Thingiverse
Mask_MouthNose_Divisor by IkeAquila
by Thingiverse
Last crawled date: 4 years, 8 months ago
While using the normal surgical masks I suffered from headaches, I read that one cause could be the fact that using the surgical masks for a long time you inhale carbon dioxide. I then created this divider and glued it (hot glue) inside the face mask. Breathing through my nose and exhaling through my mouth now I no longer have a headache. Use at your own risk, if you want to create derived or commercial projects you are welcome: Jesus said that it is our duty to love and help others… which is the historical reason why hospitals were born. Let's love and help humanity! : )
NOTE:
It is necessary to readjust the size and shape of the 3D model to your face. I use a piece of tin wire to take the profile just under the nose, then I take a picture of the wire and scale the 3D model (eg .jpg->inkscape->.svg> tinkercad>scale model till overlaps the svg model ) to fit the face.
The created model is a bit annoying in contact with the skin (raw plastic). I apply a patch between the plastic and the skin.
NOTE:
It is necessary to readjust the size and shape of the 3D model to your face. I use a piece of tin wire to take the profile just under the nose, then I take a picture of the wire and scale the 3D model (eg .jpg->inkscape->.svg> tinkercad>scale model till overlaps the svg model ) to fit the face.
The created model is a bit annoying in contact with the skin (raw plastic). I apply a patch between the plastic and the skin.