supply on the printer.
thingiverse
free
Case for Meanwell RS-25-5 by JustinX
... cable and 2x usb power cable.
i use the power supply to power two raspberry pi 3+ with repetier servers.
dimensions: 120x57x33mm
thingiverse
free
Anet A8 Mounting Bracket for a MeanWell NES-350-12 Power Supply by mskressin
...bracket to the power supply. then you can simply put the m3 screws through the existing holes in the frame to attach the bracket.
thingiverse
free
Adapter Base/ Mounting Plate for Meanwell LRS-350-12 on Anet A8 frame by Bouillon_CR
...an anet a8. sets the power supply to a similar hight as the orinigal one. 4 x m4x10 screws...
grabcad
free
Meanwell HDR 15 Series PSU
...meanwell hdr 15 series psu
grabcad
close approximation of the meanwell 15 series power supply.
thingiverse
free
Meanwell Power Supply Cover by Mochery
...d supply for a custom printer build. fits supply exactly. printed in petg with 20% infill / 3 perimeters / 5top/5bottom layers.
thingiverse
free
Anet A8 Power Supply Cover incl. fused C-14 power socket, 2 channel Relais and RS-15-5 5v Power supply by caesar_1111
...)
as always i included the freecad model.
caesar
ps: be careful when clipping in the rs-15-5 since the clips as somehow fragile.
thingiverse
free
Case for Meanwell LRS 35
...case for meanwell lrs 35
thingiverse
you will need m3 screws.
should fit all lrs 35 power supplies.
Meanwell
thingiverse
free
Meanwell LRS Mount by vasiok677
...meanwell lrs mount by vasiok677
thingiverse
meanwell lrs power supply mount.
thingiverse
free
Cover PSU Meanwell
...ver psu meanwell
thingiverse
cover for psu meanwell in order tu silent this.
replace the original one with a silent fan 60 x 25.
thingiverse
free
Meanwell SD-15C-12 MODEL
...meanwell sd-15c-12 model
thingiverse
meanwell sd-15c-12
thingiverse
free
Meanwell NES-350 Power Supply
...meanwell nes-350 power supply
thingiverse
meanwell-nes-350-12-dimensions
thingiverse
free
Meanwell psu drilling guide by R91WRD
...meanwell psu drilling guide by r91wrd
thingiverse
drilling guide for meanwell power supply's
thingiverse
free
Meanwell LRS-350 power supply cover
...meanwell lrs-350 power supply cover
thingiverse
cover for meanwell power supply lrs-350
thingiverse
free
Meanwell LRS-350 wall mount by lukeskymuh
...meanwell lrs-350 wall mount by lukeskymuh
thingiverse
wallmount for the meanwell lrs-350 power supply.
thingiverse
free
Meanwell PS Right Angle Mount
...well ps right angle mount
thingiverse
right angle mount for a meanwell power supply. print at least two, one for top and bottom.
thingiverse
free
Meanwell SP-320-36 Cover by obelix
...meanwell sp-320-36 cover by obelix
thingiverse
psu cover for the meanwell sp-320-36. not tested yyet.
thingiverse
free
Meanwell mounting bracket by didjareally
...the meanwell lrs series power supplies, may fit other series as well. keeps the power supply 1/4" off the mounting surface.
Rs
3d_export
$5
ford-focus rs
...ford-focus rs
3dexport
ford-focus rs
turbosquid
$25
Borbet RS
...
turbosquid
royalty free 3d model borbet rs for download as on turbosquid: 3d models for games, architecture, videos. (1381610)
turbosquid
$4
RS-12
...royalty free 3d model rs-12 for download as max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1311369)
turbosquid
$4
RS-21
...royalty free 3d model rs-21 for download as max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1311374)
turbosquid
$1
BBS RS
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$1
RS-MMC
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
free
Samsung RS 552 NRUA1J
...samsung rs 552 nrua1j
3ddd
холодильник , samsung
samsung rs 552 nrua1j
3d_ocean
$89
Audi TT RS
...special one at that. arriving at dealerships this summer, the audi tt rs has a turbocharged 2.5-liter engine with direct gasol...
turbosquid
$60
RS - Coffee Table
...
royalty free 3d model rs - coffee table for download as skp on turbosquid: 3d models for games, architecture, videos. (1298781)
3d_export
$69
chevrolet camaro rs
...chevrolet camaro rs
3dexport
chevrolet camaro rs car colour: yellow, blue, red and steel poly: 1 081 792 verts: 1 122 164
15
3d_export
$5
Iphone 15
...iphone 15
3dexport
apple iphone 15
3ddd
$1
Bed 15
...bed 15
3ddd
постельное белье
bed 15
design_connected
$13
Ella 15
...ella 15
designconnected
delightfull ella 15 computer generated 3d model.
design_connected
$27
Kilt 15
...kilt 15
designconnected
zanotta kilt 15 computer generated 3d model. designed by progetti, emaf.
design_connected
$22
Domino 15
...domino 15
designconnected
zanotta domino 15 computer generated 3d model. designed by progetti, emaf.
design_connected
$9
SMTV 15
...smtv 15
designconnected
maxalto smtv 15 computer generated 3d model. designed by citterio, antonio.
design_connected
$25
Docks 15
...docks 15
designconnected
gandia blasco docks 15 computer generated 3d model. designed by romero vallejo.
turbosquid
$23
15 Ducks 15 Pond [Ducks and Set]
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
design_connected
$7
Bolla 15
...bolla 15
designconnected
gervasoni bolla 15 coffee tables computer generated 3d model. designed by michael sodeau.
3ddd
$1
Curtains 15
...curtains 15
3ddd
curtains 15
polys: 331066
other models:http://3ddd.ru/users/brast/models
5
turbosquid
$6
Rock 5-5
...urbosquid
royalty free 3d model rock 5-5 for download as obj on turbosquid: 3d models for games, architecture, videos. (1639063)
3d_export
$5
hinge 5
...hinge 5
3dexport
hinge 5
turbosquid
$10
A-5
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$2
A-5
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$12
Calligraphic Digit 5 Number 5
...hic digit 5 number 5 for download as max, obj, fbx, and blend on turbosquid: 3d models for games, architecture, videos. (1389333)
3ddd
$1
5 роз
...5 роз
3ddd
5 роз в стеклянной вазе
design_connected
$11
iPhone 5
...iphone 5
designconnected
apple iphone 5 computer generated 3d model.
3ddd
$1
Lola 5
...lola 5
3ddd
miniforms
lola 5 miniforms 300*65*134
3ddd
$1
Nexus 5
...dd
nexus , phone , телефон
google nexus 5 phone
3d_ocean
$15
iPhone 5
...iphone 5
3docean
3d 4d apple cinema iphone model modeling phone screen texture
iphone 5 3d model and texture realistic iphone 5.