Thingiverse
Maze Solver by Sapm
by Thingiverse
Last crawled date: 4 years, 7 months ago
https://youtu.be/Ddkci5myxYI
This is a current working project. It's a 3D printed Maze Solver and Line Follower based on the Pololu 3Pi robot.
It uses a Arduino Leonardo and a custom made shield.
Materials:
Arduino Leonardo
L293D
Piezo Buzzer
QTR-1RC Reflectance Sensor (2-Pack) x 2 (https://www.pololu.com/product/2459)
QTR-8A Reflectance Sensor Array (Only the cutted 2 sensor at the left) https://www.pololu.com/product/960
75:1 Micro Metal Gearmotor HPCB 6V (https://www.pololu.com/product/3064)
Pololu Wheel 42×19mm Pair (https://www.pololu.com/product/1090)
Pololu Micro Metal Gearmotor Bracket Pair
(https://www.pololu.com/product/989)
Pololu Ball Caster with 1/2″ Metal Ball (https://www.pololu.com/product/953)
2-AA Batteries
2-AA Battery Holder (https://www.pololu.com/product/1150)
I can send the arduino Code if needed!!
Good Printing and Best Regards!!
This is a current working project. It's a 3D printed Maze Solver and Line Follower based on the Pololu 3Pi robot.
It uses a Arduino Leonardo and a custom made shield.
Materials:
Arduino Leonardo
L293D
Piezo Buzzer
QTR-1RC Reflectance Sensor (2-Pack) x 2 (https://www.pololu.com/product/2459)
QTR-8A Reflectance Sensor Array (Only the cutted 2 sensor at the left) https://www.pololu.com/product/960
75:1 Micro Metal Gearmotor HPCB 6V (https://www.pololu.com/product/3064)
Pololu Wheel 42×19mm Pair (https://www.pololu.com/product/1090)
Pololu Micro Metal Gearmotor Bracket Pair
(https://www.pololu.com/product/989)
Pololu Ball Caster with 1/2″ Metal Ball (https://www.pololu.com/product/953)
2-AA Batteries
2-AA Battery Holder (https://www.pololu.com/product/1150)
I can send the arduino Code if needed!!
Good Printing and Best Regards!!