Thingiverse
MAZDA MIATA MX5 WATER TANK COVER AND MIRROR SLAT
by Thingiverse
Last crawled date: 5 years, 7 months ago
In order to produce the Mazda Miata MX5 water tank cap and mirror moldings, the original mirror strip had to be transferred to the computer. For this, with the measurements we have made with the caliper, we have detailed the bar as left and right, as well as the water tank cover in detail and as stl.
After pressing the G-codes (with Cura) BeamUP3D S, which we prepared to print the mirror laths with black Copolyester and the water tank cover with Flex filament, we cleaned the supports on the laths and installed them in the vehicle. We used the slats in the vehicle without any surface treatment.
After pressing the G-codes (with Cura) BeamUP3D S, which we prepared to print the mirror laths with black Copolyester and the water tank cover with Flex filament, we cleaned the supports on the laths and installed them in the vehicle. We used the slats in the vehicle without any surface treatment.